DIY Jeep Hardtop & Door Storage
Вставка
- Опубліковано 15 жов 2024
- In this video, I will show you how to create a DIY Jeep Hardtop & Door Storage Stand.
I used 1.5" PCV Pipe and a few connecting joints.
The entire parts list can be found on www.adventurede...
My Jeep Build List - amzn.to/2AwJHCc
Camera Used: amzn.to/1Uos4vg
www.adventuredexonline.com
Thanks for watching!!
Follow me on Social Media
Facebook - adventuredex
Twitter - adventuredex
Instagram - adventuredex
![Best DIY Jeep Wrngler Hardtop Lift Hiost [Easy & Cheap]](http://i.ytimg.com/vi/eOU8DQTUcpk/mqdefault.jpg)
Great DIY project! I like that it hold not just the roof but freedom tops and doors!
Yeah, you use the 1.5" PVC it is strong enough to hold them all! Thanks for watching!
Great video Dex, might give this a try . Ballin on a budget isn’t always easy but you make it look easy🤘🏼
Just finished. $73 bucks and about 3 hours (including Home Depot run). Good video. Thanks!
Shelby, what were your measurements in the end? His link doesn't appear to be working. Thanks in advance if you have them!
Nice job on the DIY PVC piped hardtop/door, t-top stand. I would consider adding some low-profile casters to the PVC piped frame assuming the frame is stiff enough
Thanks for the comment! Yes, I actually looked for some but unfortunately they didn't have the right size. That will probably be an upgrade in the future. Thanks for watching!
ive been waiting for you to upload something new for a long time!! dont do this to us!!! dont leave us so long without a new video!!
Thanks for the support! I apologize for not uploading as frequent as I should but am back! Thanks for watching!! #jeepwave
Great vid. Can you please post part list
Nice work... The only thing I would do is add wheels to the frame!
Thanks for the comment! I have been saving up long and hard for them! Soon!
I mean wheels for the hardtop and door storage unit.. They shouldn't be too expensive ;)..
Ohhh yeah! the hardware store that I went to didn't have the right size! I will probably do an update video once there installed! Thanks!
Definitely!
This helped us quite a bit! Thanks man!
Great video love that rack. When you put some wheels in it it will be 100%
Thanks bro! Yeah, am hyped!
any chance you can publish the parts list?
Can you send me the complete list of everything that you used for this hardtop storage rack the link wouldn’t load for me
Nice video man ! I Am going to try and build this with my dad!
Thanks for the comment Isaias! Good luck with your project! Feel free to check out the parts list on my website www.adventuredexonline.com Thanks for watching!
Hey do you have a pic of the stand with the roof, freedom top and doors? From the looks it doesn't seem like the doors would fit comfortably without potential scratching. I like your rig bc it technically all inclusive so my wife and I are looking to maybe do it this weekend. Just want to be sure it would in fact fit everything. Thanks! Good video.
Thanks for the comment Alexander! I haven't had a chance to get the doors off yet because of the rain but it will definitely fit. I had a much smaller stand for my door prior to building this one. It is a fun and easy project that you and your wife could do together! Check out the parts list on my website www.adventuredexonline.com Thanks for watching!
Any exact measurement changes for a 2 door project?
Great video I need to build one of those.
Most definitely! Thanks for watching!
Any chance I could get a part list for this? Website isn’t working for me
Sorry I don’t have it at the moment!
Great video and awesome idea 💡
Thanks a lot!
Great video, nice job man!
Thanks a lot bro! I appreciate the support!
I think I spent $19 dollars building my personal hard top rig. It sits
Thanks for the comment! $19 isn't a bad deal lol but I wanted something very sturdy and could hold everything! Thanks for watching!
How much was
all hardware total?
Awesome stand.
Thanks!!
Great video man! Appreciate it!
There still isn’t a parts list for this the link doesn’t work and I just searched all the comments for one
My Jeep needs a boyfriend like you 😆
Hey Dex hows your bumpers holding up?
Thanks for the comment Brett! I have a new rear bumper with tire carrier video coming out this week! Stay tuned for that! The current bumpers are holding up great but since an upgrading the tires soon, a tire carrier if necessary! Thanks for watching!
How can I get the list?
I do not see the parts list on your website. Can you post it here?
Thanks for the comment Dusty! It will be live on my website tonight! Follow me on IG @adventuredex to stay up to date! Thanks for watching!
I can't find the parts list on your website!
Do you still have the material list ? available , thanks
you should get caster wheels and then you can roll it around
Yah I couldnt find any in the hardware store I went to but that is a good idea! Thanks for watching!
What does luck have to do with it? Just takes a little research
Parts list link is dead
Thanks for the tutorial. Was that Atlantis in Nassau @ 1:16?
Looks like it.
Not a bad video but you should have stated everyting you bought. Not that i couldnt figure it out. you should of also said the lenghts of the pvc tube you cut rather than everyone having to measure. In the future maybe be alittle more informative. Nice try with this one.
Thanks for the comment Brain! The entire parts list is on my website www.adventuredexonline.com, I appreciate your advise. I try to improve every video! Thanks for watching!
What happened to the site?
Under construction, sorry!
For 2 years apparently
This Is Great, Why don't they sell something like this for jeepers.
Thanks, Someone should!
AdventureDex you should consider
Haha yah maybe!!
Thanks man. Love the video and the concept. The link you provided is broken: adventuredexonline.com/Roof_Stand. There is no parts list. Can you maybe provide on here?
Thanks for the positive feedback! I will work on fixing that link!
That link goes to a porn site .... 😑
This is a great idea but definitely not a how to ,the instructions are way off
Feel free to contribute by providing better instructions. Thanks for watching!
Hey Dex, love your videos man, but what's up with the shitty music through this one? Damn man, had to skip most of it just to see the ending!!!
Thanks for the feedback! Videos have drastically improved from this one! Thanks for watching!
1. all 4 doors are not easy to fit under it 2. I really only got 2 doors under it....that's y he doesn't show all four doors in the case bc he knows that it doesn't fit in good. I'm going to make another one with different dimensions...wish me luck...and do another video with the correct sizing!!
Thanks for the comment however I do use this stand for 4 doors and my hardtop. They fit fine. This video wasn't meant to be the be all end all of stands, feel free to make your own and maybe share it with us! thanks for watching!
Hi Tony - can you send me your parts list? I will provide my email upon your reply.
Why was I unsubscribed from your channel
Thanks for subbing! JeepWave 👋🏼