Another art of ladder craftsmanship that will attract your attention ..! 👇👇👇👇 👉 ua-cam.com/video/7zglzs_OEYM/v-deo.html 👈 İlginizi çekecek başka bir merdiven çalışması..! 👇👇👇👇 👉 ua-cam.com/video/7zglzs_OEYM/v-deo.html 👈
Один раз видел, как таких же мастеров материл заказчик. Только они фасад таким же макаром делали. Выставляли мраморные плиты, всё на проволочках каких-то, потом заливали в щель раствор, типо с полимерной добавкой. По такой же технологии делали набережную. Там каждый год латают местами уже несколько лет. Потихоньку отваливается. Самое интересное, что у этих ребят работы валом, их из города в город перевозят. Сам пробовал тендер у них выиграть, они цену снижают в ноль. Ещё и скорость обещают бешеную. Понятно дело, что ступени нужно сначала залить, потом на клей под гребёнку укладывать. А тут как прошлый век. Жесть просто.
Bizim mütehaid "-benim vereceğim para belli mermer değil istersen toprak koy " diyor..yeterki ucuz olsun..bergamnın en ucuzcu müteahidinin lafıdır bu... eke bi sen bakıyorsun😎
Es un excelente trabajo .!! Muy bueno. ...ahora disculpe mi ignorancia, pero a medida que va avanzando y usted se va parando sobre el mismo trabajo que hace, no va a suceder que quede mal pegado y pierda la ubicación correcta de los escalones..¿? Saludos desde Argentina.
Unbelievable what a master you are, I am soooo happy with the internet and youtube otherwise I would never have been able to see your work. Thank you for sharing! 👍👍👍
Все посмотрели, теперь запомните, никогда так не делайте,всё отвалится на фиг, и случится это как раз тогда когда ремонт будет завершён.... А вооот потом думайте как это переделать с чистовыми стенами и мебелью... 😁
I wonder how a regular sand mix will bond together with the marble... in my country we only use tile mortar and even with that we have to back butter the tile for better bond... I don’t think this will stand for very long
Como marmolista te digo que tardarán poco en empezar a despegarse los peldaños,ya que si no los untas por detrás con cemento no pegaran y se irán soltando poco a poco.
I must tell you, for brazilians this way of "glueing" tiles on concrete is kind of shocking for us. We would never do like this. We have sand, minerals powder too, but for setting tiles and other stones we use a different material, just one powder and water.. is more thinner, clean, and far more trustable.
@@blusky109 honestly i don't know the name in english, cause here we call it "argamassa" but this is also a portuguese word for when you mixture cement with water and other elements. I would say it is a special kind of cement, very thin powder. We get those in 20kg bags. There's also a classification like: ACI, ACII, ACIII where the ACIII is the most expensive and also the highest level of glueing and waterproof, tiles based on porcelain and pure stones are always worked here with argamassa ACIII, and must be used in all humidity areas like bathrooms or kitchens.
Well, same in western Europe, there is a special adesiv for tailes, marbel as well granit. Specially confusing for me is the plain sand he filled in... Never saw that, but I saw a lot of cracked marbel stairs in turkey (Guess now I know why 🤔🤔).
@@huaweimate20litephone38 not sand. it is a mixture of sand and cement. I think it turns into concrete with the water in the concrete they touch on it. In another video, I saw that sand and cement were mixed and water was added after the ground was leveled. I think they prefer it because it is easier and faster. They do it this way here, I go to a lot of buildings because of my job. I didn't see any broken stairs. I translated it with google translate. I hope I wrote it in an understandable way :)
Slikozis diye bir hastalık var.O kestiği taşın tozları yüzünden oluyor.Usta direk kafasına sıkmış.Keşke toz toplama sistemli kesme makinası ve yüksek kalite maske taksaydı!
Мастер делает слишком качественно, даже в ущерб скорости. Ведь можно было бы просто положить плитку на сухую смесь и потом полить сверху водой из шланга! Так обычно и делают, но этот мастер не такой. Он даже для верности ходит по ступенькам, пока цемент ещё не засох: если не уплывёт сразу, то потом прочность станет только выше. А как он подбирает рисунок камня, когда делает ступень из кусочков! Те, кто пишет, что углы кривые, зазоры, ступени разные - они просто не понимают ничего в лестницах. Здесь выверены все пропорции, учтён размер ноги хозяина дома, и что самое поразительное - мастер держит всё это в голове, а ведь не каждый сможет обойтись без этих новомодных компьютерных чертежей.
