I think this video was very good. It gives good information on the basics of where to start. Great job! Bottom line, there is a lot of tools that you may need as your projects progress. I just want to make things happen faster so I am in the market for a nematic nailer. I also know that there are some real safely issues with nematic nailers and learning how not to have an accident is paramount. Reading and learning about wood grain and angle of the nailer is a really good idea to avoid blowouts, ruining projects and safety. There is a lot to learn here guys! Each project has it's specific tool. Someone that is just curious and wants to stop nailing with a hammer needs to ask if they will need strength or stealth first. This will help you determine the right gauge of nail gun needed. Knowing what size nail is something to go and research also. I see that I will be buying several of these nailers as I progress, depending on the project. I want to add facing on cabinets and to build things like bird houses so I chose an 18 for my first nailer. I will likely get a 16 also, soon. Choosing the right compressor is also important. From my limited research, you want to get a compressor that you can grow into. Also I am reading about filters and lubrication systems that should be understood also before committing to matched pair of compressors and nailer guns. Lots to learn new people! Have fun and be safe. Great video guys!
Thank you for this, there is a special now for a set of 21 angle to 2 18 brat guns “freeman”. I am not an expert and just getting started on becoming a weekend carpenter/ handyman for our home. I need to replace the garage frame. Would this 21 framing gun do and what type of nails do I need? Thank you!
I looked up the “Gage” of nails, they explained that an 18ga. Nail had 18 nails per inch, whereas a 10ga Nail had 10 nails per inch. The smaller the number in this case, the thicker the body of the nail.
Great information so here is my question. Since I already own a Brad Nailer should I consider a 15 for the difficult spaces or go for a 16 for the smaller size hole? I will be using the nailer mostly for indoor work crown molding, trim etc.
I’ve just bought an electric 18g brad nailer, actually it’s my second after buying a Stanley that was only used once before it gave up. I bought for making A2 picture frames and as much for holding my glue ups. It will take about 1 1/4 (32mm) nails. I’m very much at the beginning of my journey and I’d rather build up my tools for making splines, mortise and tendon joints etc. I give my images to a charity that’s very important to me and I take great care to print and mount using archival methods. I want my photograph frames to be the very best they can be so nothing reflects badly on the charity. Do you think I might be better with 16g pneumatic nailer as a future purchase. A word of warning ⚠️ I am a photographer and Gear Acquisition Syndrome is a serious condition for us.
It's all good. Very informative past the intro. I know a bit about tools but 0 about nail guns. Customers keep asking me about nail guns and now I am equipped to answer a couple questions. Thanks fellas
What would be a good choice of nailer and compressor size for a beginning hobbyist woodworker who mostly just wants to build birdhouses and bird feeders?
J. T. No man for small stuff like bird houses 18 gauge is fine... if you mostly build with wood glue then 23 gauge pin nailer If you do bigger projects then 16 but 18 is my recommendation and I love the hitachi 18 gauge nailer. Bositech smart-point one is better but to pricey in my opinion
I would start by picking the nail size you want first. Probably a galvanized ring shank nail. You are attaching a 1x stock to a 2x rail most likely. Thats a total thickness of 2-1/2 inches. If you account for some over penetration your max nail length would be 2 inches. In reality you would probably only need to use 1-1/2 inch nails. So find a gun that will be able to use 1-1/2" ring shank galvanized nails. Given the criteria I outlined. I would go with a coiled siding nailer amzn.to/2M1Weax I would also consider using stapler or even a framing nailer amzn.to/2M6qCAQ be careful if you look at those. Some framers cant take a nail as short as 1-1/2", some staplers cant take take a staple as long as 1-1/2". Good luck
18 gage brad nailer. Harborfreight Tools has a good one for under $20 that shoots 18 gage narrow crown staples and brads both. Great value and good quality.
I would think something smaller like 18ga (1" or 1.5" brads) or even a pin nailer. I assume you are using the nails to hold the pieces together so the glue can do its work.
Buy a decent quality rubber hose. Some of the plastic hoses that come with the kits are very stiff (especially when it's cold out) and very annoying to work with. Plus they don't hold up as well as rubber ones. Also make sure you have a quick connect at the compressor so you can store the hose separately if you want to.
