28(ish) 3D Printed Tools That Are ACTUALLY Useful!

Поділитися
Вставка
  • Опубліковано 15 тра 2024
  • Yes, there ARE 3D Printed tools that you can actually use - and some are even more functional than the store-bought ones!
    After all... is there anything more frustrating than needing a very specific tool to finish a fix or a 3d printing project, only to discover that you can't get it in time? Well stick around because in this video I'm going to share with you my top 28 ish 3D printed tools as well as tips for printing them, what they're used for and why I love them so much. These are some of my MOST functional and useful 3D Prints EVER... and I know you're going to love them, too!
    🤫 Get behind the scenes and exclusive content on my Patreon: / thenextlayer
    💬 JOIN MY DISCORD: jle.vi/tnl-discord
    🎥 IN THIS VIDEO: 🎥
    00:00 Introduction
    01:22 Bench Dogs for Your Work Table: www.thingiverse.com/thing:404...
    02:27 Speed Square: www.thingiverse.com/thing:465...
    03:55 Screw Measurer: www.printables.com/model/3216...
    04:24 Improved Screw Measurer: www.printables.com/model/2088...
    04:59 Fillet Gauge: www.printables.com/model/9673...
    05:40 Keychain Version: www.printables.com/model/2767...
    06:04 Makita Battery Holder: www.printables.com/model/5870...
    06:31 Makita Charger holder: www.thingiverse.com/thing:438...
    Cable wrap holder: www.printables.com/model/3031...
    06:58 Makita Tool Holder: www.printables.com/model/2561...
    My custom makita tool holder for Arrow Sheds: www.printables.com/model/2979...
    08:17 3D Printed corner templates: www.thingiverse.com/thing:475...
    Router version: www.printables.com/model/10693
    08:37 Prusament clamps: www.printables.com/model/758-...
    09:12 Remixed Prusament Clamps: www.printables.com/model/2473...
    09:29 Pocket hole Jig: www.printables.com/model/9619...
    09:58 Metric Drill Hole Guide: www.printables.com/model/1726...
    10:22 3D Printed Scraper Tool: www.printables.com/model/1228...
    11:13 Drill Bit sharpening tool: www.printables.com/model/1332...
    12:20 Hand Shovel: www.thingiverse.com/thing:477...
    13:08 Hole Measuring Tool: www.printables.com/model/2739...
    13:25 3D Printer Nozzle Wrench: www.printables.com/model/8695...
    14:14 Sanding Block holder: www.printables.com/model/1229...
    14:42 Drill Stopper: www.printables.com/model/6844...
    16:05 Bit Holder for Drill: www.printables.com/model/2076...
    16:59 Glue Spreader: www.printables.com/model/8689...
    17:33 Hose Adapters for Vacuums: www.printables.com/model/8093...
    Drill Vacuum Adapter: www.printables.com/model/3886...
    18:14 3D Printed Deburring Tool: www.thingiverse.com/thing:198...
    19:21 Cable Soldering Jig: www.printables.com/model/1324...
    LED Strip Jig: www.printables.com/model/1200...
    19:40 Lazy Susan with an Empty Spool!: www.printables.com/model/3536...
    20:25 Spool Drill Winder: www.printables.com/model/1165...
    20:38 Filament Welder: www.printables.com/model/2911...
    🛒 RECOMMENDED GEAR: 🛒
    📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
    📍 Complete list of my videography gear: kit.co/jlevi/content-creation
    📍 My favorite 3D printing filament: jle.vi/polymaker
    📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
    📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
    📍 Check out the official TNL merch: shop.thenextlayer.com/
    📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
    RECOMMENDED VIDEOS:
    👉 Hardware to make your 3d prints more useful: • Make USEFUL 3D Prints ...
    👉 50+ Useful 3D Prints You Never Knew You Could Print • 50+ Useful 3D Prints Y...
    ❤️ LOVED THIS VIDEO? ❤️
    ▶️ Subscribe to the channel
    🔔 Turn on Notifications
    ✍️ Write a comment below!
    👍🏿 Like this video
    #3dprinting #3dprinted #3dprinted
  • Наука та технологія

КОМЕНТАРІ • 617

  • @thenextlayer
    @thenextlayer  Рік тому +58

    Thanks so much for watching! I LOVE hearing from you all, and I read every comment, so let me know what you think, or any ideas you have for future videos, in the comments below!

