Hi Craige, very useful video, thank you ! I have one of these optics but cannot get the Screen Shift to work and align at all, despite indexing to maximum both ways and ensuring long hold R/H button to save and exit menu. Any suggestions welcome - does yours actually work ? 🤔
Thanks for sharing, great tutorial. The Thermal Hotspot tracking feature will place the red dot on the hot heat sources that are in the viewfinder. The dot moves about highlighting the hot spots . All the best
Thanks for the feedback on the Thermal Hotspot Tracking. I did find out a few days later after the video was published. I invite you to subscriber to my channel if you have not done so already.
Well thanks for stopping by. Its a great little scope that every time I use it, I am liking it more and more. If you have not done so already, I invite you to subscribe.
input the data for load in app upload data from phone to scope via wifi distance is set by your zero distance , usually 100 yard zero... once its done , you aim at target and push laser button ranging is done and gives a distance , new reticle (range solution ) appears on reticle ....use that and take shot at target .
@@ShotintheDark-lk1ps Do you use your shooting reticle to point at the target when trying to get the range with the range finder or do you point the ranging reticle at the target? The reason i ask is because when pointing the shooting reticle at the target the range is correct, but when pointing the ranging reticle at the target the range finder is reading 120yds at 100yds.
Thank you for this video. You were much more in-depth with the details than others I've seen! I noticed that you have a Zulus, which I have also, and was wondering how you'd compare NV on them.
Its about the same. I have not put too much into the looking at the differences between the 2. Stay tuned for more videos coming up with the new scope. I invite you to subscribe if you have not already done so.
@4:40, just an FYI, that is military time. It was not 11:23. It was actually 11:11, since 2300 hours is 11 o' clock pm. These videos are fantastic, btw. Very helpful videos.
Hey thanks for stopping by and commenting. I did realize that was the time after I posted the video. Had a little laugh at myself when I saw it. PS. If you have not subscribed already, I invite you to please do so.
Can you connect the app and take a screen shot of the menus not showing the Bluetooth settings. What model scope do you have? send email to cloAdventures@oldani.org
@@stephenling4579 It’s the same way you turn it on. HOLD the picture-in-picture button for 3 seconds. Glad you stopped by and liked the video. If you have not done so already, I invite you to subscribe. I will be doing more videos soon on the scope. Thanks CLO
you know the button you push to change between thermal and night vision? I somehow switched it to thermal/digital and dont know how to change it back. can you tell me how to do it?
you should just have to hold that same button for 3 seconds. Let me know if that did the trick. PS. If you have not subscribed already, I invite you to please do so.
@PawPawWall. NO. You can run the night vision without the IR. The IR has 4 levels. OFF, Low Med and High. It also has a narrowing lens on it, so you can use the low level setting and turn the lens to narrow the beam. Thanks for stopping by and I invite you to subscribe to my channel if you have not done so already.
@@Craigs_Adventures I've emailed DNT, my unit does not show Bluetooth only wifi and i can't find any info on how to turn the IR light on. Thank you for your response.
I just received this from DNT about Bluetooth not showing up on the Setting menu. …. This is correct the new units and after you do a Firmware update Bluetooth is not longer used. Ballistics are transferred via wifi and ballistic calculation is unlocked in scope. By doing this you can send over 5 ballistic profiles instead of the one, also by using the inscope calculation instead of the table the inscope is more accurate and adds inclination which account for extreme angles.
I have an A to the left of the magnification x5 on the display can you tel me what it's for it's not profile as I changed that and it's still A gareth jones in the uk
@garethjones3412 This is what I recieved from DNT... " The letter in the main screen next to the magnification levels is the Ballistic Profile letter. The scope allows 5 A-E Ballistics Profiles. It will Stay on even if the Ballistics are turned off but will change if you change the Ballistics Profile letter." I cant get it display the letter at all.
@johndezzi4210 John, did that work. the 12345678 is the default password. Glad you stopped by and I invite you to subscribe if you have not done so already.
How do they connect to the Ballistics and do the new units not have Bluetooth? -This is correct the new units and after you do a Firmware update Bluetooth is not longer used. Ballistics are transferred via wifi and ballistic calculation is unlocked in scope. By doing this you can send over 5 ballistic profiles instead of the one, also by using the inscope calculation instead of the table the inscope is more accurate and adds inclination which account for extreme angles. I hope you have subscribed to my channel and help me gain the 1000 subs before end of year. Please do so if you have not done so already. Thanks CLO
@@Craigs_Adventures Model says TNC225R on the manual and on the scope. Serial number is 703390. Mine does not have the "wifi" button next to the USB-C port. It just has a block off plate. I assume it connects through wifi. When you go to the "connections" tab in the menu, only wifi is available. There is no Bluetooth selection. The manual does no good, because it shows the "wifi" button on the side and shows the "bluetooth" selection in the "connections" tab.
