3D boxes to your dimensions v 2 0
Вставка
- Опубліковано 15 вер 2024
- Project pages:
box.perinski.eu/
makerworld.com...
go.like-it.lin...
I’ve updated the box model to simplify the ordering process significantly. You no longer need to specify the offsets for the reinforcing ribs-they are generated automatically based on the width and length of the box. This change was made due to frequent errors arising from misunderstanding the parameters. The reinforcing ribs are now evenly distributed around the box’s perimeter.
I also added two locks instead of one. If the box length exceeds 100 mm, the model automatically adds a second lock for secure lid retention. Both the locks and reinforcing rib offsets are generated automatically.
Parts links below:
* Bicycle Spokes - go.like-it.lin...
* Stainless Steel Cylindrical Pins D2 mm - go.like-it.lin...
* Cylindrical Pin - go.like-it.lin...
* Sealing foam rubber - go.like-it.lin...
* Sealing silicone - go.like-it.lin...
* Foam Rubber - go.like-it.lin...
* UV Glue - go.like-it.lin...
* Glue 242 - go.like-it.lin...
* Super Glue 502 - go.like-it.lin...
* Universal Glue Quick-drying - go.like-it.lin...
* eSUN eABS+HS - go.like-it.lin...
* eSUN Upgraded ePLA-Matte - go.like-it.lin...
Links to used tools:
* Angle grinder - go.like-it.lin...
* NOGA deburring tool and Blades - go.like-it.lin...
* Carbide Machine Reamer - go.like-it.lin...
* UV Glue Repair Lamp - go.like-it.lin...
* Niimbot D110 Label Maker Printer - go.like-it.lin...
* Niimbot Color Label - go.like-it.lin...
Thank you for every tip or donation,
it means great recognition for me and helps a lot to keep going!
Donate now: ko-fi.com/peri...
www.paypal.me/...
BTC: bc1qplpzq36ghw84hty4nn2zzu4ps4sdh4th0v93j8
ETH: 0xc766ebbeAa76aaf629788c8F99C33A8d80d48977
Mr. Perinksi, once again you provide a complete well thought out designed and implemented product. Your work speaks for itself. Thank you.
Suggestions V3:
1- The holes should be 1-sided so you can insert one side and glue 1 side
2- Label on the side and top to visually see the content
3- Stackable + Self Aligning so that they dont fall or slide - and fit side-by-side
4- Carry Handle - Option - to hooks up in the same manner with a pin
5- Carry strap - Option - to Print
Great box solution! Making them stackable so they don't slide would be really great.
ua-cam.com/video/PZsO1fnPJ3Q/v-deo.html
Very nice design!
I love the tiny T square tool! Never seen one of those.
Your works always are incredible !!.
Valera, as usual, everything is super!
Very nice bro
nice boxes, you should make them stackable.
ua-cam.com/video/PZsO1fnPJ3Q/v-deo.html
Very nice boxes ! could you add some more lock to lock one box on top of another one ? and add some groove so that the top box is constrained to the bottom box ? would be an awesome addition IMHO.
ua-cam.com/video/PZsO1fnPJ3Q/v-deo.html
вопрос, а есть какой-нибудь лайфхак как обращаться с цианокрилатным клеем? Как я не пытался выпендриваться с баночками, и носик из иголки делал, и оставлял шпильку в носике, всё равно носик застывает и потом пробить этот клей прям проблема. Клей использую космофен в фасовке с обычным длинным носиком.
У меня нет решения.
superBox 👍
I have a suggestion.
Maybe have an option to print a lid that lets you install a thin clear acrylic sheet?
It's entirely possible.
What filament material to use? Does PLA work or is it to brittle?
For the box PLA, ABS. Locks are best printed from ABS, it is soft and malleable for a soft latch.
@@V.Perinski Would PETG work okay for this project?
@@bitsurfer0101 A lot of people print it and they like it. I prefer ABS and PLA
печатал (и чертил) разные варианты под клипсу, даже если она работает по резьбе винта м3 выработка самой клипсы минимальная (пла/петг) по этой причине как мне кажется практичнее использовать все же винты м3 40мм чем шпильки. ну и работать с винтами проще чем со шпильками
Nice job! thanks!