The finish job looks ok. His cuts are decent. He will probably die from silicosis from dry cutting all that stone but that's another story. The problem is that there is nothing bonding the tile to the concrete. He is just piling up cement on the stairs and dropping the tile onto it. Cement does not bond to the tile whatsoever, thinset should be applied to the concrete and the tile to bond it to the stairs. I don't understand why you would go through all of that trouble to build that staircase and not use thinset. It would cost maybe a $100 for the whole staircase and it would last forever. The way it is laid now you could pop that whole staircase off with a trowel easily and it will fail guaranteed. I also don't understand why you would post a video of this shoddy workmanship for everyone to see. Third world construction.
@@vaccumme Portland is not meant to be used as an adhesive. At the very least he could butter the backs of the risers and the treads with a Portland wet mix but he is not even doing that. He is just piling the cement up behind the riser without even troweling any cement on it first. Installing it this way will not bond the stone to the cement behind/underneath it at all. I fix jobs like this all of the time. I guarantee once it's dry I could walk up to it with a margin trowel and pop off the entire staircase in a few minutes. The said part is that to make the staircase strong would require a small amount of extra work and money. Either they don't know any better or they just don't care. They are certainly not flooring masters. More like flooring disasters.
@@markadler8968 Sir. Thank you for the in-depth reply. I noticed that he did not tamp the base material down. I'm just a DYI Home owner. I have Tiled small areas of my home. I used Quick Set Mortar from USG. I had to remove a broken tile and was surprised that I had to Chisel the Tile out. Ted.
@@markadler8968 One more item: A Man named Mike Haddock has a # of Videos about Masory. I may be wrong, but I think he uses Portland Cement for many Jobs ?
Читаю некоторые комментарии и понимаю, что основная масса людей очень далека от этого. Всех смущает монтаж методом сухого раствора, хотя это давольно распространённый способ при большом клеевом слое при монтаже гранита, это в основном уличный метод. Но никто не обращает внимание на халатность при установке. Швы с палец, ступени завалены, свес не выдержан, "мастер" даже это не проверяет.
Hiç olmaz ustacım hem akıntıyı kaçırmış ustam sağ taraflarından rıhların altı açık kalmış bu yüzden hep hemde yelpaze basamaklar esteden kesmek yerine plakadan kesilse daha güzel olurmuş emprador taşının da plakası bulması zor bir mermer değil
При ходьбе по такой лестнице идёт вибрация и резонанс. А он кладёт на цементнопесчаный раствор. Мало того он засыпает песком пустоты а сверху 2см раствора. Такого я не видел ещё,
Elinize sağlık güzel olmuş. Ben merdiven ustası değilim ancak bizim buralarda merdiven harcını döşeme harcı gibi kuru yapıyorlar.Sonra üzerine cimentolu şerbet döküp üzerine taşı koyuyorlar. Hangisi doğru anlayamadım
What happened to the reinforcement? That staircase looked completely dilapidated before ,,,And why should these poor people always have such expensive material choices. I do not understand. Had not been enough with cement. polish it. It's going to be fantastic
it's good practice yes. but this guy is not going to live there, he just need the job done asap, and this way is much easier, so why bother. this is how we roll in turkey, as long as it looks alright, it's good enough.
@@VgniK88 its a comon technic but he is dooing some shit in there he use well do wet motar and he tries to dry him with sand and some other stuff so he kann better walk on the work but that is not good becouse the dry areas are drying the motar to fast so the binding is interupted also he walks on the wrong side of the tops that work will fall apart very fast and become loose of the ground
Another art of ladder craftsmanship that will attract your attention ..! 👇👇👇👇
👉 ua-cam.com/video/7zglzs_OEYM/v-deo.html 👈
İlginizi çekecek başka bir merdiven çalışması..! 👇👇👇👇
👉 ua-cam.com/video/7zglzs_OEYM/v-deo.html 👈
O kırmızı ışıklar ne işe yarar onu deyin hele usta ?
