Found the same thing with a kids AR15 from Wish - 400mm was the sweet spot. So it went from a crap 9cm plastic barrel manual blaster barely making 12m to an accurate blaster with a tighter longer barrel and a bit stiffer spring to 25m accurate. Which now resembles a Sniper Blaster with the barrel flat matte black. Has a 20mm rail on top so wacked a Holographic on it....MUCH fun lol
What upgraded size piece would you recommend to replace the stock fish bone on the m4a1 for the 35cm barrel? Gotta have something to cover the inner barrel so it doesn’t stick out right?
Whilst it seems that tightbore barrel DOES increase FPS, you're going to have to show us some hop-up action. Because from the looks of it, there's no real benefit. UNLESS, we were using solid ammo, not gel. I really appreciate the fact you did go out of your way and bought one of these barrels to show us! Looking Forward to the hop-up test.
I appreciate that it is hard to visually see from this video, but I am still not sure how you have managed to draw that conclusion. I will however put a hopup on and re-test
@@lowguidoschopshop Oh it just looks like the spread seemed sporadic regardless. I did notice the first barrel, the balls were breaking a lot easier though.
@@thenoodlehunter6828 did you watch part one? Looks like a lot better grouping when the fps was increased compared to the first video using a standard gearbox. I thought it was pretty impressive grouping considering he's firing gels without a hop up.
@@Venomous734 Just finished watching it. Part one did the barrel more justice. I really now want to see if Hop-Up would make it shoot more laser shots.
Yo @Low Guido's Chop Shop - Do you have a 'Guido's mathamagician' formula for working out usable cylinder volume? I'm assuming pi x Rsq. x L will only give you Total Cylinder volume if you know its dimensions but some of that isn't used due to piston/ladder/plunger real estate inside the cylinder. Is it too nerdy to want that much accuracy/detail? Just like when they sell 100%, 80%, 60% cylinders -- 100%, 80%, 60% of??? What's the actual usable volume?? Just Q's I have.... Thanks for any info if you care to share.. Cheers.
So everyone is talking about FPS from muzzle but has anyone checked what it is from as little as 10m away from muzzle or 20m to see the FPS drop compared to a smaller mw gel ball that weighs a bit less moving at 360fps compared to larger 8 mm ball moving 360fps cause you want the one that has the punch down range! My gen 9 shoots 270-280fps from muzzle but with a chrony about 16m away it’s hitting at 130- 140 FPS big loss but what do the smaller lighter balls moving quicker do ??
so if a ball exits as the same velocity gravity is the exact same however you may get a little less air resistance so technically it might cut through the air but if its too light the air resistance will have more of an impact on the gell ball so it will most likely equal out my dude
Guido sorry for spamming what would happen if you put a blue fighting bros barrel on with a id of 7.0mm I litteraly did a review for 7 mins on it today on agbe
Most hopups available on the market are designed for 300 fps according to a few of the websites that sell them. Perhaps he could get something meant for an airsoft gun.
@@uss717hamptonify not the buffer tube just the stock. It has a bit of play but it works alright. I found some nice aftermarket stocks for the Gen8 and it worked nicely. The Gen8 and wells buffer tubes wont fit a J9 without appropriate adaptors/modifications though.
I've ordered most of the parts to build a gel a ball sniper from novritsch.com/ and what im doing is fabricating some of my own parts and modifying some of Novristch's parts to accept the gel balls (basically im making an op bolt action gel rifle)
@@lowguidoschopshop well it will be if i do it right and if i get a cnc machine and an injection molding machine, i might be able to produce the part needed for the rifle to accept the gel balls
33cm barrel for my nwell M4 is $53 for steel and $28 for gold series, plus $11.30 postage since the gold series is cheaper and 7.1 mm instead of 7.2 i am going for gold. i am waiting on parts to do a full gearbox rebuild on it any way.