    • @Nevio_024
      @Nevio_024 Рік тому +2

      Hi! A „Tools for 3d Printing“ video would be really nice!

    • @3dprintedhardware
      @3dprintedhardware Рік тому +2

      Email me, I'll hook you up with my 3d printable tool set which includes hardware tools like an adjustable wrench, pliers and a 12 piece wrench set..standard and metric 👍
      I have more tools on the way that will be added to the set, many of which are in the final testing stage right now. Although the tools in the tool set will work best if printed in metal or high temp hardened plastics, they are still fun and even useful around the house if printed in PLA, especially if your using the tools on newer, rust free nuts and bolts (or 3d printed nuts and bolts). I think this set would be perfect for your next "useful 3d printed tools" video.
      Btw..I just found your channel, looks awesome, I subscribed!!

    • @Nevio_024
      @Nevio_024 Рік тому +1

      @@3dprintedhardware That sounds nice! Can I get that too? What‘s your email?

    • @glittalogik
      @glittalogik Рік тому +1

      I'm honestly so impressed with how enthusiastically you've taken on advice and constructive criticism, it's genuinely awesome to see your production and editing style developing - and your subscriber count climbing - with every new video :)
      Did something weird happen to the footage of you at 10:25 ? I'm watching in 1440p and that bit seems super compressed...

    • @Nevio_024
      @Nevio_024 Рік тому +1

      @@3dprintedhardware Thank you!

  • @NochSoEinKaddiFan
    @NochSoEinKaddiFan 11 місяців тому +63

    The way you used that pocket hole jig was actually painfull. If the drill is not the same size as the hole you feed it through to the wood, you don't have any benefit from the jig. and if it does have the same size, the drill will eat your jig, so you need a metal surface inside there. Good idea in principle, but this is a one use disposable tool if you use it right. And if you don't use it right, you don't have to use it at all, because it does nothing for you.

    • @josiahbaumgartner7643
      @josiahbaumgartner7643 4 місяці тому +2

      Waaah waaah

    • @IanFitty
      @IanFitty 3 місяці тому +2

      I wonder if brass inserts would be a good addition. Should be easy to find and hold up for a bit even though it’s pretty soft.

    • @NochSoEinKaddiFan
      @NochSoEinKaddiFan 3 місяці тому +3

      @@IanFitty It might, certainly better than just trying to guide your drill with pure plastic

    • @dustyshifflett391
      @dustyshifflett391 3 місяці тому +7

      @@josiahbaumgartner7643 I'm positive you are just as painful to watch use tools

    • @curtsiekert
      @curtsiekert 3 місяці тому

      Perhaps this is true for someone like yourself.

  • @cmcferin
    @cmcferin Рік тому +184

    Would really like to hear about what different things like bearings, hardware, and others were super useful for you!

    • @thenextlayer
      @thenextlayer  Рік тому +21

      On it!!!

    • @bigdogbigben
      @bigdogbigben Рік тому +1

      @@thenextlayer Yes please

    • @almaefogo
      @almaefogo Рік тому +2

      M3 screws kit should be included with every printer most of the 3d printed things use M3 screws and nuts

    • @GenJester
      @GenJester Рік тому +2

      Yeah sooner the better on this one. Aliexpress shipping times are slow.

    • @rolanddube2169
      @rolanddube2169 Рік тому +1

      I just subscribed based on seeing that video. I look forward to it.

  • @polarbearjf
    @polarbearjf Рік тому +58

    Yep! Would definately love to see your 3D Printing tool collection, keep up the great work! Also the bearing screws etc you have for just in case projects would be awsome too!