The difference between a 15 g and 16g nailer is the 15 is a real round head nail where as the 16 is just a larger brad version of the 18g. The angle of the magazine is not the real difference of these two tools.
+godfrund The angle of the 15 gauge is not the only "real difference" compared to the 16 gauge but it is in fact a "real difference" You are both right and wrong with your response.
Air tools are such great things that those little weenie compressors soon become useless. Always get the biggest one you can carry away or if you buy cheap, you will soon buy again and regret wasting your money on the small one.
If you have to watch this video you should just hire a contractor. You will save money in tye longrun. If you need to ve told that.tye big nail is used for more structural applications like framing and tye little one nire for finishing you should not be building anything
That's just not true There's a first time for everything and with the plethora of how to videos on you tube these days a beginner DIYer can accomplish almost anything a carpenter can. I have never worked on a construction site but I have done everything from framing to finishing molding and I have had my buddy who works as a union carpenter approve of my work. Most problems that the Diyer faces can be solved much easier nowadays with great FREE videos like these.
Philip Marquez if you get enjoyment from it then go for it. If you want to do it to save money then no. Your buying or hiring equipment and spending ridiculous amounts of time completing simple tasks. And believe me your friend is being nice. Your workmanship is average at best
You can assume all you want but you're wrong again. I definitely take more time than a trained carpenter to do certain things but I don't spend "ridiculous amounts of time completing simple tasks" and the tools I bought saved me thousands of dollars that would of been spent on a hiring a contractor. Like I said before, You Tube has endless instructional videos making it much easier for the DIYer to succeed. This isn't really about me though. I'm simply countering your argument so that other people don't get discouraged by your negative comment.
After remodeling 5-6 houses, I'm finally getting pneumatic tools as well as collated screwgun. However, this is the first house we've had to replace half to three fourth of the sheetrock, and half the subfloor. Typically I wouldn't buy something like this buy some ass hat contractor who thinks they are rockstars and thinks they're worth 100 an hour, I'll gladly drop some cash to make the job faster for myself. 50-75 percent of contractors do inferior work anyway. Example: I just redid half my new pex and DWV because my contractor was an idiot (and yes he got my money). So I vote if you know what you're doing, and you have a big job - GET THEM. Saves time. Time is money, and if your contractor sucks he'll double the price, not finish, or do it half assed to get onto the next job. Take your time, get the right tools, do it right. It's cheaper, and better results 60-80 percent of the time. (from experience).
Gents, you answered my direct questions with this video when no others did. Thank you!
Thank you for taking time to make this video. Definitely helped beginners.
I think this video was very good. It gives good information on the basics of where to start. Great job! Bottom line, there is a lot of tools that you may need as your projects progress. I just want to make things happen faster so I am in the market for a nematic nailer. I also know that there are some real safely issues with nematic nailers and learning how not to have an accident is paramount. Reading and learning about wood grain and angle of the nailer is a really good idea to avoid blowouts, ruining projects and safety.
There is a lot to learn here guys! Each project has it's specific tool. Someone that is just curious and wants to stop nailing with a hammer needs to ask if they will need strength or stealth first. This will help you determine the right gauge of nail gun needed. Knowing what size nail is something to go and research also. I see that I will be buying several of these nailers as I progress, depending on the project. I want to add facing on cabinets and to build things like bird houses so I chose an 18 for my first nailer. I will likely get a 16 also, soon. Choosing the right compressor is also important. From my limited research, you want to get a compressor that you can grow into. Also I am reading about filters and lubrication systems that should be understood also before committing to matched pair of compressors and nailer guns. Lots to learn new people! Have fun and be safe. Great video guys!
Hi, what size compressor do you need for pneumatic framing nailers, and which one do you recommend?
Man you guys really nailed it with this podcast
Thank you!
what would you buy if you are gonna be making fences and wood work (benches, cabinets. drawers etc)
Do I need a brad nailer or finish nail for baseboards and shiplap? What size should I get
Thank you for this, there is a special now for a set of 21 angle to 2 18 brat guns “freeman”. I am not an expert and just getting started on becoming a weekend carpenter/ handyman for our home. I need to replace the garage frame. Would this 21 framing gun do and what type of nails do I need? Thank you!