@@Craigs_Adventures, I have seen videos where there is a button on the side next to the USB port. Either way, the option isn't there. It is not in the connection tab either.
@phil-1115 look through the viewfinder. Do you see any Bluetooth or wifi icons . They should be there, might have a line through them. What software version is on the scope
@@HenriettaHeloise-m3v thanks for stopping by my channel and commenting. I don't fully understand the words Grant Cape. Is that were your from? Well anyway, I invite you to subscribe to my channel if you have not done so already
translated....(Priced at $1,100?) that price is USA cost. I do not know that it would be in your country. Thanks for stopping by and I invite you to subscribe if you have not done already....CLO
@HumeLeif I am not sure the Google translate did a good job translating this. it came out as "78997 Straight Ford" . Thanks for stopping by and commenting and as always I invite you to subscribe if you have done so already.
GReat to see you enjoying this fine lil toy ...quite amazing what is available today ...
I invite you to subscribe if you have not done so already.
Good tutorial video on that scope. It’s really nice to see both the screen and what buttons to hit. Thanks CLO
Excellent description and walk through. Well done sir!
@terryaylward8178 thanks for stopping by and commenting. I invite you to subscribe to my channel if you have not done so already.
Hi Craige, very useful video, thank you ! I have one of these optics but cannot get the Screen Shift to work and align at all, despite indexing to maximum both ways and ensuring long hold R/H button to save and exit menu. Any suggestions welcome - does yours actually work ? 🤔
I have sent your question the DNT. Stand by for thier response...I invite you to subscribe if you have not done so already.
Thanks for sharing, great tutorial. The Thermal Hotspot tracking feature will place the red dot on the hot heat sources that are in the viewfinder. The dot moves about highlighting the hot spots . All the best
Thanks for the feedback on the Thermal Hotspot Tracking. I did find out a few days later after the video was published. I invite you to subscriber to my channel if you have not done so already.
Exactly, it keeps the cross on top of the hottest point in the viewfinder (animal or animal part). Liked and subscribed
Awesome overview and details. Thank you. On to part 3. Mine is on its way. Be here in 2 days
thanks for the compliment. When you get it and if you have any questions ask me. And if you have not subscribed already, I invite you to please do so.
Ty for creating this. It's a great breakdown
Well thanks for stopping by. Its a great little scope that every time I use it, I am liking it more and more. If you have not done so already, I invite you to subscribe.
Done
Can you do another one on how to use the ballistics calculator? How to set your distance to get your hold over?
input the data for load in app
upload data from phone to scope via wifi
distance is set by your zero distance , usually 100 yard zero...
once its done , you aim at target and push laser button
ranging is done and gives a distance , new reticle (range solution ) appears
on reticle ....use that and take shot at target .
@@ShotintheDark-lk1ps Much appreciated
@@ShotintheDark-lk1ps Thanks for helping JustSaying. I invite you to subscribe if you have not done so already.
Thanks Shotinthedark for the user help. I invite you to subscribe if you have not done so already.
@@ShotintheDark-lk1ps Do you use your shooting reticle to point at the target when trying to get the range with the range finder or do you point the ranging reticle at the target? The reason i ask is because when pointing the shooting reticle at the target the range is correct, but when pointing the ranging reticle at the target the range finder is reading 120yds at 100yds.
Very good.demo
Thank you for this video. You were much more in-depth with the details than others I've seen!
I noticed that you have a Zulus, which I have also, and was wondering how you'd compare NV on them.
Its about the same. I have not put too much into the looking at the differences between the 2. Stay tuned for more videos coming up with the new scope. I invite you to subscribe if you have not already done so.
Just got mine!
Congratulations. Im sure you will enjoy it. If you have any questions, feel free to leave them here.
@4:40, just an FYI, that is military time. It was not 11:23. It was actually 11:11, since 2300 hours is 11 o' clock pm. These videos are fantastic, btw. Very helpful videos.
Hey thanks for stopping by and commenting. I did realize that was the time after I posted the video. Had a little laugh at myself when I saw it. PS. If you have not subscribed already, I invite you to please do so.
When going into connections, I only see Wi-Fi. Bluetooth does not pull up. Any ideas?
Can you connect the app and take a screen shot of the menus not showing the Bluetooth settings. What model scope do you have? send email to cloAdventures@oldani.org
Looks like a scope I can almost afford. A couple of weekends of OT I can get one.
Very good video just need to know how to turn the pip off as you have in the video.
