Top merci sur uk6300llb !!!! Même en changeant tous les fils, carte d'alim et carte mère ça ne voulait pas. Le fait d'avoir ajouté un bout de scotch côté droit comme sur la vidéo m'a sauvé ! Merci 🙂
@@Julien-vj4zy j'ai juste collé un bout de scotch (un ruban adhésif) sur les connectiques de la nappe comme sur la vidéo car il doit y avoir un court circuit sur ces connectiques donc faut les désactiver.
I cant believe this worked.. honestly i cannot thank you enough. Ive tried everything past few months, even changed the t con board and i was still getting black screen.. my technician insisted i change the screen but ur fix did it.. i still cannot believe it lol. Although i get two straight lines on the screen and the image is whitish and blurry. Is there anymore thing to be done to get it working perfectly??
@@irishguy200007 i covered some more pins and it was perfect.. my TV was back lol. I've since changed it for a larger screen though.. a Hisense OLED 75inch
Thank you bro shit works i just follwed your video even though i didn't understood the fuck you saying, applied a little piece of tape and i didn't even bothered to count pins and now shit works there is few white lines in the top of the screen but don't give a fuck about it at least now its watchable thank you again for this video ♥️♥️♥️
Thank you so much for what you have done excellently. Due to not understand the language, I wonder Why do you blocked those pins? However, is this repair temporary or permanent?
Most of the time the display panel is driven from two channels or cables connected to it, one cable for each half of the screen, by what's called the "T-con" board. Many times the lines or "blocks" of garbage on the screen is only on one half of it. In this case, you MAY be able to do the pin blocking method and correct it. You want to end up blocking the pin(s) on the cable leading to the side of the screen which is malfunctioning and failing to, or are sending erroneous signals to the display, which is the root of the cause of the lines or "blocks" on the screen. Isolating the faulty connection will eliminate the bad signal and will force the display driver to compensate by sending the correct signal down the other cable, or getting rid of enough of the line(s) so that they aren't very noticeable anymore. Sometimes this method works, and other times it doesn't. It all depends on the type of hardware used and the actual fault of the circuitry inside the TV. It can be time consuming to figure out the right combination of pin(s) that need to be blocked. If the individual pins for ribbon connector sockets on the tcon board are labeled, start with blocking off the clock (clk) signals on that cable and go from there. If the pins are not labeled, you may be able to obtain a schematic online for your particular tcon board, or you can start a process of trial and error, to see which pins might have an effect on the problem. It might end up to be that blocking just one pin takes care of the issue, or it could be a combination of two or more that need to be blocked. Have fun...
Buen día yo soy de México 🇲🇽 y tengo una cn la misma falla solo que ya ni tenia cinta en donde marcaste primero y ya no se ve que me recomiendas conseguir mejor otra tarjeta o si tapo con cinta los otros funcione?
Awesome video, thank you so much! I manage to fix the issue blocking 13 pins. Do you know why this happens? I am wondering if is cable problem, the connection or the tcon itself.
If you find out I would like to know the same thing please. I don't have a clue what he is saying i wish I could but by watching him I fixed mine as well
Это фантастика, но 43UK6400PLF не выдававший до этого картинку на экран, после изоляции 1-15 контакта в шлейфе вдруг заработал! Уважаемый автор, дай пожалуйста объяснения твоим действиям :) Я трижды просмотрел твой ролик но не понял ни слова :) Ты действительно гений!
@@ЯрославКубарь Насколько я понял, изолируя часть контактов на шлейфе, мы отключает неработающий драйвер строк в матрице. Частично его функции берут на себя оставшиеся драйверы. Какие именно контакты нужно изолировать, подбираем экспериментальным путем по качеству картинки.
I Have the 55UK6300plb. Backlight working but no image. when i disconnect the blue (upper) flex cable, i get perfect image on the right side of the screen and a white side on the left side. I've tried multiple hours of taping the lines, but no luck. any suggestions? Should i buy a new mainboard?