  • @tomsmith3045
    @tomsmith3045 Рік тому +5

    Thanks for this! I was expecting the list to have maybe 3-4 useful tools out of the giant list, but you presented MANY useful tools. You also presented tools that weren't just specific to 3D printing, which is even better.
    I'd love to see integration of 3D prints with other building techniques, such as woodworking and working with metal. As an example, 3D printed bushings to work with steel square tubing, to permit rotation or telescoping designs that may require some mig welding, but that don't need lathe or mill work, because of 3D.

  • @alexjunk6216
    @alexjunk6216 Рік тому +4

    I would love to hear more about all the extra components you have around for your projects or even what you have on hand to troubleshoot your printers. Thank you!

  • @thomasswenddal772
    @thomasswenddal772 5 днів тому

    You are just a fountain of great ideas, secondhand maybe or original I couldn't keep up with the flow but I'm seeing some real possibilities here. Thanks so much; keep up with these useful shop and fixing problems type videos. Everybody has a world of challenges.

  • @svorwerk
    @svorwerk Рік тому +6

    Awesome videos man, I really appreciate the time and effort you put into the presentation of your vids. I just wanted to cast my vote for the video about the tools you use to improve your workflow. Thank you so much!

  • @xMikeyG
    @xMikeyG 2 дні тому

    Honestly... Ive been on the fence about buying a 3D printer but never considered printing out tools. This for sure was the selling point.

  • @DEtchells
    @DEtchells Рік тому +7

    Another vote for a video on useful components(!)
    I’m all about having stock on hand so I have it when I need it, being able to just place one big Ali express order to get equipped would be great!

    • @thenextlayer
      @thenextlayer  Рік тому

      Awesome! Thank you! Make sure you're subbed, I'm already working on the video :)

  • @odw32
    @odw32 Рік тому +2

    For the bit holder: Try out carbon-fiber polycarbonate, it's slightly flexible but also very strong. It needs an abrasive-resistant nozzle, a well-maintained printer, in some cases a temperature-controller enclosure, a ~100c bed and a ~300c hotend. Your Prusa should be able to handle that though! It's definitely not my favorite material to print with, but it is my favorite in terms of end product properties. Another thing to try is to just make a "solid block" with slightly oversized hex-shaped holes in it, and put a strong neodymium strip embedded in the bottom to hold the bits in their holes. Absolutely loving your channel btw, and the clean look of your studio!

  • @bleach_drink_me
    @bleach_drink_me 8 місяців тому

    I found a useful tool last winter. Ice scraper. I tried PLA,PETG,TPU. I found tpu worked fantastic once it was cold(left in the car) petg was a good 2nd option.
    Also a nice little salt scoop printed from pla was helpful.
    We got hit with a surprise snow/ ice storm and i wasnt ready so i fired up the printers.
    Those solder jigs are useful. Print them from petg or better for temp resistance. I have one in ABS and another in PC.

  • @bc4yt
    @bc4yt Рік тому +8

    Super keen for the extra components video. Tools would be interesting also 👍

  • @PDXGTP
    @PDXGTP 11 місяців тому +1

    This topic is the reason I bought a 3D printer, I'm frustrated with suppliers not providing tools within a reasonable amount of time, over pricing, and missing design features.. I solved all of that by learning AutoCad and getting to know my printer.
    Thank you, it's people such as yourself that have helped me get to know the in's and out's of my printer.

    • @thenextlayer
      @thenextlayer  11 місяців тому

      My pleasure thanks for taking hte time to comment!

  • @pospa7075
    @pospa7075 3 місяці тому

    Thank you so much for this video, I am beginner printer and I didnt know what to print, this video helped me a lot to decide what to print.

  • @billcs66
    @billcs66 Рік тому +5

    The 3d list of part you need would be great. Thank you

  • @genjitsu7448
    @genjitsu7448 3 місяці тому +1

    So the tools all turned out to look much more useful than I might have guessed. It is very impressive where this tech is going - it wasn't that long ago that I thought that 3DP would never really end up capable of production level parts but it is getting closer and closer. Great video!

