Thank you! I use a big variety of editing programs depending of the sort of video I am trying to do. For this one I used capcut as the speed ramping is very easy to do as using the quick curvers in Capcut! Thanks for your comment!
Thanks for replying! I really enjoyed your latest video about the 25v2 for real estate but I think I’m going to stick with the dji avata with the GoPro 11 mini as I’ve already have all the kit. One day I’ll get a real FPV drone but my main focus is definitely indoor flying. Look forward to seeing more from you!
@@JoeKilmister thank you so much g! Really appreciate that, avata 1 with gopro might be hard to control indoors i feel like, although i never flown an avata before. GoPro 11 should give some sick quality with the 10 bit color and 8:7 though! Happy flying :)
Thanks for your comment! In this video I used auto ISO, auto shutter, and auto white balance. basically auto everything which is why you may see some fluctuations. Although I checked it and dont really notice anything!🫣 happy flying!
Make sure you are flying very stable, for indoors I fly mostly in angle mode especially in smaller rooms when you need to do a lot of turning this is important. Also I never go above 0.1 smoothness in gyroflow and horizon lock it to 50%, you can go a little higher but I would never go to 100% horizon lock! Happy flying!
I usually land at 3.55v and for indoor flights i got around 5 minutes with a 650 pack, i would have done a test for you until 3.7v but unfortunately its with the fish now 😅
I use the stock tune from axisflying and max rates set to 500, angle mode for indoors and a throttle limit & curve, did you try gyroflow? Removes all your vibrations, if not check ur soft mounting and tighten ur screws!@@Raph333
@@FrankFPV thanks for the reply! One month later i fly accro inside no problem With power limit 60 and some expo in the throttle Also low rates for inside
Weight and convenience with camera settings. Those are two things O3 is good at. With all the rest GoPro i much better. O3 video quality, low light performance, dynamic range, gyro data for gyroflow are all mediocre at best.
Thanks for sharing! I unfortunately broke my naked gopro so I had to do a few jobs with just the O3 and had to make the most out of it. Now I fixed it and am back to flying with naked gopro! Now I can put my O3 OSD back to 16:9 instead of 4:3 and turn of D-cinelike! So happy!
Nice job! Did you use any nd filter ?
I did not! O3 is already bad in low light and did not want to make it worse
Thay flat pan in the tight bathroom at the end..skills
Appreciate it my guy! Felt like it looked better than doing full 360's
Hey, what editing software do you use ? I like the speed rams. Great video!
Thank you! I use a big variety of editing programs depending of the sort of video I am trying to do. For this one I used capcut as the speed ramping is very easy to do as using the quick curvers in Capcut! Thanks for your comment!
Thanks for replying! I really enjoyed your latest video about the 25v2 for real estate but I think I’m going to stick with the dji avata with the GoPro 11 mini as I’ve already have all the kit. One day I’ll get a real FPV drone but my main focus is definitely indoor flying. Look forward to seeing more from you!
@@JoeKilmister thank you so much g! Really appreciate that, avata 1 with gopro might be hard to control indoors i feel like, although i never flown an avata before. GoPro 11 should give some sick quality with the 10 bit color and 8:7 though! Happy flying :)
Great. Color temp is fix?
1:21 what happend here?
Thanks for your comment! In this video I used auto ISO, auto shutter, and auto white balance. basically auto everything which is why you may see some fluctuations. Although I checked it and dont really notice anything!🫣 happy flying!
How do you manage to use horizon lock in gyroflow with O3 ? I get crooked horizon every time. It’s drifting more and more to one side.
Make sure you are flying very stable, for indoors I fly mostly in angle mode especially in smaller rooms when you need to do a lot of turning this is important. Also I never go above 0.1 smoothness in gyroflow and horizon lock it to 50%, you can go a little higher but I would never go to 100% horizon lock! Happy flying!
Hello. How long does this drone fly without a GoPro with a fully charged 650 mAh battery to 3.7 volts?
I usually land at 3.55v and for indoor flights i got around 5 minutes with a 650 pack, i would have done a test for you until 3.7v but unfortunately its with the fish now 😅
@@FrankFPV Thank you! Thanks to your data, I got a result of about 3 minutes 50 seconds using mathematical calculations. Try Gemfan D63 propellers 🙂
Cool, where in corfu are you? I live in ipsos.
Staying in Acharavi until the end of April!
Heel gaaf! Kan makkelijk de o3 air unit gebruiken voor real estate als ik dit zo zie😅
Is de cinewhoop van axisflying goeie?
jaaman, met een kleine throttle curve is hij heel smooth indoor
Can you share your rates and throttle? I just bought a cineon 25!
Also i see a but of vibration sometimes in my footage.. Not sure why
I use the stock tune from axisflying and max rates set to 500, angle mode for indoors and a throttle limit & curve, did you try gyroflow? Removes all your vibrations, if not check ur soft mounting and tighten ur screws!@@Raph333
@@FrankFPV thanks for the reply! One month later i fly accro inside no problem
With power limit 60 and some expo in the throttle
Also low rates for inside
Weight and convenience with camera settings. Those are two things O3 is good at. With all the rest GoPro i much better. O3 video quality, low light performance, dynamic range, gyro data for gyroflow are all mediocre at best.
Thanks for sharing! I unfortunately broke my naked gopro so I had to do a few jobs with just the O3 and had to make the most out of it. Now I fixed it and am back to flying with naked gopro! Now I can put my O3 OSD back to 16:9 instead of 4:3 and turn of D-cinelike! So happy!
Ist Not a nice House, sorry
Thats a shame.. I really liked the interior!