@@fikretozkaya1538 l
seyyar olanlar ladder ,, bildigimiz beton merdivenler { Stairs }
I oops 88q8o6p 9 us
🇹🇷🐝 Ərdoğan 💩💩💩💩💩💩💩
первый раз вижу , опалубку из мрамора )))
Я сам гранитом занимаюсь, за такую работу меня бы убили на месте 🤣🤣🤣
у меня еще сомнения на cчет прочности лестницы под таким весом
Значит ты дилетант. Это давольно распространённый спросом монтажа гранита, особенно на улице...
@@alexgoroff6720 если он дилетант, то кто тогда ты - это, вообще-то мрамор!!!
@@МихаилБалашов-ч2ы 😁😁😁😁Угораю с подобных комментов, как у него)))))
Один раз видел, как таких же мастеров материл заказчик. Только они фасад таким же макаром делали. Выставляли мраморные плиты, всё на проволочках каких-то, потом заливали в щель раствор, типо с полимерной добавкой. По такой же технологии делали набережную. Там каждый год латают местами уже несколько лет. Потихоньку отваливается. Самое интересное, что у этих ребят работы валом, их из города в город перевозят. Сам пробовал тендер у них выиграть, они цену снижают в ноль. Ещё и скорость обещают бешеную. Понятно дело, что ступени нужно сначала залить, потом на клей под гребёнку укладывать. А тут как прошлый век. Жесть просто.
Ustaya lafım yok eline sağlık lakin bizde döner basamak a ek yapılmaz şablon çıkartılır
Неправильный перевод.
yapilirsa ne olur?
@@ergunpercin5249 kötü gözükür iyi yapıştırmak lazım ek olsada
@@ergunpercin5249 duzgun oturmaz yapisie 3 ay sonra acilir adam para vermis tek parca ister ben musteri olsam kabul etmem
Bizim mütehaid "-benim vereceğim para belli mermer değil istersen toprak koy " diyor..yeterki ucuz olsun..bergamnın en ucuzcu müteahidinin lafıdır bu... eke bi sen bakıyorsun😎
Я хочу промыть глаза после увиденного. И ведь не стесняются, выкладывают такое видео.
Ага
Я тоже в ахере
Оцко своё промой для начала, вонять меньше будет.
@@ККе-с4ж airlines vayg
@@ККе-с4ж А ты меньше нюхай чужие очки 😂😂😂
Боже упаси нарваться на такого мастера
Сижу, смотрю и размышляю о судьбе этой лестницы. И тут Ваш комментарий.
Это не лестница это залепуха
Зато быстро
Потому что они знает своё дело и работают.
Согласен , дичь полная
Страна где придумали Голивуд в восторге за зрелищность, страна в которой придумали АК-47 в шоке из-за качества конечного изделия.
Нормас, уровнем стрельнул, выровнял, потом встал, начал другую делать 😂😂😂🤦♂️👍
Wow nice video 👍
very good work sir respect from Pakistan 🇵🇰
Muy bueno amigo Dios lo bendiga por la creatividad que le dio saludos desde Peru 🇵🇪
Es un excelente trabajo .!!
Muy bueno.
...ahora disculpe mi ignorancia, pero a medida que va avanzando y usted se va parando sobre el mismo trabajo que hace, no va a suceder que quede mal pegado y pierda la ubicación correcta de los escalones..¿?
Saludos desde Argentina.
Unbelievable what a master you are, I am soooo happy with the internet and youtube otherwise I would never have been able to see your work. Thank you for sharing! 👍👍👍
Sarcasm?)
ابداع واحتراف انا نفس الصنف في مجال العمل انت الافضل
Great work mate - a pleasure to watch your skills.
Тут похоже только русские понимают, что эта "работа" шлак полный))
Тяп-ляп аля Узбекистан.
@@Р.А-ш8е по себе не суди
Abi merdivenler çok dar nasıl eş ya çıkar eve yanlız ustanın eline emeğine sağlık mükemmel oluyo
Doner basamakların iki parça olduğunu ilk defa görüyorum biz ek parca şablon çıkartırız elinize saglik
Sende cek bi video... Konusmasi kolay 😉
Все посмотрели, теперь запомните, никогда так не делайте,всё отвалится на фиг, и случится это как раз тогда когда ремонт будет завершён.... А вооот потом думайте как это переделать с чистовыми стенами и мебелью... 😁
Согласен на 1000%
думаешm забухтит?