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
me too i have one nanocell86 with thin horizontal lines and occasionally flickering. I have tried it, it starts working normally and then creates problems again?!
Hi. I am from Mumbai India. I have a LG tv 49UK6360PTE. 3 years old. My tv is occasionally flickering on the top side of the screen after 1/2 hour some time after 1 hour. I am electrician by profession. I do have some knowledge about electronic. I would like to know which are the pins or how many pins should I block to get perfect pucture. Thanks.
i did this when i had black screen but only fixed half my tv, the other half turns white or black , pls what to do , i tried taping both conectors but no luck tryed all
hola. he conseigudo reparar mi tv lg con el mismo fallo, pero ahora en el lado que he puesto la cinta, obtengo unas lineas horizontales que apenas se notan, y solo se aprecian en ciertos colores o cambios de imagen, he tapado del conector derecho desde la derecha, pero como puedo saber cuantos pines exactos tengo que tapar, solo ir provando no?
Bang mau bertanya. Saya ketemu tv dengan model yang sama, kerusakan gambar setiap berapa detik bergoyang dan setelah saya isolasi bagian kiri fleksibel (1) gambar normal. Setelah sekitar 5 menit di coba tiba" blank dan setelah saya periksa ternyata fleksibel bagian kanan warna merah jalur nya yang bermasalah. Kalau saya isolasi ke duanya pasti gak ada gambar, kalau hanya bagian fleksibel merah gambar kembali ke keruskaan awal bergoyang. Gimana solusinya ya.??
he gave you a guide .. apply it in actual .. study it.. there are a lot of ckv signals in it... every trouble difers .. so stop whinning and thank these guy instead... 🤣🤣🤣🤣🤣
Hello beautiful man. Maybe you've seen the problem I'm facing. I have an LG 55UK6200PLA and my left side of the TV screen shows fine, but the right side shows a darker picture exactly in the middle (the backlight works well), but the screen is divided into two parts, one is bright and the other is darker. ☹️☹️☹️
Can’t thank you enough, saved my 2 years old 65” TV, they asked me £120 to fix it and about to do it but I fixed it myself in 20 mins instead. Thanks
Is it still running fine?
Not sure I understood what he did. Can you elaborate?
A whole replacement tcon board, which is the proper way to repair this issue, is usually under $25.
@@davelowets bullshit
napaka effective nito ginawa ko sa tv namin na LG 43" Ai ThinQ 4K UHD gumana talaga sa unang try lng, very useful tong tutorial na to👏👏👏
aNONG GINAWA MO KC PO SIR NAG BLACK SCREEN
..i taped over 14 or 15 pins ..on the side like in the video. It works. Man, you are a genius. Thanks a lot.
Thanks you 😊
J'ai pu réparer ma TV 55" de 4ans . Ça fonctionne incroyable . merci
Nice video bro I solve my lg tv through your video. So great man
Thank you so much. I repared my LG tv 43inch done. My case is left cable broken.
Merci pour cette superbe vidéo j'ai pu réparer ma télé sans problème 👍
Top merci sur uk6300llb !!!! Même en changeant tous les fils, carte d'alim et carte mère ça ne voulait pas.
Le fait d'avoir ajouté un bout de scotch côté droit comme sur la vidéo m'a sauvé !
Merci 🙂
Bonjour quel était vos symptômes svp ?
@@Julien-vj4zy bonjour, j'avais écran noir.
J'avais du son
J'ai exactement le même problème, je penser que sa venait de mes LEDs mes elle sont toutes fonctionnels. Qu'avez vous fait exactement svp ??
@@Julien-vj4zy j'ai juste collé un bout de scotch (un ruban adhésif) sur les connectiques de la nappe comme sur la vidéo car il doit y avoir un court circuit sur ces connectiques donc faut les désactiver.
@@mikeexa3525 je peux mettre du scotch normal transparent ?
Thank you so much! I've fixed my 55UK6340PTF
ame unit but not working on my tv
Thanks a lot brother it worked highly appreciate you for sharing this ....