@@1969cmp too true its an odd thing ive watched a few of these vids and is a tad strange to hear toys being spoken about with lingo you hear in the armoury or civillian gunsmith sometimes its easy to think they forget these toys are...well..toys😆
Please do a video exactly like this but with hop ups to see accuracy improvements?
Omaji Gaming I won’t work with this power
Awesome video man. So refreshing to see good quick editing and no bullshitting 👍👍👍 keep it up
please put a hop up on one of these bad boys
It will break the gels
Bud, you are without a doubt the best gel blaster channel going. Much subscribe
Found the same thing with a kids AR15 from Wish - 400mm was the sweet spot. So it went from a crap 9cm plastic barrel manual blaster barely making 12m to an accurate blaster with a tighter longer barrel and a bit stiffer spring to 25m accurate. Which now resembles a Sniper Blaster with the barrel flat matte black. Has a 20mm rail on top so wacked a Holographic on it....MUCH fun lol
I'm sold, after Xmas present me thinks, already blown the budget for this year.
i feel you on that lol
Guido ... Range test is where your mos fet would have come in handy to reduce the mental fire rate ...
true.
u are 110% correct man . I did think about dat as soon as he started to shoot ou full auto
What upgraded size piece would you recommend to replace the stock fish bone on the m4a1 for the 35cm barrel? Gotta have something to cover the inner barrel so it doesn’t stick out right?
Whilst it seems that tightbore barrel DOES increase FPS, you're going to have to show us some hop-up action. Because from the looks of it, there's no real benefit. UNLESS, we were using solid ammo, not gel.
I really appreciate the fact you did go out of your way and bought one of these barrels to show us! Looking Forward to the hop-up test.
I appreciate that it is hard to visually see from this video, but I am still not sure how you have managed to draw that conclusion. I will however put a hopup on and re-test
@@lowguidoschopshop Oh it just looks like the spread seemed sporadic regardless. I did notice the first barrel, the balls were breaking a lot easier though.
@@thenoodlehunter6828 did you watch part one? Looks like a lot better grouping when the fps was increased compared to the first video using a standard gearbox.
I thought it was pretty impressive grouping considering he's firing gels without a hop up.
@@Venomous734 I shall watch it now.
@@Venomous734 Just finished watching it. Part one did the barrel more justice. I really now want to see if Hop-Up would make it shoot more laser shots.
What was your range distance? Did you hot glue the barrels to the t-piece?
Can you do one on the gold series please??!!??
Bought three barrels from bruisemaster. They did not send them. I tried contacting them but I get no response. What has happened to these guys?
Yo @Low Guido's Chop Shop - Do you have a 'Guido's mathamagician' formula for working out usable cylinder volume?
I'm assuming pi x Rsq. x L will only give you Total Cylinder volume if you know its dimensions but some of that isn't used due to piston/ladder/plunger real estate inside the cylinder. Is it too nerdy to want that much accuracy/detail?
Just like when they sell 100%, 80%, 60% cylinders -- 100%, 80%, 60% of??? What's the actual usable volume??
Just Q's I have.... Thanks for any info if you care to share..
Cheers.
So everyone is talking about FPS from muzzle but has anyone checked what it is from as little as 10m away from muzzle or 20m to see the FPS drop compared to a smaller mw gel ball that weighs a bit less moving at 360fps compared to larger 8 mm ball moving 360fps cause you want the one that has the punch down range!
My gen 9 shoots 270-280fps from muzzle but with a chrony about 16m away it’s hitting at 130- 140 FPS big loss but what do the smaller lighter balls moving quicker do ??
so if a ball exits as the same velocity gravity is the exact same however you may get a little less air resistance so technically it might cut through the air but if its too light the air resistance will have more of an impact on the gell ball so it will most likely equal out my dude
Great video mate, you are killing it with your content!!!!
Hey mate
How much was the 40cm barrel & where did you buy them from?
and would one if these fit my
JM-ACR-J10?
Sweet new vid so soon i was expecting to wait for a few days.