@@stephenling4579 It’s the same way you turn it on. HOLD the picture-in-picture button for 3 seconds. Glad you stopped by and liked the video. If you have not done so already, I invite you to subscribe. I will be doing more videos soon on the scope. Thanks CLO
you know the button you push to change between thermal and night vision? I somehow switched it to thermal/digital and dont know how to change it back. can you tell me how to do it?
you should just have to hold that same button for 3 seconds. Let me know if that did the trick. PS. If you have not subscribed already, I invite you to please do so.
Question, does the IR light automatically come on when you switch over to night vision?
@PawPawWall. NO. You can run the night vision without the IR. The IR has 4 levels. OFF, Low Med and High. It also has a narrowing lens on it, so you can use the low level setting and turn the lens to narrow the beam. Thanks for stopping by and I invite you to subscribe to my channel if you have not done so already.
@@Craigs_Adventures I've emailed DNT, my unit does not show Bluetooth only wifi and i can't find any info on how to turn the IR light on. Thank you for your response.
I just received this from DNT about Bluetooth not showing up on the Setting menu. …. This is correct the new units and after you do a Firmware update Bluetooth is not longer used. Ballistics are transferred via wifi and ballistic calculation is unlocked in scope. By doing this you can send over 5 ballistic profiles instead of the one, also by using the inscope calculation instead of the table the inscope is more accurate and adds inclination which account for extreme angles.
I have an A to the left of the magnification x5 on the display can you tel me what it's for it's not profile as I changed that and it's still A gareth jones in the uk
@@garethjones3412 i have sent an email about your question
@garethjones3412 This is what I recieved from DNT... " The letter in the main screen next to the magnification levels is the Ballistic Profile letter. The scope allows 5 A-E Ballistics Profiles. It will Stay on even if the Ballistics are turned off but will change if you change the Ballistics Profile letter." I cant get it display the letter at all.
I’m getting a screen that says I need a password for the unit to connect it to the WiFi, any clue what that could be?
@@johndezzi4210 12345678
@johndezzi4210 John, did that work. the 12345678 is the default password. Glad you stopped by and I invite you to subscribe if you have not done so already.
@@Craigs_Adventures thank you, yes that worked
when i go to connections wifi is the only option for me to turn on
How do they connect to the Ballistics and do the new units not have Bluetooth?
-This is correct the new units and after you do a Firmware update Bluetooth is not longer used. Ballistics are transferred via wifi and ballistic calculation is unlocked in scope. By doing this you can send over 5 ballistic profiles instead of the one, also by using the inscope calculation instead of the table the inscope is more accurate and adds inclination which account for extreme angles. I hope you have subscribed to my channel and help me gain the 1000 subs before end of year. Please do so if you have not done so already. Thanks CLO
I just received mine and it doesn't have bluetooth. The newer version doesn't have a lot of the features that yours has.
what is the model. in the instructions, how to you put the specs of the ballistics calc. does it just use wifi?
@@Craigs_Adventures Model says TNC225R on the manual and on the scope. Serial number is 703390.
Mine does not have the "wifi" button next to the USB-C port. It just has a block off plate.
I assume it connects through wifi. When you go to the "connections" tab in the menu, only wifi is available. There is no Bluetooth selection.
The manual does no good, because it shows the "wifi" button on the side and shows the "bluetooth" selection in the "connections" tab.
@@phil-1115 you should not have any wifi buttons. the wifi and bluetooth options are under the Connections tab in the Settings menu
@@Craigs_Adventures, I have seen videos where there is a button on the side next to the USB port. Either way, the option isn't there. It is not in the connection tab either.
@phil-1115 look through the viewfinder. Do you see any Bluetooth or wifi icons . They should be there, might have a line through them. What software version is on the scope
Grant Cape
@@HenriettaHeloise-m3v thanks for stopping by my channel and commenting. I don't fully understand the words Grant Cape. Is that were your from? Well anyway, I invite you to subscribe to my channel if you have not done so already
售价1100美元？
translated....(Priced at $1,100?) that price is USA cost. I do not know that it would be in your country. Thanks for stopping by and I invite you to subscribe if you have not done already....CLO
@@Craigs_Adventures 我是中国的，这个在中国售价1500美元。
Good luck on ordering one. We paid for one approximately a month ago still waiting
have you recieved it yet? I have heard that they are back in stock. Let me know. PS. If you have not subscribed already, I invite you to please do so.
78997 Reta Ford
@HumeLeif I am not sure the Google translate did a good job translating this. it came out as "78997 Straight Ford" . Thanks for stopping by and commenting and as always I invite you to subscribe if you have done so already.