Hi I looked into it and it is a proprietary tool. I was able to locate it, but it is only available in kits. www.toolwarehouse.com.cy/product/turnbuckle-shock-absorber-top/ If you check ebay, you can find kits upwards of $100. Unfortunately it is the best I can do.
@@AutoCulture773you use a 16mm offset spanner and place it on the nut. Then the top piece of strut pole is exposed, use a 6mm regular spanner to undo the nut. WD40 will also help a little when undoing.
Ich stell mir grad die Frage, warum man ne Lang Nuss 16 mm benutzt, zum Lösen der Mutter und beim zusammenbauen mit einer 14 mm Lang Nuss anzieht das macht doch irgendwie keinen Sinn
We don't have audio on our videos, so that they can be understood in all the countries we support - the illustrations are designed to relay the key points for the replacement job.
where do you find that special slotted 5.2 mm socket?
Hi I looked into it and it is a proprietary tool. I was able to locate it, but it is only available in kits.
www.toolwarehouse.com.cy/product/turnbuckle-shock-absorber-top/
If you check ebay, you can find kits upwards of $100. Unfortunately it is the best I can do.
Can you link both tools to take strut apart?
Instead of this special 5.2mm tool and socket, i have used an "offset spanner" and a 6mm spanner. Worked just fine
How ?
@@AutoCulture773you use a 16mm offset spanner and place it on the nut. Then the top piece of strut pole is exposed, use a 6mm regular spanner to undo the nut. WD40 will also help a little when undoing.
Video como cambiar los delanteros
Why have you use 16mm deep socket to screw the nut out and then 14mm deep socket to screw the nut back in?
What about coil springs?
UKrissy watch my video you will see how to remove the spring
@@MatArmstrongbmx which video? Am I also looking how to remove the coils
@@Lizard6376 ua-cam.com/video/-vDcP-KJYLw/v-deo.html
Perfect 👌🏽
How do you take out the rear springs?
Daniel Suran watch my vid to see how the rear springs are removed 😁
@@MatArmstrongbmx How about a link?
Which special socket goes for audi A6 4f avant 2005, is it the same as on this video for shock absorber disembly (5.2mm and 14mm)¿
Ich stell mir grad die Frage, warum man ne Lang Nuss 16 mm benutzt, zum Lösen der Mutter und beim zusammenbauen mit einer 14 mm Lang Nuss anzieht das macht doch irgendwie keinen Sinn
Wir verwenden standardmäßig eine Mutter aus unserer eigenen Produktion. Das Gewinde bleibt das gleiche und dies hat keinen Einfluss auf die Montage.
1:22 a tool I need but dont have
Thx
wheres the audio?
We don't have audio on our videos, so that they can be understood in all the countries we support - the illustrations are designed to relay the key points for the replacement job.