I haven`t been able to buy a good piece of usable BMF in years, so I gave your method a shot. I did the Revell 1-25 scale 59` Cadillac Eldorado coupe with the aluminum foil and it came excellent. I`ll probably go this way for a while. Thanks for the tip!
Yep this is the way we did it back in the 70's on up. Lotta folks would use silver paint which was fine but Aluminum foil was the pro choice for decades till the Molotow, Alclad and Bare metal foil days. Bare metal is easier to work with and the results are on par with Aluminum foil easily if not better in some opinions. Good video how to!
A tip, go to a construction store and ask for aluminum to join heating pipes, and aluminum in a roll already with glue, and as thin as this kitchen aluminum sheet, but it comes with glue, it is very strong, you can glue it to the piece then cut off the excess, you can also polish it before gluing it and when it's shiny, apply it....
Believe it or not I just happened to be setting not 2 feet from a roll of the tape your referring to and a die cast model car was another 3 feet away. So after a quick experiment im in agreement. To thick for most applications. However I'm sure there are some instances where it could prove useful. To bad it's damn $30. A roll around here
I think HVAC tape is a little to thick, I tried it before and it looks out of scale. I’m not sure if they make different thickness but the stuff I have is about 3 pieces of aluminum foil thick. But I agree I think this aluminum foil is about right. Thanks for the support 👍
I have used BMF, foil and alum. duct tape. I find when BMF has any wrinkle, it will tear as you take it off the sheet, when it works it's nice but it's so thin, it's easy to rip. Foil works great for trim and airplanes, perfect for airplanes because it was once an airplane. Duct tape or hvac tape, just different name, it nice but very thick, good for large scale models or maybe r/c that will get beat on. It's a lot more durable.
Yeah that’s a common problem. The bare metal foil decays in a Hurry. I would think by now they would find a solution to make it last longer. But the aluminum foil never lets you down lol.
Never used any foil on any of my models. Always seemed to be beyond my skill level. Doesn't mean I'm not going to try it. If it looks like poo... I can try it again. Thanks for the tip.
No I haven’t tried that. But I’ve thought about trying it before I just don’t think they make a foam sheet thin enough. I think it would look to out of scale
@@CustomScaleModels have you tried mailbox r us or postal services for it? They sometimes carry it or go to a parts store and look for a thin foam filter
I tried it and it didn't work. I need a better glue. any ideas? I'd appreciate it. What is the adhesive on tape? Like masking tape? Another word I'd like to find a way to apply it to the flat side of the aluminum foil and then put a smooth paper over it so it's like a piece of Bare Metal Foil. Any ideas on that?
Great job and tutorial bro'... I haven't tried aluminum foil yet... For one of my upcoming builds (AMT 57 Chrysler 300c) I'll be trying HVAC tape... This is a first time for me, wish me luck because I probably will be needing it lol...
Keep the hobby going. I know the price has went way up since I was a kid 40 year's ago so we want to do the best job we can on putting them together. It's a pricey mistakes to do a redue.
It’s cool inexpensive way to do the trim, but I’d be worried after all the work I put into paint especially if it’s a custom paint job getting glue on the clear! I’m assuming you paint the car first? Well anyway cool idea.
As long as you use elmers glue, getting the glue on the clear coat will not hurt it as long as the clear coat is dry. The glue will wipe off with water.
My weak area (one of them) is masking and painting. The paint bleeds into the masked area. Can you use this technique after painting the model or on an older model that you already painted before you learned this technique? Will it score the paint? Or will the paint keep it from sticking? I was thinking about maybe using it after the color coat and before the clear coat.
Yes, it’s highly recommend to do this after you have painted the model and as long as you don’t put down to hard with the blade it will not score the body. Then clear coat
I haven't tried this yet, but I am forced to give it a try seeing the regular bare metal foil has left adhesive residue on the body of my Revell 66 Impala.I worked so hard to take my next step in building a better car model and now this. I tried using rubbing alcohol and cotton to remove the marks around my windows and the results were unsatisfactory. Until I try your way,is there anything that will safely remove bare metal adhesive from testors enamel paint ?