    • @thenextlayer
      @thenextlayer  3 місяці тому +1

      You should see the newer printers. This video is old and the parts were crappy. Today we have moved way past

  • @davidapp3730
    @davidapp3730 Місяць тому

    Thank you for the great video. Being new to 3D printing I am just learning all that I can do with it.

  • @dovfeder3253
    @dovfeder3253 3 місяці тому

    Just ran across you channel and am very impressed. Thank you for you time and effort. Most importantly, I pray you and all of your loved ones are staying safe during these horrendous times. Peace brother. - Dov

  • @RealSnail3D
    @RealSnail3D Рік тому +3

    Love your channel! Thanks for all your hard work, it shows and it’s helpful

  • @wayne6318
    @wayne6318 Рік тому +1

    So many projects, all of them are so useful and I can't wait to get started. The "Tool List" that you mentioned would be a great idea, hope to see it soon

  • @Bcjc3
    @Bcjc3 Рік тому +4

    All the videos! Do all the videos you mentioned! We want to see tools for 3d printing. We want to see extra parts and hardware for 3d printing. We want to see every video idea you can come up with!

  • @MrRoelith
    @MrRoelith Рік тому

    Would definitely like to see that video on what additional items you recommend keeping around. Thanks for the video!

  • @nightlurker
    @nightlurker Рік тому +1

    MORE!!!!!! Thank you, Jonathan, for these print ideas and tools videos, please let us have more of them. I would particularly like to see tools and storage for 3D printing, both FDM and resin. This video convinced me to subscribe, so keep it going, please.

  • @PTEC3D
    @PTEC3D Рік тому +1

    Very much enjoy your videos. Enjoyed this one, radius gauges and bench dogs were new prints to me, thanks for finding and sharing.

  • @mcdesigns
    @mcdesigns Місяць тому

    Really enjoyed that video, never knew I needed some of them.

  • @joefairfax
    @joefairfax Рік тому +1

    Great video, I liked a lot of the tools you showed. I really liked the cordless tool battery and tool holders for organizing your small storage space. All of the suggested videos you asked about I think would be great.

  • @stan1471
    @stan1471 8 місяців тому

    I’m interested in that filament welder for sure!!!!

  • @stewartg2101
    @stewartg2101 Рік тому

    LOL, literally only just watched your last vid and left a comment saying "hell yes" to the tool vid and low and behold here it is just like magic. thank you.
    Hell yes again to the 3d printing tools used in 3d printing vid. Loving this channel.👍👍

  • @giantthoraway7526
    @giantthoraway7526 Рік тому +1

    A general hardware video would be awesome! All I have are a few extra nuts and bolts that came with the printer and would love to know what things I should look for (actually… they might not have supposed to be extra considering the wobbliness of some of the components…)

  • @ashokmoghe8035
    @ashokmoghe8035 Рік тому +10

    I am DIY Hobbyist & Woodworker. I just bought a new 3D printer over the holidays. My goal for getting a 3D printer is precisely this i.e. building functional items around home & workshop. Your channel seems very much aligned to that same goal.
    Subscribed to your channel already & looking forward to more relevant content.

    • @iamcoderedd
      @iamcoderedd Рік тому +2

      You’re gonna fall in love bro especially if you’re in woodworking it’s so many things you could print 😭😭🔥🔥

  • @shanel4348
    @shanel4348 Рік тому +1

    Awesome video! I particularly loved the dremel tool sharpener; that was pretty genius. Thanks for all of the ideas!

    • @thenextlayer
      @thenextlayer  Рік тому

      Glad you liked it! Make sure you're subbed

  • @ily9718
    @ily9718 Рік тому +1

    An English speaking, Israeli, 3D printing content creator. Honestly kind of a rare sight. But glad to see 3D printing content from here though, and especially in English. Great production and content too. I have a bit too many printers and parts but frankly my organization surrounding them is a bit awful. I’ve been meaning to print a Gridfinity but it always seems like such a huge project.

    • @thenextlayer
      @thenextlayer  Рік тому

      Haha yeah. Though the famed designer Dizingof is Israeli too

  • @Mr2at
    @Mr2at 4 місяці тому

    Ordered my first 3D printer earlier today. This is the first 3D relevant channel ive subscribed to.

