Great presentation. My controller shut off after the motor stutterd a few times. Seems I had not pushed the XT 90 connector battery to controller. What model is the controller and where can I get it. Link appreciated Thank you.
Can you demonstrate the hooking up of the power wire to the battery plz. I bought a used controller and it didn't come with the pre-chared circuit or a fuse.
i have a kelly 7230 s and need to know what to enable or disable or number to change to get the varable regen brake working can anyone help with this please
Either I look for the specs on the motor, or take a look at the motor's stator and measure out the hall angles. If anything I also just try one or the other.
In the description you said it’s a square wave, but on the website it claims to be a sine. Did you get the 48v or 72v? I’m thinking of getting the 72v and curious if I can program the Voltage cutt off down to 48v
Hi, I also have the same controller as you. I connected everything the same as you but it doesn’t work. It shows me a continuous red light. Can you help me ?
Thanks to the helpers identify error and continuous red light
Thanks for this you may have solved an old issue with a useless seeming expensive controller which has been sat in box for 5 years 😊❤️👍
I am need of a kelly controller for the Cyclone 3000W motor. My bike uses a 52V battery. Your help is well appreciated so I can get riding again.
Thanks a million for this video!! You saved me tons of time and headache with the hall sensors, seriously thanks soo much!
Absolutely! glad it was usful.
Your hall sensor wiring trick worked great as you described it. That probably saved some time on my project - thank you!
Bro so helpful, thank you. Just ordered my KBS72121x
no worries! Awesome!
Great tutorial.
Where can I get that Kelly controller?
Great presentation.
My controller shut off after the motor stutterd a few times. Seems I had not pushed the XT 90 connector battery to controller.
What model is the controller and where can I get it.
Link appreciated
Thank you.
How does the BMS affect on controller precharge? Why didn't you you a contactor?
Molto bravo!💪
Can you demonstrate the hooking up of the power wire to the battery plz. I bought a used controller and it didn't come with the pre-chared circuit or a fuse.
Show how you hook up the controller to the computer and if you have to powerful the controller to program it?
Is there a way to have dual controllers for front and rear motors
Would have been nice to know how to connect the cut off brake? very important.
Nice video. Do you have any info on wiring the display?
thanks! sorry for the late reply. I don't as of right now.
wht battery do i need for 45Amp controler?
i have a kelly 7230 s and need to know what to enable or disable or number to change to get the varable regen brake working can anyone help with this please
do kelly controller come with the usb cable?
do you know how to determine whether a motor's hall sensors are 60 degree or 120 degree?
Either I look for the specs on the motor, or take a look at the motor's stator and measure out the hall angles. If anything I also just try one or the other.
@@diye-bikeswithjonny5398 sounds good thanks
@@evanseki2470 no worries!
Have you ever wired this controller to a MY1020 style motor? If so is your color diagram the same?
In the description you said it’s a square wave, but on the website it claims to be a sine. Did you get the 48v or 72v? I’m thinking of getting the 72v and curious if I can program the Voltage cutt off down to 48v
Yes you can
Hi, I also have the same controller as you.
I connected everything the same as you but it doesn’t work.
It shows me a continuous red light.
Can you help me ?
What type of motor do you have ?
Have you got it sorted yet ?
@@herenow2895 hello, i have connected an anritzet Motor and now it works.
@@Alex-hp4xu - Good news :)
I have the same problem, red light just blinks. Could help me out also
When I connect hall color to color it run reverse.
i have a green light but either no power or no signal is going to my motor it wont spin
Put a quarter coin in the coin slot it'll work 👀