@@Zornstern не то что забухтит , через пол года весь лестничный марш будет как до укладки гранита
хрен с ним отвалится - там минимум 3 перелома в первый месяц эксплуатации
تسلم ايدك انت معلم😃😃😃😃😃
Thats nuts. Total hustler. Good helper
I wonder how a regular sand mix will bond together with the marble... in my country we only use tile mortar and even with that we have to back butter the tile for better bond... I don’t think this will stand for very long
Muito bom... Sou Azulejista aqui no Brasil e gosto muito de Aprender técnicas novas
Выровнял, наступил. )))
Como marmolista te digo que tardarán poco en empezar a despegarse los peldaños,ya que si no los untas por detrás con cemento no pegaran y se irán soltando poco a poco.
Concordo com vc, além disso ainda pisar nas peças recém colocadas com certeza vai dar defeito
Машаллах брат, четко быстро профессионально, никого не слушай нечего там не уплывёт) все четко
الله يبارك فيك......وجزاك الله كل خير على هذا العمل الرائع
Qkfk
جزاك الله خير يا أخي
Saludos desde veracruz Mexico... doing a great job
May God give you well-being. The best job I have seen for nine years is frowning
I must tell you, for brazilians this way of "glueing" tiles on concrete is kind of shocking for us.
We would never do like this.
We have sand, minerals powder too, but for setting tiles and other stones we use a different material, just one powder and water.. is more thinner, clean, and far more trustable.
What’s the name of powder ?
@@blusky109 honestly i don't know the name in english, cause here we call it "argamassa" but this is also a portuguese word for when you mixture cement with water and other elements. I would say it is a special kind of cement, very thin powder. We get those in 20kg bags. There's also a classification like: ACI, ACII, ACIII where the ACIII is the most expensive and also the highest level of glueing and waterproof, tiles based on porcelain and pure stones are always worked here with argamassa ACIII, and must be used in all humidity areas like bathrooms or kitchens.
@@AlexUnder_BR Thank you for the info ! I appreciate.
Well, same in western Europe, there is a special adesiv for tailes, marbel as well granit. Specially confusing for me is the plain sand he filled in... Never saw that, but I saw a lot of cracked marbel stairs in turkey (Guess now I know why 🤔🤔).
@@huaweimate20litephone38 not sand. it is a mixture of sand and cement. I think it turns into concrete with the water in the concrete they touch on it. In another video, I saw that sand and cement were mixed and water was added after the ground was leveled. I think they prefer it because it is easier and faster. They do it this way here, I go to a lot of buildings because of my job. I didn't see any broken stairs. I translated it with google translate. I hope I wrote it in an understandable way :)
Impressive, but I probably would have started at the top and worked down as to avoid stepping on the unset tiles.
Good working dear
Slikozis diye bir hastalık var.O kestiği taşın tozları yüzünden oluyor.Usta direk kafasına sıkmış.Keşke toz toplama sistemli kesme makinası ve yüksek kalite maske taksaydı!
Yurdum insanı ne zaman KKD kullanmış ki
@@unitedcolorsofmydick cahillik işte
Gaz maskesi kullansa yeterli olur mu?
Great and beautiful work, greetings from Egypt
Good work, thank you and good luck
대단해요!!! 대리석에 무게가 엄청나게 무거워요!!! 쥐통및 믹서기 작업은 잘해야 호흡맞쳐서 일해야되요 안그려면은 허리에 무리가 가요 몸건강하세요 힘내세요
Good job my friend!!
ill never ask people to wear a mask, but when your cutting those marble pieces please put a mask on :D your work is great by the way
Good job👌👏👏👏👍🏻
Very nice workmanship !
Allah razı olsun, Allah helal lokma almak için bu emekleyen elleri sever.
