Awesome video! Wish I saw this before I took everything apart. Very detailed and shows everything. Thanks for the video, hopefully I can fix whatever I messed up.
Great job. Very helpful the way you did this. For the drivers side low beam you have to pull at least the front edge of the wheel well to get to the bulb and replace it.
Bro that high beam and low beam are by far the hardest lights I’ve ever changed on any car. I’m glad to have this video to watch if I ever do it again blindly. Also do you know if the 2010 w207 uses the same turn signal bulb or is it a different style?
Прекрасна робота, все показав що і як. Відео великої якості і показав в таких місцях де тяжко пальцями достати а він ще й камерою зміг все показати. Молодець, прекрасна робота !!! Велике дякую,.!!!
Great job on this video. I understand the problems associated with trun signal canisters 212 2008.e350...which both do not wk now.after new turn signal cannisters. Trying not to buy new headlights. Any tips or tricks to get them wk n again w out new ones? Thanks
Hey dude.. So I have a slight issue with my headlights... I have error message on dash saying left low beam is out.. So I went to change it and saw that the headlight cover was off, it somehow fell off and was laying around in the wheel well... So I tried new light build it didn't work.. So then I ordered a ballast (not oem) but had good reviews. When I took off my old ballast the contacts were moist and mildew and ballast was full of water. So I figured it would work with the new ballast. After I installed the ballast I turned on the car and the headlight worked.. After assembly of everything I turned on the car for second time and headlight not working again......
Perhaps you can give me some guidance. I want to change the DRLs on my 2009 from the circle shape to the straight line shape. Do I need to replace the entire bumper or just the housing for the bumper?
Always well done video, congratulations. But I would like to know how to change the bulbs on the opposite side (passenger side), in fact it is difficult to access.
Such great videos on W212, I just picked up a 2010 and these are so helpful. I'm replacing the bulbs b/c the PO did not secure them, properly and I'm missing the retaining clips. Do happen to know the part number for the retaining clips for both low and high beams? Thanks.
What i dont really understand is this Lights at Low Beam ? For example in night time when you Put your Car Lights on there is this second bulb which glow aswell, is this also a H7 ?
@@MB212 thank you my friend i Just Watched your Led Upgrade Video again i got me The Osram now i will buy The can Bus Decoder Last week sunday I tinted my Windows Looks much more Clean
If you meant at driver side is same procedure as I show here, but is so tight space is not easy to video it. But is possible without removing the wheel and cover.
@@MB212 thank you so much for your answer. Also, i just got my passenger side lights completely replaced by dealer due to an accident (not my fault) . The new lowbeam has a white yellowish color. The old one (driver side) purple-ish. Do xenon lights change color in time? (Read something about this). Do think i need a new bulb light just to match the colors. Am i right?
No worries! Yess always change both unit at the same time is common practice especially for xenon lights, it sounds for sure is been running for a long time and need replace anyway!
Just switched to led headlights bulbs and now I’m getting a check low beam warning but the lights all work any suggestions would be hella appreciated🙏🏼
1:31 to 1:33. Two seconds of misery. I believe this is off the car or a wheel well was removed. I have tried till I bled to get that bulb holder to align and rotate under the two ears. The size of my hands and the space between the wheel well and the headlamp port is so small. No one in these videos actually explain a good way to seat the new bulbs and holders. For a Mercedes this is a real cheap out design. Thanks Chrysler.🤨
It is kind of hard for me to explain in English and pretty hard to video it because of the tight space but you figure it out after you have try for a while as long you don’t have really big hands it should go. This apply for halogen bulb.
Not really! Open the cover and when you get the grip on the bulb/adapter twist it and you hear when is coming lose then you taking it out with the cables!
I removed the tire and a few clips on the fender liner and pulled it back for access. It's a little bit of work (if you can call it that), but access is beautiful once you do that. You can try just turning the steering wheel and moving back the fender liner, but it was still not a lot of space. Some, but not all models have an access door in the fender liner.