I hate when you try so hard to build a great model then something goes wrong that’s my luck as well. But in your case you can use GOO GONE and it will remove the residue from the bare metal foil and won’t hurt the paint!
Hmm, I think it is better for making chrome exhaust instead of using Molotov liquid markers ( ain't cheap) I'll try this method on my Custom Harley Davidson WLA 1:9 Italeri. Big thanks!!!
It’s been stuck on there for 210 days and it still looks the same as it did in this video and it’s still holding strong. I wouldn’t try to glue 2 pieces of plastic together with white glue but for stuff like this it’ works fine. Some people use white glue to glue there clear parts in on there models and some has been holding for over 20 years .
Elmers white glue will stick to aluminum foil. Most people that make embossed aluminum foil art use Elmers or a different brand white glue. It’s not very good at sticking aluminum to aluminum but it work’s sticking aluminum to plastic. It’s been 3 years and this aluminum foil is still stuck to the model.
I have used aluminum foil and my problem is getting it to stay. After learning how to use Bare metal foil, I find it easy to use. Over time, aluminum foil can fade.
I few years back I bought for a mere few dollars the original Monogram 1/8 scale Jaguar E-Type kit. This is the first generation of the kit from the early 1960s which had incredible detail for the time, wind up windows for example amongst suspension, steering etc. and a pretty good level of detail - it makes a pretty impressive model. The kit is complete and in its original box. I hope to use your technique of the 'chrome scale' on this kit.
Obviously you can use household foil for fine detailing like that but you can’t beat Flite metal/ bare metal foils for large surface covering - you would not get the same results on any flat area covering
Kitchen foil and glue like you're using here is the way to go. The expense of real BMF just isn't worth it. BMF is about A4 size, costs nearly ten bucks and doesn't stick properly anyway, whereas kitchen foil you get like 8 metres of the stuff for a couple quid and know it's going to stick with your glue of choice.
@@CustomScaleModels Yes, Molotow is ok, but you need a very steady hand! It's great for touch ups and some trim but it tends to turn grey after a while.
Wow! By the time you buy all that stuff not knowing the frustrations and out come, for a few bucks more you can buy Bare Metal Foil…. And have better results!😂
I like this because I don't want to have hundreds of special things around. Very cost effective too. Thanks for sharing.
I haven`t been able to buy a good piece of usable BMF in years, so I gave your method a shot. I did the Revell 1-25 scale 59` Cadillac Eldorado coupe with the aluminum foil and it came excellent. I`ll probably go this way for a while. Thanks for the tip!
Yep this is the way we did it back in the 70's on up. Lotta folks would use silver paint which was fine but Aluminum foil was the pro choice for decades till the Molotow, Alclad and Bare metal foil days. Bare metal is easier to work with and the results are on par with Aluminum foil easily if not better in some opinions. Good video how to!
It is hard to beat bare metal foil but they all have there place. I really like the Molotow chrome pens. It’s so much easier!
Excellent idea. Thanks buddy keep doing this great hobby. I love ❤️ people who are addicted to this stuff. God bless you. 😊
I used to use xmas tinsel back in the '70s
Thanks mate. I can understand you.......And remember you keep building them and I will keep watching them.👍.
A tip, go to a construction store and ask for aluminum to join heating pipes, and aluminum in a roll already with glue, and as thin as this kitchen aluminum sheet, but it comes with glue, it is very strong, you can glue it to the piece then cut off the excess, you can also polish it before gluing it and when it's shiny, apply it....
Do you mean foil tape. That stuff is way too think and the glue on that tape destroys any painted finish.
Believe it or not I just happened to be setting not 2 feet from a roll of the tape your referring to and a die cast model car was another 3 feet away. So after a quick experiment im in agreement. To thick for most applications. However I'm sure there are some instances where it could prove useful. To bad it's damn $30. A roll around here
I was wondering about how to do this but I think I got it now. Good video. thanks for the instructions and tips.
Thanks for watching I’m glad I could help 👍
Awesome job! Nice to know there are alternatives to bare metal foil out there.
And way cheaper
One suggestion,use a Black marker on Yr blade as a contrast to the foil 👍👍😎
That's a good idea. I've thought about using HVAC tape too, but this seems like a better alternative. Thanks for the tip!