  • @SgtShadowCow
    @SgtShadowCow Рік тому

    YES PLEASE for fasteners and bearings and press-fits needed for common prints.
    Received my 3d printer for Christmas, i am printing away and crash course learning and your channel is helping me immensely. thank you :D

  • @JacksMacintosh
    @JacksMacintosh Рік тому

    Loved this video! Definitely printing that speed square asap. Thanks, and shavoua tov!

  • @renierbonthuyzen9703
    @renierbonthuyzen9703 6 днів тому

    Hey there. Just so you know. The fillet gauge is actually used to measure welding fillets. Many kinds of welds need a specific radius to comply with code.

  • @thebunnybun
    @thebunnybun 9 місяців тому

    I know it's been a long time since the video went up but I have an idea for the drill bit holder towards the end. If you can't print anything that won't get eaten up maybe print a thing that holds the little plastic holder the bits come in. You'll have all relevant info right there to. That is if they come in like endmil tubes or whatever. Or hell melt a little wax or whatever they do after they reground endmil and send them back to you just twist it off and back on under whatever printed holder you have. Idk just an idea I don't have a printer and I'm not a designer.

  • @nerdipedia1142
    @nerdipedia1142 Рік тому

    I am totally interested in the additional videos you mentioned! Love this channel.

    • @thenextlayer
      @thenextlayer  Рік тому

      Awesome! Thank you! Make sure you're subbed, I'm already working on one of them :)

  • @jimlynch9390
    @jimlynch9390 Рік тому

    Thank you for the tools. It's great to see a master at work!

  • @VastCNC
    @VastCNC Рік тому +1

    The onhand project items list I'm here for.

  • @antoniovelez8780
    @antoniovelez8780 Рік тому

    Loving the content, for a relative newcomer your stuff is super polished, a joy to watch. Keep it light, keep it fun, it's a hobby after all.

    • @thenextlayer
      @thenextlayer  Рік тому

      Thank you so much, this means a lot to me

  • @ryanmacewen511
    @ryanmacewen511 3 місяці тому

    I'm happy to have discovered your channel!

  • @JohnBlaze505
    @JohnBlaze505 8 місяців тому

    I feel like alot of these 3d print tool videos dont have much to offer, but this video has a lot of great ideas!! Cant wait to print the makita battery and charger holders

  • @williamweatherall8333
    @williamweatherall8333 Рік тому +1

    The list of supplies is a great idea! I would watch it.

  • @jere7429
    @jere7429 Рік тому +2

    yes a 3d printer tools video would be great just started 3d printing and its so awesome to be able to make your own things at home

  • @zedular098
    @zedular098 8 місяців тому

    Hey man, I am also new in the 3D printing world, and this video is really nice, keep up the good work, for few items, presented here really gave me great ideas for printing. Thanks

  • @thepmiles
    @thepmiles Рік тому

    First video of yours I've come across and it re inspired me to get some prints going. Great Video, Thank you.

    • @thenextlayer
      @thenextlayer  Рік тому

      Awesome! Thank you! Make sure you're subbed, I have much more coming soon...

  • @nickgunderson
    @nickgunderson Рік тому

    Nice video! You showed a lot of cool things and the time spent on each one was just right! Looking forward to more of your work!

  • @SuperPapadave
    @SuperPapadave 2 місяці тому

    Well DONE !!! I learned a lot. Thx

  • @chazbarclay
    @chazbarclay Рік тому

    Awesome. I'm gonna make some using my Tormach and anodize them. Thanks for the idea.

  • @milwsdl39
    @milwsdl39 9 місяців тому

    OK I’ve been watching your videos really cool I would like to get into this hobby looking for a decent system. Not sure what I want to do yet. What kind of computer do I need or do you have a video on that?

