Good idea for this jig. I like it. I also like your voice - you've got a great-sounding "radio" voice. Personally, I could do without the music, or at least turn the volume down, but that's just my personal taste. Thanks for the video!
Thank you very much for the compliment. i appreciate that. I am very happy to receive suggestions. Do you think a another kind of music would be working better?
I don't know if another type of music is good or bad - everyone's taste in music is different, so use what you like - it's your channel, after all! You can't please everyone, so don't even try. But I think it's too loud. When you stop talking and the music volume turns up, I feel like I'm out at a dance club. :) Try listening with headphones, and you'll see what I mean.
I agree. I don't want any music. The only sound I want to hear is the sound the tool makes or the person's voice to narrate the steps in the project, and if the tool is really loud, then turn down the gain on the mic, or lower the volume during editing. No friggin' music.
@@ISIMPLYBUILTIT Yes, I agree. You are very smart guy and don't need the bad music to make a good video. Trust in your ability and it will speak for itself.
This is definitely better than the Forstner bit one I've seen. I was thinking about it earlier about how to do it on the bandsaw. I was thinking of mounting the piece to be cut on top of the circle base at an offset so just the bottom of the circle is on the base, and that would get the semicircle cut on the top piece. I was trying to use the jig I already have to cut circles. It works but for circles with a radius of 2"+. If the wing nut is too big, what about a thumbscrew?
Great video, so, don't stop the music just because some don't like it, it's what makes you, you. Maybe turn it down a bit. Very good details, and voice.
I have subscribed through your other videos. I am a big fan of your work now! But, sincerely, kill the music on this video, and eliminate the frantic high-speed repetitive actions. Viewers would rather see you do one example at normal speed with full commentary even if you have you round it out with your opinions about qualities of plywood, proper angles for bit sharpening, etc. We come here to hear from you. And again, I LOVE your work and ideas (but this one is really a 2-minute , eyeball, bandsaw job if you’re not German, right?😊).
wenn du schon die Originalquelle angibst (John Heisz) und diese Anleitung schon in englischer Sprache vorliegt, ...warum hast du dann nicht eine deutschsprachige Version gemacht??? Gruß, Robert
Ganz einfach. Weil ich mich ganz am Anfang dafür entschieden habe englisch zu sprechen, da meine ersten Abonnenten englisch sprechend waren. Ich habe aber vor noch einen zweiten deutschen Kanal zu machen. Da werden alle Videos in deutsch veröffentlicht. Ich muss nur noch die Zeit dazu finden. 😁
Wenn man schon so einen extremen deutschen Dialekt hat, sollte man seinen Sprachwurzeln treu bleiben. Der Jig ist eh eine Kopie asiatischer "Carpenters", die halten wenigstens den Mund. Schlechte Präsentation, hektische Bilder, bad grammar, nervige Musik. So was ist unmöglich zu abonnieren.
Good idea for this jig. I like it. I also like your voice - you've got a great-sounding "radio" voice. Personally, I could do without the music, or at least turn the volume down, but that's just my personal taste. Thanks for the video!
Thank you very much for the compliment. i appreciate that.
I am very happy to receive suggestions. Do you think a another kind of music would be working better?
I don't know if another type of music is good or bad - everyone's taste in music is different, so use what you like - it's your channel, after all! You can't please everyone, so don't even try.
But I think it's too loud. When you stop talking and the music volume turns up, I feel like I'm out at a dance club. :) Try listening with headphones, and you'll see what I mean.
Thank you for your answer. I will pay more attention to the volume at the next video.
neat idea!
but I would design the jig with three guide holes for the hole saw so that you cut all three notches in more or less one step
Turn off the annoying music please. Good videos.
Thank you. In future videos there will be another type of music, just quieter.
I agree. I don't want any music. The only sound I want to hear is the sound the tool makes or the person's voice to narrate the steps in the project, and if the tool is really loud, then turn down the gain on the mic, or lower the volume during editing. No friggin' music.
you5711 WHY do so many woodworking videos have to have background music in their programs? I consider this instruction, not entertainment.
@@ISIMPLYBUILTIT Yes, I agree. You are very smart guy and don't need the bad music to make a good video. Trust in your ability and it will speak for itself.
This is definitely better than the Forstner bit one I've seen. I was thinking about it earlier about how to do it on the bandsaw. I was thinking of mounting the piece to be cut on top of the circle base at an offset so just the bottom of the circle is on the base, and that would get the semicircle cut on the top piece. I was trying to use the jig I already have to cut circles. It works but for circles with a radius of 2"+. If the wing nut is too big, what about a thumbscrew?