Мастер делает слишком качественно, даже в ущерб скорости. Ведь можно было бы просто положить плитку на сухую смесь и потом полить сверху водой из шланга! Так обычно и делают, но этот мастер не такой. Он даже для верности ходит по ступенькам, пока цемент ещё не засох: если не уплывёт сразу, то потом прочность станет только выше. А как он подбирает рисунок камня, когда делает ступень из кусочков! Те, кто пишет, что углы кривые, зазоры, ступени разные - они просто не понимают ничего в лестницах. Здесь выверены все пропорции, учтён размер ноги хозяина дома, и что самое поразительное - мастер держит всё это в голове, а ведь не каждый сможет обойтись без этих новомодных компьютерных чертежей.
Молодец мужик 👍👍👍☝️☝️☝️☝️☝️👍👍👍👍👍👍
Se você gosta de perfeição e não pode paga pra um profissional como esse, não começa nada
Yes
The finish job looks ok. His cuts are decent. He will probably die from silicosis from dry cutting all that stone but that's another story. The problem is that there is nothing bonding the tile to the concrete. He is just piling up cement on the stairs and dropping the tile onto it. Cement does not bond to the tile whatsoever, thinset should be applied to the concrete and the tile to bond it to the stairs. I don't understand why you would go through all of that trouble to build that staircase and not use thinset. It would cost maybe a $100 for the whole staircase and it would last forever. The way it is laid now you could pop that whole staircase off with a trowel easily and it will fail guaranteed. I also don't understand why you would post a video of this shoddy workmanship for everyone to see. Third world construction.
I think you are right
Are you sure that won't work ? ? That looks like Portland Cement with some fine aggregate.
@@vaccumme Portland is not meant to be used as an adhesive. At the very least he could butter the backs of the risers and the treads with a Portland wet mix but he is not even doing that. He is just piling the cement up behind the riser without even troweling any cement on it first. Installing it this way will not bond the stone to the cement behind/underneath it at all. I fix jobs like this all of the time. I guarantee once it's dry I could walk up to it with a margin trowel and pop off the entire staircase in a few minutes.
The said part is that to make the staircase strong would require a small amount of extra work and money. Either they don't know any better or they just don't care. They are certainly not flooring masters. More like flooring disasters.
@@markadler8968 Sir. Thank you for the in-depth reply. I noticed that he did not tamp the base material down. I'm just a DYI Home owner. I have Tiled small areas of my home. I used Quick Set Mortar from USG. I had to remove a broken tile and was surprised that I had to Chisel the Tile out. Ted.
@@markadler8968 One more item: A Man named Mike Haddock has a # of Videos about Masory. I may be wrong, but I think he uses Portland Cement for many Jobs ?
Good job amezing
Çiçek gibi işçilik
Good work sir exilent
صار سنين لم ارى مثل هذا العمل المتقن والجميل
Тяп ляп и готово!)
Читаю некоторые комментарии и понимаю, что основная масса людей очень далека от этого. Всех смущает монтаж методом сухого раствора, хотя это давольно распространённый способ при большом клеевом слое при монтаже гранита, это в основном уличный метод. Но никто не обращает внимание на халатность при установке. Швы с палец, ступени завалены, свес не выдержан, "мастер" даже это не проверяет.
really enjoyed- voice from Pakistan
Excellent work my man true pro. My words as a mexican cant explain it. So i am sorry but u do great work
Eline saglik ustam ,gaziantep
Very good job. I understand the reactionn of this guy about the slippery stair..
Good job amezing very good
Toz cimonto kullan sıvı harçla terazisini ayarlaman daha zor olur ve de oynar
Usta yorumdan belli oluyor. Saygılar.
15 yıldır mermer basamak yaparım gözlerim kanadı videoyu izlerken
Cara pemasangan granit keramik tangga bagus dan rapi
Excellent trades man amazing job
Good design 👍
No....just no !
Whoever said good job,deserves to be ripped off by crappy workers .
How does he walk on the tile he just placed down? Wouldn't the tile sink down because his weight is on it? Especially with such a wet mix?
Taze basamaga basıyor çökme yapmiyormu? Ondan sonra burun mermer nasıl tutuyor yapıştırıcı yok sadece arasına harç koyuyor
Usta eline sağlık güzel olmuş meslek taşım
A spoon of water on this granite/marble at night time.. is a death trap.... Good work by the tradesman though
Que buen trabajo aunque me hubiera gustado verlo todo terminado.....
Dangerous stairs! On the left You need min. 10 cm (4") when you go downstairs.