    • @thenextlayer
      @thenextlayer  9 місяців тому +1

      Any computer is fine. My recommended printers are jle.vi/sovol if you have a low budget and jle.vi/bambu if you have a mid to high budget :)

  • @juliehadley8336
    @juliehadley8336 Рік тому +2

    Bring on the video for tools to assist 3D printing! ❤

  • @droidvegas331
    @droidvegas331 Рік тому

    Great info, I'm on board to watch your content. Just subscribed and gonna binge watch everything!

  • @chriscarrozza1820
    @chriscarrozza1820 Рік тому

    I am just starting so the parts list of bearings and bolts would be excellent! thank you for this video

    • @thenextlayer
      @thenextlayer  Рік тому

      It's already live, check out my other videos :)

  • @lsmedel00
    @lsmedel00 Рік тому

    Wow this is really cool! can't wait to start printing the fillet gauge and the screw measure!!

  • @drumcamper
    @drumcamper Рік тому +3

    The video on hardware would be great, I've experimented with some hidden / inlaid nuts and would be interested in more ways to implement that technique.

    • @thenextlayer
      @thenextlayer  Рік тому

      Awesome! Thank you! Make sure you're subbed, I'm already working on the video :)

  • @Gomeyy
    @Gomeyy Рік тому

    Just bought my first printer and been looking at videos to learn more about useful tools, cool first time prints etc. never would’ve thought this was a newer channel, earned a sub for sure!

    • @thenextlayer
      @thenextlayer  Рік тому

      Thanks! The best is yet to come. What questions do you have? I like ideas for videos

  • @therick0996
    @therick0996 Рік тому +2

    i never need an excuse to spend money on 3D printing. bring on the tool list!

  • @mandyj5222
    @mandyj5222 Рік тому

    Yes, please list the various items to put together prints. I never know what bearings and screws etc to buy so I end up avoiding those prints all together 😏 I'm still not a boss at PETG so, baby steps for usable tools and brackets. I just like making these items in colors I love 😍 it's hard to find things in rosey purple ☺️ Have a great week! Thanks for these videos, keep it up! I appreciate the inspiration and advice! I'm an Ender 3 S1 Pro kinda gal right now and am looking at what I want my second printer to be like 🤔 too many choices!!

    • @thenextlayer
      @thenextlayer  Рік тому

      ON IT! :) Make sure you're subscribed.

  • @JohnLattanzio98
    @JohnLattanzio98 Рік тому +3

    I would love to see a video of yours on more useful prints!

    • @thenextlayer
      @thenextlayer  Рік тому

      Did you see the 50 useful prints? :)

    • @JohnLattanzio98
      @JohnLattanzio98 Рік тому

      @@thenextlayer yes and I loved all the things to make to solve so many problems! Your channel is really good

  • @wanderlust_vlad
    @wanderlust_vlad Рік тому +1

    Geez, will take some into work. Thanks a lot!

  • @Hydraks81
    @Hydraks81 Рік тому

    I just discovered your channel, i'm sub, keep going !
    Love all these tools ideas, i definitely will print some of them

  • @Shaggyfauvorite
    @Shaggyfauvorite 11 місяців тому +1

    Btw for all of the screw measurers and fillet gauge you don't need to print in 2 colors, you can print it in one and get spray paint. Spray some paint on a flat piece of cardboard and press the side with the numbers/letters onto the cardboard and voila, you have easy to read numbers.

    • @CoffeeandCancerStix
      @CoffeeandCancerStix 2 місяці тому

      Honestly you could just use a marker or paint pen to color the numbers

  • @RixTrix
    @RixTrix 5 місяців тому

    Please yes video for tools! And not specifically 3d printed tools, but actual tools I need. I just got my first 3d printer and I want to not have to head to the store every time I see a tool I’ll need.

  • @Noki0100
    @Noki0100 Місяць тому

    For the bit holder trying print it as a mold, then using a silicon pour so it has some give and is flexible when cured.

  • @Mirellas_creaties
    @Mirellas_creaties Рік тому

    I just orderd my first 3d printer and binge watching your videos. Can't wait to start, but have to because the printer has not arrived yet. Thank you for your helpfull videos, I'm learning a lot!