I think HVAC tape is a little to thick, I tried it before and it looks out of scale. I’m not sure if they make different thickness but the stuff I have is about 3 pieces of aluminum foil thick. But I agree I think this aluminum foil is about right. Thanks for the support 👍
Good to use at biger models
I have used BMF, foil and alum. duct tape. I find when BMF has any wrinkle, it will tear as you take it off the sheet, when it works it's nice but it's so thin, it's easy to rip. Foil works great for trim and airplanes, perfect for airplanes because it was once an airplane. Duct tape or hvac tape, just different name, it nice but very thick, good for large scale models or maybe r/c that will get beat on. It's a lot more durable.
I ordered the bare metal foil pack and I think it was old and did not stick all all. Thanks Amazon, I will be doing this technique great video🤘
Yeah that’s a common problem. The bare metal foil decays in a Hurry. I would think by now they would find a solution to make it last longer. But the aluminum foil never lets you down lol.
Thanks for the great information I definitely will try this technique
It works great, looks great and cheap!
A great alternative tip. Thanks for sharing this money saving tip.
Rick
Looks pretty good actually.. I use the pens also , but this would definitely work out nicely.. 👍
I’ve used bear metal foil for years. The results are OK. I’m working on a 1/16 scale, Corvette stingray. I think I’ll give this a try. Thanks.
I use Dollar Store Sandwich wrap foil its thinner. Testors spray adhesive spray bottle with dish soap and water
Great lesson. Thanks for the tip.
Thanks for the support 👍
What's this Elmers glue you use? I can't get the same brand here in Europe, so what would I look for? Especially since it would go over paint
Great idea. Good alternative with excellent results. Thanks for the video.
Great tutorial!!! Thanks for sharing.
Thanks for watching 👍
Never used any foil on any of my models. Always seemed to be beyond my skill level. Doesn't mean I'm not going to try it. If it looks like poo... I can try it again. Thanks for the tip.
Thanks for this video! If you were to put another piece on how would you cover the overlap?
You have to make it one piece
I’m truly impressed. Good to know
Brilliant many thanks for sharing 👍👍👍👍
No problem! Thanks for watching 👍
I think it is a great trick and with your permission I copy it to use it in my models thanks for sharing!!! a greeting!!
Yes, you can do that
You can also use the foil from gum wrappers like juicyfruit gum, if you have the time to do so...
I’ve never thought about that before
Have you also tried doing the plastic seats in foam and different color materials ???
Or even the headliner and adding lights to the interior the same as the real cars???
No I haven’t tried that. But I’ve thought about trying it before I just don’t think they make a foam sheet thin enough. I think it would look to out of scale
@@CustomScaleModels have you tried mailbox r us or postal services for it? They sometimes carry it or go to a parts store and look for a thin foam filter
I tried it and it didn't work. I need a better glue. any ideas? I'd appreciate it. What is the adhesive on tape? Like masking tape?
Another word I'd like to find a way to apply it to the flat side of the aluminum foil and then put a smooth paper over it so it's like a piece of Bare Metal Foil. Any ideas on that?
I've heard about that technique thanks for the demonstration definitely gonna try it
Good idea, never considered aluminum foil for “Crome” trim. With a little careful buffing, that would look as good as “Crome”.
Would work good using the dull side for interior floor pans and inner door panels to give it that aluminum look.
Yes it would. The aluminum foil paper in cigarette packs works really well for floor pans
Another Useful Video!! 👍👍🤗
Glad it was helpful!
Great job and tutorial bro'... I haven't tried aluminum foil yet... For one of my upcoming builds (AMT 57 Chrysler 300c) I'll be trying HVAC tape... This is a first time for me, wish me luck because I probably will be needing it lol...
Thanks! Just take your time and don’t get aggravated because that’s when stuff turns for the worst lol. But good luck 👍🍀
Looks great! Awesome tip, thanks for sharing. I just subbed to you, looking forward to watching more videos. have a great day.
Thanh you 👍 I look forward to having you as a viewer.
Great Tutorial! I love the special guest of the Ant lol
Thanks!!