This is Turkey, everything is Dangerous! This is the least Dangerous thing
helal olsun ustam sanatını konuşturmuşsun...
Hiç olmaz ustacım hem akıntıyı kaçırmış ustam sağ taraflarından rıhların altı açık kalmış bu yüzden hep hemde yelpaze basamaklar esteden kesmek yerine plakadan kesilse daha güzel olurmuş emprador taşının da plakası bulması zor bir mermer değil
При ходьбе по такой лестнице идёт вибрация и резонанс. А он кладёт на цементнопесчаный раствор. Мало того он засыпает песком пустоты а сверху 2см раствора. Такого я не видел ещё,
ето не толко песок ,а сухой разтвор, цемент и песок
Учитесь как надо бабки зарабатывать, - раз, два, тяп, ляп, готово ! А я тут неделю с одним маршем мудохаюсь ...
Pracowity Człowiek.....Brawo
They've all sunk tho ? As he's walking on them look at the gaps between tread and riser
Yes, but it matches their brickwork. Sooo.
Zanaatkar bir ustaymış
Elinize sağlık güzel olmuş. Ben merdiven ustası değilim ancak bizim buralarda merdiven harcını döşeme harcı gibi kuru yapıyorlar.Sonra üzerine cimentolu şerbet döküp üzerine taşı koyuyorlar. Hangisi doğru anlayamadım
Faccio scale di marmo e granito da 40 anni, se consegno una scala con delle pedate in due pezzi il cliente mi strozza !!!!
absamak mermerlerini 3 cm kullanıyolar genelde gereksiz mi_?
What happened to the reinforcement? That staircase looked completely dilapidated before ,,,And why should these poor people always have such expensive material choices. I do not understand. Had not been enough with cement. polish it. It's going to be fantastic
Marble in turkey is not too expensive
"Öğretmen" bu tür zararlı toza karşı maske takmıyor. "Usta" adımları basit betonla doldurur, özel bir yapıştırıcı kullanmaz.
عندي 100متر مربع دال دوسول خدمة فن و اخلاق و اتقان جزائري يحترمك و يدعوا لك بالرزق الحلال و الى الدين الحنيف
Was von matrial benutzt? Beton strish?
Odar kelebe
Bu ne emek ne çalışma yav. Zor iş abi , para kazandığına değiyor mu? Ustanın ömründen ömür alır.
Bu sadece basamak mermer işinde ne taşlar kaldırılıyor bir bilsen kardeş dersin buralarda seyit onbaşı kaynıyor. 🤣🤣🤣
Very good .thank you information 👍👍
Svaka cast!!!
Tam iş bitmediki özellikle iç tarafta kalan bölümün (yani merdiven kıvrımının içte kalan ayak basılamayan yerin bitişi nasıl çok merak ettim??
Eline sağlık
Mermer merdivenin Şimdiki hali merak konusu !, 5 santimetre de doldurulabiliyormuş! :-)
А подступёнок на растворе весит а не на ступень опирается это технология такая?
Good job 👏👏👏
هذا بناء الخلود او ماذا
Wouldn’t u start from the top? After setting the level down the bottom, so u weren’t walking on it before drying?
it's good practice yes. but this guy is not going to live there, he just need the job done asap, and this way is much easier, so why bother. this is how we roll in turkey, as long as it looks alright, it's good enough.
@@berkrullah yea fair enough, nice looking job
@@VgniK88 its a comon technic but he is dooing some shit in there he use well do wet motar and he tries to dry him with sand and some other stuff so he kann better walk on the work
but that is not good becouse the dry areas are drying the motar to fast so the binding is interupted also he walks on the wrong side of the tops
that work will fall apart very fast and become loose of the ground
Tebrikler ustam
Şablonsuz ekle yapılan mermeri görünce gözlerim kanadı. Onun dışında sorun yok 😅
azul fellwen verry good its amazing job avud iguerzen .thanmirth nwen .
İşciligin boş merdivene parca nerde görülmüş ???
تسلم ايديك يامعلم
"Слушай ты, если ты мне, Церетели, такой же камин сделал, как ванну, - я тебя в ванной не утопил, я тебя в камине точно сожгу."
Eline sağlık Ustam
Excelente trabajo sr felicidades saludos de peru
Молодцы, ребята, турки!!! Чох гюзаль!