  • @zk_6312
    @zk_6312 10 місяців тому

    Nice to see useful 3d prints. I just put together a table saw fence and used a lot of 3d printed parts. I think I might try those drill stops. I have a couple sets of the metal collars, but they always come loose. I print exclusively with PETG as my Microswiss all metal hotend always clogs with PLA.

  • @firelion98
    @firelion98 Рік тому

    A list of common shopping list to have around would be nice, I am still wondering what bearing size I should have on hand

  • @BobbyatTBP
    @BobbyatTBP Рік тому

    loved this video and would be very interested in all of the videos you mentioned that you could bring out in the future

    • @thenextlayer
      @thenextlayer  Рік тому

      They’re all out. Check my other vids.

  • @DavidBurnham
    @DavidBurnham Рік тому

    I printed some of the Bench Dogs in PETG a few years ago. My only issue was after a year of usage the small tabs on the bottom started to break. I need to try orientation and/or ABS for the next batch. :-)

  • @mol8821
    @mol8821 Рік тому

    Love this! I’m going to be all over the tool and battery holders!

  • @kiridox2517
    @kiridox2517 Рік тому +1

    I preordered the p1p Bambu and it is shipped! Me and my friend bought 1 each to learn 3D printing together. it is tons of fun and cool to finally have bought one!
    We are both Starters to this and we have done a lot of training and watching youtube guides :D

  • @Your-boy_showinluv
    @Your-boy_showinluv 6 місяців тому

    I hope you are ok out there during this time!🙏🏼
    I appreciate all your help on 3d printing as well!

  • @monkeyman6292
    @monkeyman6292 Рік тому

    Thanks for making this. Some really cool little tools to print and use. You should so do all the videos you mentioned. Also more detail on that filament welder please.

    • @thenextlayer
      @thenextlayer  Рік тому

      Awesome! Thank you! Make sure you're subbed, I'm already working on one of them :)

    • @imwacc0834
      @imwacc0834 Рік тому +2

      @@thenextlayer The link for filament welder is not working

  • @thebeardeditguy6874
    @thebeardeditguy6874 Рік тому

    The filament welder you linked in the description appears to no longer exist at that link. Do you happen to know of an updated link or any way I might be able to get the files? I have many almost empty rolls that I would like to splice together but the first one I tried was never very reliable

  • @Christina-CA-808
    @Christina-CA-808 Рік тому

    Please do make a video regarding all the extra accessories you've found on your 3D printing jounrey! There are so many cool things I wanna print, but I'm not very knowledgable with nuts, bolts, etc. So if you can make a video of what you've come to collect that'd be really great! Thanks for this awesome video! It's taught me a lot.

    • @thenextlayer
      @thenextlayer  Рік тому

      ON IT! :) Make sure you're subscribed.

  • @pierrec1590
    @pierrec1590 Місяць тому

    For a lazy suzan, you can also print two identical circular plates with a semi-circular profiled groove along the perimeter, where you put glass marbles as ball bearings.

  • @joshnullentry4580
    @joshnullentry4580 Рік тому

    this is a bunch of great ideas, thank you!

  • @frrapp2366
    @frrapp2366 4 місяці тому

    as a farmer i can tell anyone how much it helps to have a cabinet with various bolts, nuts, clips, angle brackets, ect. just picked up a flash forge guider 2s at auction site havent set it up yet so checking out ALL the vids i can thanks for the tips and tricks to make better prints happy holidays from Oklahoma

  • @LoeKie_Aus
    @LoeKie_Aus Рік тому

    There is never too Much Info or tips, BRING IT ON!!!

  • @martshal
    @martshal Рік тому +5

    Yes, interested in both a "tools for 3D printing" video, and a listing of "things" that you think are useful for 3D printing projects.
    Also, if you've added some more to your gridfinity setup, splash a little of that into the above vids.

    • @thenextlayer
      @thenextlayer  Рік тому

      Oooh yeah. I’m doing a whole new drawer now so more coming soon

  • @wl7291
    @wl7291 Рік тому

    Great video and lots of really useful prints. I can print some of these together also.