Hello,Bro. This is kevin from Joyeauto Technology. We have some questions about your job. 1. Are you a installer? Do you want to discuss business cooperation with someone?? 2. Do you have many customer have Audi BMW Porsche Mercedes Volkswagen Infiniti Land Rover Bentley Jeep Nissan Lexus etc, right? 3. Have you heard about wireless apple carplay and Android auto, Android Multimedia Box before?
Thanks!
Thanks a lot for the super thanks and also the first one here on the channel : )
Wow that's Amazing. I look forward to all your content. And a Monetized Thank you for all the work you put in to your Tutorials.
It means a lot and also invested back on the channel : )
What a brilliantly conceived video! Great camera work...and adding the part # and description is incredibly helpful. Thank you very, very, much!!!
Awesome video! Wish I saw this before I took everything apart. Very detailed and shows everything. Thanks for the video, hopefully I can fix whatever I messed up.
Great job. Very helpful the way you did this. For the drivers side low beam you have to pull at least the front edge of the wheel well to get to the bulb and replace it.
Bro that high beam and low beam are by far the hardest lights I’ve ever changed on any car. I’m glad to have this video to watch if I ever do it again blindly. Also do you know if the 2010 w207 uses the same turn signal bulb or is it a different style?
Yeah the H7 bulb I hate it I hate it I hate it
Прекрасна робота, все показав що і як. Відео великої якості і показав в таких місцях де тяжко пальцями достати а він ще й камерою зміг все показати. Молодець, прекрасна робота !!! Велике дякую,.!!!
Great job on this video. I understand the problems associated with trun signal canisters 212 2008.e350...which both do not wk now.after new turn signal cannisters. Trying not to buy new headlights. Any tips or tricks to get them wk n again w out new ones? Thanks
Thanks man, just replaced my 2010 E550 passenger-side Parking Light with genuine Osram from Germany ha. 👍🏼
Well done! Osram is a good brand 👍
A little tip on my coupe if u take off the tire or turn the wheel there’s like a small window to access the low beam bulb 💡
That’s nice add to bad they not put in this model.
@@MB212 Correct. Depends on model and year.
The H7 bulbs are the hardest to change 😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡😡
Impossible 😖
I have pretty big hands It's almost impossible to reach the bulb and the twist is pain in the ...
Do you have to disconnect the battery?
Hey dude.. So I have a slight issue with my headlights... I have error message on dash saying left low beam is out.. So I went to change it and saw that the headlight cover was off, it somehow fell off and was laying around in the wheel well... So I tried new light build it didn't work.. So then I ordered a ballast (not oem) but had good reviews. When I took off my old ballast the contacts were moist and mildew and ballast was full of water. So I figured it would work with the new ballast. After I installed the ballast I turned on the car and the headlight worked.. After assembly of everything I turned on the car for second time and headlight not working again......
Perhaps you can give me some guidance. I want to change the DRLs on my 2009 from the circle shape to the straight line shape. Do I need to replace the entire bumper or just the housing for the bumper?
Always well done video, congratulations. But I would like to know how to change the bulbs on the opposite side (passenger side), in fact it is difficult to access.
Yess is difficult but is the same way around I show here have done it but is tricky and take some time to get it first.
I have been waiting for this! 👍🏻
I’m going to change my blinking lights to led.
Thanks a lot brother! 💪🏻🙏🏻
👌👌👌
Hello
how they look like now i want to do the same
@@TheGo4live It look 10 times better my friend!
It is much brighter and much more modern looking. This is a ‘must’ !
@@SickXPsychoo thank you,
Such great videos on W212, I just picked up a 2010 and these are so helpful. I'm replacing the bulbs b/c the PO did not secure them, properly and I'm missing the retaining clips. Do happen to know the part number for the retaining clips for both low and high beams? Thanks.
In Saudi you have to buy the whole headlight which cost around 800$ 😅 even if a single bulb not working. So Thank u so much..
Thank you for your video, very helpful - as I like trying to things myself
Excelent! Thanks very much!
What i dont really understand is this Lights at Low Beam ? For example in night time when you Put your Car Lights on there is this second bulb which glow aswell, is this also a H7 ?