It’s always good practice to keep your enemies close around (ants) haha
Keep the hobby going. I know the price has went way up since I was a kid 40 year's ago so we want to do the best job we can on putting them together. It's a pricey mistakes to do a redue.
Do you tin before or after you paint. One guy does before. Then dry brushes laquer thinner over the chrome parts to remove paint.
Tin foil after the paint and clear (if using) it’s much simpler and cleaner doing it after.
I like to use silver leaf. The Chinese stuff is really cheap for a book. Thanks for the video!
Never thought about using that. Is it better than aluminum foil?
Always very shiny. It's very thin and overlapping doesn't show at all.
does the access glue come of the body with foil you cut off?
Been wanting to do a better way to create chrome trim. Thank you,
When I saw the finish product, went looking for the subscribe button.
Thanks for the support 👍 I really appreciate it!
Thanks for tip bro 👍🏻👏🏻
No problem!
Great work, Thanks for the tip.
Thanks! Also Thanks for watching 👍
Does Clear Elmer's glue work with decals made from paper?? And how long does Clear Elmer's glue last on a plastic model??
I’m not sure about the decals. But the glue has held the aluminum for 5 years as of now and still looks good.
@CustomScaleModels thank you.
Does this also work if i use the usual scale modelling glue, like from tamiya? Or does it need a specific glue?
It will not work with model glue. Most model glues melt the styrene together but won’t stick to aluminum. You need an all purpose glue.
@@CustomScaleModels Thanks for the advice!
thats freaking awesome great job thanks for sharing
Glad you liked it! Thanks for watching 👍
Great idea, and should save lots of $$
Very nice build 👍
Yeah Mon I get it, thanks very much for sharing 👍🏽
that is very nice. i will definately do this
I’m glad I could help! It’s really easy as well’
What sort of water do you find is the best ?
Any distilled water is good
Bare Metal isn't very good. I find it super hard to work with and doesnt always stick waste of money in my book
Thank you for sharing!
Thanks for watching
Nice tip brother!🍻👍🇨🇱
It’s cool inexpensive way to do the trim, but I’d be worried after all the work I put into paint especially if it’s a custom paint job getting glue on the clear! I’m assuming you paint the car first? Well anyway cool idea.
As long as you use elmers glue, getting the glue on the clear coat will not hurt it as long as the clear coat is dry. The glue will wipe off with water.
How do you paint it with tjhat stuff on there?
This was just a demo on how to do it. You would do this after you paint then clear coat over it
Great tip. Thanks for that
My weak area (one of them) is masking and painting. The paint bleeds into the masked area. Can you use this technique after painting the model or on an older model that you already painted before you learned this technique? Will it score the paint? Or will the paint keep it from sticking? I was thinking about maybe using it after the color coat and before the clear coat.
Yes, it’s highly recommend to do this after you have painted the model and as long as you don’t put down to hard with the blade it will not score the body. Then clear coat
I haven't tried this yet, but I am forced to give it a try seeing the regular bare metal foil has left adhesive residue on the body of my Revell 66 Impala.I worked so hard to take my next step in building a better car model and now this. I tried using rubbing alcohol and cotton to remove the marks around my windows and the results were unsatisfactory. Until I try your way,is there anything that will safely remove bare metal adhesive from testors enamel paint ?
I hate when you try so hard to build a great model then something goes wrong that’s my luck as well. But in your case you can use GOO GONE and it will remove the residue from the bare metal foil and won’t hurt the paint!
@@CustomScaleModels So this will take the adhesive off without damage the paint surface ? I will buy this tomorrow for sure. Thanks for the info.
Yes it will remove it without hurting paint.
@@CustomScaleModels thanks I appreciate the quick response cause that was quick lol
Thanks for the tip
No problem 👍🏼
Good how to bro great hack for the chrome trim👍keith subbed u a while back bud
Thanks! It’s definitely good to have as many options as possible. I subbed to you a while back as well. Keep up the good work! 👍
Thats what am doing now none the hobby shops around me have no bare metal foil at this moment
Can you do that AFTER the model is painted?
