VMC gs56 build
Вставка
- Опубліковано 5 вер 2024
- PARTS LIST:
VMC gs56 (125cc) cilinder
VMC kifly exhaust
VMC 28-30 reed valve
28mm pwk imitation
FRT quickaction adapter
RMS 51mm crankshaft
Corteco blue oil seal
SKF C3 bearings
3.00 primary gearing
Malossi team clutch plates
Crimaz multispring
RMS cruciform
MD racing shift arm
MD racing silentblock rear suspension
HP4 ignition 1.0 kg
Che rapporti hai montato?😊
Nice job!!!.I am preparing and gs58 in my pk 125 xl.the problem i have is the small space to touch the gasket with the crankcase .Whats is the green paste that you put?
You need to cut the crankcase the same height as the cilinder base gasket. The green putty is weicon 2 component clay
@@Collin_NThank yo to reply me. How did you apply the paste to be the surface flat?must be sanded?
hello but did you cut the half moon of the carter? because I also have a vmc gs 56 but it touches me on the crescent of the crankcase
Yes look at 0:43 otherwise the cilinder hits the engine casing
@@Collin_N and how did you cut it like this with a cutter and file
@@silvioceneri2879 with a hacksaw and a file for the fine work
@@Collin_N ok tank you
@@silvioceneri2879 no problem💪🏼
For more questions you can also ask via instagram @dutch_pk50
RMS crankshaft? Why you don't love your engine much? 3.00 primary is good for 102cc but on your setup - it is strange. Or you build it for wheelies only?
What are you talking about, 3.00 is good,nice torque. I know the RMS crankshaft is not the best but I wanted it cheap
@@Collin_N what top speed you have with 3.00 primary?
@@oleksandr50special didn’t have the chance to test it out yet, but it will be around +/- 120 I guess
@@Collin_N lol with 3.00 primary you never get even close for that top speed.
I have less powerful setup than you and it shows 104km/h.
VMC GS 125cc
Rotary intake
PHBL 28
Mazzucchelli ETS crank
VMC Tork exhaust
Vape Road ignition
2.56 primary
VMC Short 4th gear tree
@@oleksandr50special he has 24/72 gear ratio also and his top speed is +/-120
ua-cam.com/video/pjm3w9xFDcQ/v-deo.html
il multispring non mi stacca, cosa potrei fare ?
Hello, do your clutch plates also stick together with the crimaz multispring?
@@Collin_N ??
@@fili2512 I dischi della tua frizione si attaccano?
@@Collin_N in che seno scusa ? io se metto le marcie pigiando la frizione é come se non la pigio non stacca cosa potrei fare ?
@@fili2512 Ho lo stesso problema
Primer skunder ?
Englisch?