You mean the position light that’s are in the high beam reflector? Not sure why they are needed really, but some kinda of law here they need to work.
@@MB212 thank you my friend i Just Watched your Led Upgrade Video again i got me The Osram now i will buy The can Bus Decoder Last week sunday I tinted my Windows Looks much more Clean
Bro...how do u change the led light??? Mine dont work...!!
Hi 👋
I changed mine but my lights are flashing. Why ??🤔
Would you make a video of the adaptive headlights
Could not don’t have any access to adaptive lights.
How did you reach the lowbeam h7 light without removing the wheel?
If you meant at driver side is same procedure as I show here, but is so tight space is not easy to video it. But is possible without removing the wheel and cover.
@@MB212 thank you so much for your answer. Also, i just got my passenger side lights completely replaced by dealer due to an accident (not my fault) . The new lowbeam has a white yellowish color. The old one (driver side) purple-ish. Do xenon lights change color in time? (Read something about this). Do think i need a new bulb light just to match the colors. Am i right?
No worries! Yess always change both unit at the same time is common practice especially for xenon lights, it sounds for sure is been running for a long time and need replace anyway!
@@MB212 thanks a lot for the answers, now to get the right parts
@@MB212 what kind of brand do you recommend?
Very good video, thanks
The halogen low beam and high beam are both H7s?
Also, how do you reach the low beam on the left side?
Yess both H7 is really hard but is possible hard to explain. You could also doing it after you remove wheel base cover.
Just switched to led headlights bulbs and now I’m getting a check low beam warning but the lights all work any suggestions would be hella appreciated🙏🏼
I'm guessing your CANbus is at fault. Try the PHILIPS Headlight LED CANbus Adaptor for H7 works fine for me with no warnings.
@@klemanso Ayye thank you thats the exact yessir I have it otw
1:31 to 1:33. Two seconds of misery. I believe this is off the car or a wheel well was removed. I have tried till I bled to get that bulb holder to align and rotate under the two ears. The size of my hands and the space between the wheel well and the headlamp port is so small. No one in these videos actually explain a good way to seat the new bulbs and holders. For a Mercedes this is a real cheap out design. Thanks Chrysler.🤨
If you notice, the two locking tabs are not 180˚ apart, more like 160-170˚, so they have to be orientated to the housing correctly.
very helpful thank you
This helped thank you sir !
👍👍👍
Thanks so much ❤
А как выглядит когда и ближний и дальний свет в одном месте? Ксеноновая фара
How did you get access to the driver side bulb from the top of the car ?
It is kind of hard for me to explain in English and pretty hard to video it because of the tight space but you figure it out after you have try for a while as long you don’t have really big hands it should go. This apply for halogen bulb.
@@MB212 I would have to disconnect a few things though right ?
Not really! Open the cover and when you get the grip on the bulb/adapter twist it and you hear when is coming lose then you taking it out with the cables!
@@MB212 Ok thank you man, appreciate the response!
I removed the tire and a few clips on the fender liner and pulled it back for access. It's a little bit of work (if you can call it that), but access is beautiful once you do that. You can try just turning the steering wheel and moving back the fender liner, but it was still not a lot of space. Some, but not all models have an access door in the fender liner.
Buy links!
Osram blinker bulb amzn.to/32pKog9
Osram low beam amzn.to/2U8IkEM
Osram position amzn.to/3n1HHcL
Osram high beam amzn.to/2U8IkEM
Are both low and high beam h7
Yess
Great video thanks
Hello,Bro.
This is kevin from Joyeauto Technology. We have some questions about your job.
1. Are you a installer? Do you want to discuss business cooperation with someone??
2. Do you have many customer have Audi BMW Porsche Mercedes Volkswagen Infiniti Land Rover Bentley Jeep Nissan Lexus etc, right?
3. Have you heard about wireless apple carplay and Android auto, Android Multimedia Box before?
Hobby installer, yess heard about these system. May be interested send me more information to my mail om651benz@yahoo.com
@@MB212 Can you tell me your whatsapp? I will send more information to you email now.
Спасибо огромное!!!
Thank you so much, you are really good.👍🏻🫵🏻