I really enjoyed the way you made these star knobs. You got yourself a new subscriber!
I like the vise under the work bench, do you have something on it
Your very creative and I've made quite a few of your inventions
Thank you so much :)
Thanks. I'm glad to read that
Great jig and very detailed video ! Thanks for sharing!
Thanks!
Really enjoying your channel
Thank you so much.
500 points for the under bench vice !!!!
Nice jig but I love the fitting for your engineering vice!
Thanks
Love the video but the music is way to loud my friend.
Thanks. In newer videos are no music anymore
Yes. The music is too loud
Traduire en Francais.Mercie
That music !!!!!
Excelente video, good 👍
Informative video, however the extremely annoying music makes viewing the video till the end very challenging...
Yeah....i know. It was in the beginning of my UA-cam Channel. In newer videos there's another type of music and not so loud anymore.
Nice job!!
Thank you
Great videos but please drop the music it's not needed
Thanks. In newer videos, there are no more music.
@@ISIMPLYBUILTIT Good to hear it ( LOL or not hear it ) keep up the good work
Great video, so, don't stop the music just because some don't like it, it's what makes you, you. Maybe turn it down a bit. Very good details, and voice.
Thank you.
I have subscribed through your other videos. I am a big fan of your work now! But, sincerely, kill the music on this video, and eliminate the frantic high-speed repetitive actions. Viewers would rather see you do one example at normal speed with full commentary even if you have you round it out with your opinions about qualities of plywood, proper angles for bit sharpening, etc. We come here to hear from you. And again, I LOVE your work and ideas (but this one is really a 2-minute , eyeball, bandsaw job if you’re not German, right?😊).
wenn du schon die Originalquelle angibst (John Heisz) und diese Anleitung schon in englischer Sprache vorliegt, ...warum hast du dann nicht eine deutschsprachige Version gemacht???
Gruß, Robert
Ganz einfach. Weil ich mich ganz am Anfang dafür entschieden habe englisch zu sprechen, da meine ersten Abonnenten englisch sprechend waren. Ich habe aber vor noch einen zweiten deutschen Kanal zu machen. Da werden alle Videos in deutsch veröffentlicht. Ich muss nur noch die Zeit dazu finden. 😁
👍👍
Thanks
Interesting but the excuse for music detracts from the video content.
very good video but what is the music for except annoying the viewer. Please when something is not needed adding it makes a waste of your efforts.
I know. In the mean time i use another type of music and it plays not more so loud. Thank you anyways.
i liked the video but you need to lose the music
Music is too loud.
Great vid pity about that awful noise(musak)
You are an ingenious woodworker and craftsman, but we can do without the terrible background music.
Thank you so much. In newer videos are no music anymore.
@@ISIMPLYBUILTIT Keep up the great work and videos. Good stuff!
Bloody annoying background music. Couldn't hear him talk when I tried turning the music volume down. Gave up in the end and went to another site.
Turn off the music!!!
Ditch the music, it’s annoying and it makes it hard to hear what your saying; otherwise good jig
is this a John Heisz copy cat channel?
The music is annoying, especially with the volume changing!
Very similar to John heize(ibuildit) jig and numerous others.... except you have annoying music 👎
Please turn off the music. I had to stop watching it was so annoying.
In newer video there are no music anymore.
Bloody music
The music made this unwatchable!
Turn the music off so we can hear you
Way too complicated!
Wenn man schon so einen extremen deutschen Dialekt hat, sollte man seinen Sprachwurzeln treu bleiben. Der Jig ist eh eine Kopie asiatischer "Carpenters", die halten wenigstens den Mund. Schlechte Präsentation, hektische Bilder, bad grammar, nervige Musik. So was ist unmöglich zu abonnieren.
Get rid of the music. We are not here to listen to music over your voice. Prefer to concentrate on what you are doing.
Crappy music.
I know 😝. In newer videos there are another type of music and just in the background. And in future videos are no more music.
@@ISIMPLYBUILTIT Great! And kick-ass build btw!
lose the F===ing music - THUMBS DOWN
In newer videos, there are no more music.
Bitte auf deutsch 😉(Spaß)
:-)
annoying music
Get rid of the stupid music
stop the music
In newer videos there are another type of music and just in the background. And in future videos are no more music.