What gels did you use?
awesome mate! like your videos
Please please man can you do a video of the gen 8 m4a1 metal outer barrel and fishbone upgrade how to please please please
ok I will.
im buying a 35cm alloy barrel for my m4a1 gen8 so wat length outter barrel will i need? cheers
Do you know much about the mk-p300 if so please do a video on it and what upgrades are available for it?
Do put a hopup on please and what price r they mate
How much FPS do I reckon I could get with a 35 barrel and a hope
On my gen 8 m4a1?
Guido bro what gears you using in the first blaster you crono
Are those NOS bottles I see in the background : )
Guido sorry for spamming what would happen if you put a blue fighting bros barrel on with a id of 7.0mm I litteraly did a review for 7 mins on it today on agbe
what would happen? good question.
So this is full original m4a1 ? No change motor or anything? And it from original 220fps to 300fps ?
no. watch (part 1) for original
What modifications did you done at this blaster ?
Wondering if anyone knows the barrel length of a punisher v2???
Were you using same T piece with each barrel?
Yes
just ordered one! cheers lad
Which length would I need for my Wells M401 LG?
barrel length on a well m4 is 32.6cm, whats 4mm among friends so i am ordering a 33 cm barrel for mine.
What's the specs in your Gearbox?
Too bad the barrel’s no longer available
Really? Since when? I have about 5 here.
Not sure. Just found out today. I clicked on your link.
Someone must be on holidays ... Lol
MP7 .... Just got one cheap ... What did you do to yours .
Oh ... Vid is sweet
I dunno about you guys but that 35cm barrel was shooting dead straight
Nice video, as per @omaji Gaming comment, can you please do a video with a hopup
add a dam hop up and bench mark this girl ;)
byobbbyo the hop up will break the gels
Most hopups available on the market are designed for 300 fps according to a few of the websites that sell them. Perhaps he could get something meant for an airsoft gun.
FFS i paused at the wrong bit then restarted at 7:40 lol
Just a quick question. Does anybody know if a Gen8 stock will fit a Gen9?
No, a gen 8 stock wont fit
@@Venomous734 we will soon see haha. The Wells fit the gen 9 nicely.thanks for responding btw
@@alfaholic3 So the Well M4 buffer fits onto the Gen9? Does it work the other way too? Trying to find out if the Gen9 buffer fits the Well M4
@@uss717hamptonify not the buffer tube just the stock. It has a bit of play but it works alright. I found some nice aftermarket stocks for the Gen8 and it worked nicely. The Gen8 and wells buffer tubes wont fit a J9 without appropriate adaptors/modifications though.
I've ordered most of the parts to build a gel a ball sniper from novritsch.com/ and what im doing is fabricating some of my own parts and modifying some of Novristch's parts to accept the gel balls
(basically im making an op bolt action gel rifle)
This sounds very interesting
@@lowguidoschopshop well it will be if i do it right and if i get a cnc machine and an injection molding machine, i might be able to produce the part needed for the rifle to accept the gel balls
Range, seriously? You'd have more luck throwing a handful of balls... what's the point of 360 fps with no accuracy... garbage.
changing the barrel gives higher fps 😂
About 20-30 dollars ... Depending on length and type of barrel .... Plus postage
33cm barrel for my nwell M4 is $53 for steel and $28 for gold series, plus $11.30 postage
since the gold series is cheaper and 7.1 mm instead of 7.2 i am going for gold.
i am waiting on parts to do a full gearbox rebuild on it any way.
Bunnings $3.20 ;)
......and then...360fps
got my 27cm gold coming wed, now $66.30 later l have to wait till monday for my new toy a 35cm S/S XP, ( my bank account hates you Low Guido )
340fps 😆
cmom man sure its no 22-250 but just a kids toy which compared to nerf guns these would be more fun for the kids.
@@twistedmr ....and big kids 😆
@@1969cmp too true its an odd thing ive watched a few of these vids and is a tad strange to hear toys being spoken about with lingo you hear in the armoury or civillian gunsmith sometimes its easy to think they forget these toys are...well..toys😆