I looked up the “Gage” of nails, they explained that an 18ga. Nail had 18 nails per inch, whereas a 10ga Nail had 10 nails per inch. The smaller the number in this case, the thicker the body of the nail.
What's the best nailers for putting together wooden pallets and patios.Electric and Air nailers ?
Great information so here is my question. Since I already own a Brad Nailer should I consider a 15 for the difficult spaces or go for a 16 for the smaller size hole? I will be using the nailer mostly for indoor work crown molding, trim etc.
can you use 18 gauge to drive a 23 gauge nail? and 16 gauge drive both 18 and 23 gauge? Do they have some backward compatility?
I know this old but you gave specs on them all accept the framing gun. Is the gun I'm researching.
I am going to buy a framing nailer... What is the difference between 20° and 30°
I’ve just bought an electric 18g brad nailer, actually it’s my second after buying a Stanley that was only used once before it gave up. I bought for making A2 picture frames and as much for holding my glue ups. It will take about 1 1/4 (32mm) nails. I’m very much at the beginning of my journey and I’d rather build up my tools for making splines, mortise and tendon joints etc. I give my images to a charity that’s very important to me and I take great care to print and mount using archival methods. I want my photograph frames to be the very best they can be so nothing reflects badly on the charity. Do you think I might be better with 16g pneumatic nailer as a future purchase. A word of warning ⚠️ I am a photographer and Gear Acquisition Syndrome is a serious condition for us.
This is exactly what I needed to know... I appreciate it, guys
Thanks Handy Guys! Great video! Question: should I get a 23 or 18 gauge nailer for nailing many 9 mm (3/8") poplar plywood drawers?
i want to use an air nailer to attach 7/16 osb to 2x6 for an awning roof ,which one is best for the job ?
Now i can chose my nailer with ease, thanks guys.
Nigel Jones Glad to help. We just filmed a follow-up video with more ideas on what nailer to use in specific projects around the house.
are nailers purchased from a pawn shop good?
So did I understand this correctly for my DIY projects around my house and using a framing nailer gun I can get by with a 6 gallon tank?
Paul Fesler yes absolutely. I do home remodeling as my every day occupation with a 6 gallon and it meets every need I have on the job.
2 minutes of intro, is too long.
agreed. that was a long time ago. We have since eliminated longer intros.
It's all good. Very informative past the intro. I know a bit about tools but 0 about nail guns. Customers keep asking me about nail guns and now I am equipped to answer a couple questions. Thanks fellas
What would be a good choice of nailer and compressor size for a beginning hobbyist woodworker who mostly just wants to build birdhouses and bird feeders?
15 gauge perhaps? We also review the makita compressor in another video that is a good size. You can find it here: amzn.to/2diDGhd
J. T. No man for small stuff like bird houses 18 gauge is fine... if you mostly build with wood glue then 23 gauge pin nailer
If you do bigger projects then 16 but 18 is my recommendation and I love the hitachi 18 gauge nailer. Bositech smart-point one is better but to pricey in my opinion
Love your videos I want to ask you guys a question what nail would I use for chair railing a pin nailer or brad nailer
What is the name and model# of gun nailers ? Thank you for your help.
Hey Guys, If I'm doing a board on board fence, which nailer should I use?
I would start by picking the nail size you want first. Probably a galvanized ring shank nail. You are attaching a 1x stock to a 2x rail most likely. Thats a total thickness of 2-1/2 inches. If you account for some over penetration your max nail length would be 2 inches. In reality you would probably only need to use 1-1/2 inch nails. So find a gun that will be able to use 1-1/2" ring shank galvanized nails. Given the criteria I outlined. I would go with a coiled siding nailer amzn.to/2M1Weax I would also consider using stapler or even a framing nailer amzn.to/2M6qCAQ be careful if you look at those. Some framers cant take a nail as short as 1-1/2", some staplers cant take take a staple as long as 1-1/2". Good luck
which type of Air Nailer is good for project like making bed or wardrobe/kitchen cupboard.
u can use a brad nailer to hold it down, i suggest using screws and maybe a drill will make it....