  • @Foxuniverso
    @Foxuniverso Рік тому

    i work with leather as a hobby, you just opened my mind in such a ridiculous way that i think i can say you changed my world. thanks dude lol, now i really, really want a 3d printer

    • @thenextlayer
      @thenextlayer  Рік тому

      WOW! Thanks! that's a HUGE compliment. Check out the Prusa link in my description, I still recommend that one :)

  • @chadholt9590
    @chadholt9590 Рік тому

    Absolutely would love a list of recommended stuff to order for bearings/nuts/bolts/etc!!!

  • @The_Privateer
    @The_Privateer Рік тому

    My favorite 3D printed tools are ones that go BANG!
    Yes, these are tools. They are not 'good' or 'evil' on their own. Only the user and intended purpose determines that.

  • @pimpMyPogo
    @pimpMyPogo Рік тому

    Great video! So cool seeing one of my designs (the cold shoe clamp) in a high quality video made by someone on a different continent! Thanks for the mention!

  • @r3dsnapper
    @r3dsnapper 6 місяців тому

    I bought my 3d printer for the specific purpose of printing bench dogs. I live in the us and have metric MFT table (20mm holes). Great list thanks.

  • @tasmedic
    @tasmedic 4 місяці тому

    Yours is by far the best selection of printable tools that are actually useful.
    You're a clever guy. Please make more videos!
    One small thing. Maybe set your camera to fixed focus because it wanders a bit during some of your presentations. A minor thing, to be sure.

  • @babyboie20
    @babyboie20 Рік тому

    I'm the same with you not knowing about different nuts and bearings that I might need. Just started so that video would be very helpful and I would be really grateful.

  • @merrillalbury8214
    @merrillalbury8214 Рік тому

    I printed various tools. One in particular allows me to tighten 1/4 in nylon nuts for use on closure bar arm on our community gates.

  • @antonypalmer5804
    @antonypalmer5804 Рік тому

    Brilliant Video that gives me a list of things to print for my workshop.😁😁

  • @stephank1965
    @stephank1965 Рік тому

    Very useful stuff. Thank you so much👏👏👏

  • @path4061
    @path4061 4 місяці тому

    Once I get my 3d printer and go through a few small projects, one of the first "big" projects I want to tackle is making a dovetail jig. I'd be super happy if I could make something with the functionality of a Leigh super 12", but even if it all has to be fixed in place like a Porter Cable 4212 it will be a great boon to me.

    • @thenextlayer
      @thenextlayer  4 місяці тому

      Genius idea. So much money saved.

  • @wintersstorm1469
    @wintersstorm1469 Рік тому +1

    Ive been looking for something like the filet tool (idk if thats right) thanks!

  • @AB-these-handles-are-stupid

    Pretty thorough. Something that can’t really be changed easily is your voice. You have a great voice for this. It’s very calm and understandable. Your not peaking all the time yet your inflection is sensed well. I think you may need more knowledge in general construction, but that’s not what this channel really is right? I’ll definitely sub and will be waiting for reviews and stuff like this video.
    Edit: spelling mistake

  • @thejurassicgameroom9344
    @thejurassicgameroom9344 3 місяці тому

    my first printer is in the mail, excited to be joining the "makers"(?) ranks. these videos are super helpful, bc I have no idea wtf imma do with a printer lol.

  • @sail4life
    @sail4life Рік тому

    Great video! Thanks very much. Love 3d printed tools and handy gadgets.

  • @jhbonarius
    @jhbonarius Рік тому

    nice!.... nut 9:45 did you just put that corner hole jig on the wrong side? I mean, the holes should go from one board to the other... or was your intention to screw the board to the workbench?

  • @stevewilliams91
    @stevewilliams91 Рік тому

    Another great vid! Do you have a link for the cable wrap?

    • @thenextlayer
      @thenextlayer  Рік тому +1

      Uploaded just for you Steve! www.printables.com/model/303120-cable-cleat-cable-wrap

    • @stevewilliams91
      @stevewilliams91 Рік тому

      @@thenextlayer Amazing, thank you, it's much appreciated! Keep up the good work!