Don't do it before you paint it ,its not like you can tape it off lol
very cool sir looks very good
Thanks 👍 I appreciate it
Hmm, I think it is better for making chrome exhaust instead of using Molotov liquid markers ( ain't cheap) I'll try this method on my Custom Harley Davidson WLA 1:9 Italeri. Big thanks!!!
I didn’t think white glue would stick for very long? It’s made for porous surfaces like paper and wood?
It’s been stuck on there for 210 days and it still looks the same as it did in this video and it’s still holding strong. I wouldn’t try to glue 2 pieces of plastic together with white glue but for stuff like this it’ works fine. Some people use white glue to glue there clear parts in on there models and some has been holding for over 20 years .
dude Elmer's clear glue doesn't stick to metal I know I tried it and it doesn't stick it says on the bottle somewhere it won't stick to metal
Elmers white glue will stick to aluminum foil. Most people that make embossed aluminum foil art use Elmers or a different brand white glue. It’s not very good at sticking aluminum to aluminum but it work’s sticking aluminum to plastic. It’s been 3 years and this aluminum foil is still stuck to the model.
Does it overlap like BMF?
Yes
Top Job
Hmmmm....I need to try to polish the foil before application. After smoothing it out on glass.....
Why are you trying to polish it?
I use a fine brush.
Outstanding
I would use the same method when masking canopies.
super . gracias por el video
Great tip
I have used aluminum foil and my problem is getting it to stay. After learning how to use Bare metal foil, I find it easy to use. Over time, aluminum foil can fade.
Does bare metal foil not fade? I have not much experience with it.
Brilliant
Thank you.
No problem. I’m glad I could help out
Thanks mate
To prevent tearing of the foil I take a rounded blade knife.
Nice !
nice!
THANKS!
Your welcome
I few years back I bought for a mere few dollars the original Monogram 1/8 scale Jaguar E-Type kit. This is the first generation of the kit from the early 1960s which had incredible detail for the time, wind up windows for example amongst suspension, steering etc. and a pretty good level of detail - it makes a pretty impressive model.
The kit is complete and in its original box. I hope to use your technique of the 'chrome scale' on this kit.
Sounds like a awesome model kit! I have never heard that model before. Just take your time and it’ll turn out great.
kool
👍
Each time I tried to use kitchen aluminium foil I failed miserably.
Certain brands are better than others.
Niceeee!
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
👍
👍
Obviously you can use household foil for fine detailing like that but you can’t beat Flite metal/ bare metal foils for large surface covering - you would not get the same results on any flat area covering
Wow .. !!
Brian Nab, anybody ever hear of him?
No I haven’t, who is he?
@@CustomScaleModels He is the model king from Colorado Model Magazine did a big piece on his models a few years back
I’ll have to check it out. I haven’t looked at a magazine in a long time.
Kitchen foil and glue like you're using here is the way to go. The expense of real BMF just isn't worth it. BMF is about A4 size, costs nearly ten bucks and doesn't stick properly anyway, whereas kitchen foil you get like 8 metres of the stuff for a couple quid and know it's going to stick with your glue of choice.
I agree. I’ve really been liking molotow chrome pens and is cheaper in the long run than BMF
@@CustomScaleModels Yes, Molotow is ok, but you need a very steady hand! It's great for touch ups and some trim but it tends to turn grey after a while.
i use molotow liquid crome , its eaasy
I’m not that big of a fan of the molotow for
Trim work I do use it for going over chrome pieces that got scratched or I had to sand
Dollar tree foil is the one its so thin it melts on a bbq pit
That exactly what I use. It’s really only good for models because it’s no good for grilling or if you try to wrap leftovers up it rips lol
I am finished with the brand "Bare Metal Foil". Its a HUGE disappointment using this over priced material that sucks most of the time
Wow! By the time you buy all that stuff not knowing the frustrations and out come, for a few bucks more you can buy Bare Metal Foil…. And have better results!😂
Have you used bare metal recently? It’s horrible. Owner said they was coming out with a v2 version but currently it’s garbage
He is uh
What?
C'mon, $8.00 a sheet, bite the bullet and purchase the real thing. It goes a long way.
Great video God bless!
Thanks! God bless you as well