Which one of these nailers can I use to build a wood fence
A framing nailer. Shoot stainless ring shank nails. amzn.to/2nf6XyE with amzn.to/2nMW4GE
ok im looking at making ammo boxes out of 1x's some bird feeders and stuff what would be a good nailer?
18 gage brad nailer. Harborfreight Tools has a good one for under $20 that shoots 18 gage narrow crown staples and brads both. Great value and good quality.
i love the condesending manor info is given
Ken Jones ... is it...?
Which nailer should you use for making things like Bird Houses. What GA.
I would think something smaller like 18ga (1" or 1.5" brads) or even a pin nailer. I assume you are using the nails to hold the pieces together so the glue can do its work.
Thx for the email, Exactly what I needed to know.
air tools have cfm recommendations for air compressors.
YEs good point. Definitely something to look up before buying your air tools and/or compressor.
ຂອບໃຈຫຼາຍ Lao language mean Thank you very mush to make me understand
Buy a decent quality rubber hose. Some of the plastic hoses that come with the kits are very stiff (especially when it's cold out) and very annoying to work with. Plus they don't hold up as well as rubber ones. Also make sure you have a quick connect at the compressor so you can store the hose separately if you want to.
good point and very true!
thank you.
The difference between a 15 g and 16g nailer is the 15 is a real round head nail where as the 16 is just a larger brad version of the 18g. The angle of the magazine is not the real difference of these two tools.
+godfrund The angle of the 15 gauge is not the only "real difference" compared to the 16 gauge but it is in fact a "real difference" You are both right and wrong with your response.
Helpful, Thx's
a couple of college grads that are trying to be tradesman
Air tools are such great things that those little weenie compressors soon become useless. Always get the biggest one you can carry away or if you buy cheap, you will soon buy again and regret wasting your money on the small one.
23 is the smallest
jesus. can you make a video with no audio?
Rock paper nailer..i win lol
Sooo cheesey:)
If you have to watch this video you should just hire a contractor. You will save money in tye longrun. If you need to ve told that.tye big nail is used for more structural applications like framing and tye little one nire for finishing you should not be building anything
That's just not true There's a first time for everything and with the plethora of how to videos on you tube these days a beginner DIYer can accomplish almost anything a carpenter can. I have never worked on a construction site but I have done everything from framing to finishing molding and I have had my buddy who works as a union carpenter approve of my work. Most problems that the Diyer faces can be solved much easier nowadays with great FREE videos like these.
Philip Marquez if you get enjoyment from it then go for it. If you want to do it to save money then no.
Your buying or hiring equipment and spending ridiculous amounts of time completing simple tasks. And believe me your friend is being nice. Your workmanship is average at best
You can assume all you want but you're wrong again. I definitely take more time than a trained carpenter to do certain things but I don't spend "ridiculous amounts of time completing simple tasks" and the tools I bought saved me thousands of dollars that would of been spent on a hiring a contractor. Like I said before, You Tube has endless instructional videos making it much easier for the DIYer to succeed. This isn't really about me though. I'm simply countering your argument so that other people don't get discouraged by your negative comment.
Philip Marquez if you enjoy it then good. If your trying to save money then just no
After remodeling 5-6 houses, I'm finally getting pneumatic tools as well as collated screwgun. However, this is the first house we've had to replace half to three fourth of the sheetrock, and half the subfloor. Typically I wouldn't buy something like this buy some ass hat contractor who thinks they are rockstars and thinks they're worth 100 an hour, I'll gladly drop some cash to make the job faster for myself. 50-75 percent of contractors do inferior work anyway. Example: I just redid half my new pex and DWV because my contractor was an idiot (and yes he got my money). So I vote if you know what you're doing, and you have a big job - GET THEM. Saves time. Time is money, and if your contractor sucks he'll double the price, not finish, or do it half assed to get onto the next job. Take your time, get the right tools, do it right. It's cheaper, and better results 60-80 percent of the time. (from experience).
Ha Ha. It’s like a tool show parody without humor.
B. A. F.