It works! 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻 Thank you for sharing!
wow, thanks 10000000000 times bro, i"m saving 150USD
Thank you so much 👍 now it's fixed..
tank you so much for your video..i fixed my t.v
I cant believe this worked.. honestly i cannot thank you enough. Ive tried everything past few months, even changed the t con board and i was still getting black screen.. my technician insisted i change the screen but ur fix did it.. i still cannot believe it lol.
Although i get two straight lines on the screen and the image is whitish and blurry. Is there anymore thing to be done to get it working perfectly??
So it degraded your picture?
@@irishguy200007 i covered some more pins and it was perfect.. my TV was back lol.
I've since changed it for a larger screen though.. a Hisense OLED 75inch
75 inch seriously?
Now I'm getting jealous
Imagine taking out that led to do a backlight repair.
@@irishguy200007 lmao pls don't wish me bad luck lol.. anything happens to it .. the repair guy is coming to me
That wont be a pretty sight.. 75 inch is a massive screen size its a WALL literally@@irishguy200007
Thankyou! Work for my 43uk6300mlb model!
What did you do?
@@livio83333 Just followed the video.
Faire une copie d ecran moi j'ai compté 16 pin et mon téléviseur fonctionne merci pour la vidéo
Don't take this bad bro, UA-cam is the international tool , so English is the best way to relay your messages.
Thank you bro shit works i just follwed your video even though i didn't understood the fuck you saying, applied a little piece of tape and i didn't even bothered to count pins and now shit works there is few white lines in the top of the screen but don't give a fuck about it at least now its watchable thank you again for this video ♥️♥️♥️
Thank you so much for what you have done excellently.
Due to not understand the language, I wonder Why do you blocked those pins?
However, is this repair temporary or permanent?
Most of the time the display panel is driven from two channels or cables connected to it, one cable for each half of the screen, by what's called the "T-con" board. Many times the lines or "blocks" of garbage on the screen is only on one half of it. In this case, you MAY be able to do the pin blocking method and correct it. You want to end up blocking the pin(s) on the cable leading to the side of the screen which is malfunctioning and failing to, or are sending erroneous signals to the display, which is the root of the cause of the lines or "blocks" on the screen. Isolating the faulty connection will eliminate the bad signal and will force the display driver to compensate by sending the correct signal down the other cable, or getting rid of enough of the line(s) so that they aren't very noticeable anymore. Sometimes this method works, and other times it doesn't. It all depends on the type of hardware used and the actual fault of the circuitry inside the TV. It can be time consuming to figure out the right combination of pin(s) that need to be blocked. If the individual pins for ribbon connector sockets on the tcon board are labeled, start with blocking off the clock (clk) signals on that cable and go from there. If the pins are not labeled, you may be able to obtain a schematic online for your particular tcon board, or you can start a process of trial and error, to see which pins might have an effect on the problem. It might end up to be that blocking just one pin takes care of the issue, or it could be a combination of two or more that need to be blocked. Have fun...
Hello, great video you've made there. But I realized after taping the T-con the tv display quality has reduce.
Any help on that?
Fun?
Does the final result degrade the picture quality?
Не надо ничего заклеивать, просто распушите шлейф, из за того что все цепи наводят друг на друга сигнал то нарушается синхронизация
Thank you so much 🙏🏼🙏🏼!!!!
Thx a lot from France, you saved my 43UM7100PLB and my wallet by the way. Big thanks again !
Hi, which pins did you taped?
@@kuban6141 i don't remember sorry :/
@@Daarrz alright, no worries! I hope tv is still working! :)
This really worked, thanks for the video. Does this apply to other brands television also?
thank you, my television is good again, this method works very well.
지금도 작동 잘합니까?
@@고경민-c2u Speak english
@@agusirwanto7483 Is it still working well?
@@고경민-c2u Yessss,,yes it still works fine
@@agusirwanto7483 thank you!!
Buen día yo soy de México 🇲🇽 y tengo una cn la misma falla solo que ya ni tenia cinta en donde marcaste primero y ya no se ve que me recomiendas conseguir mejor otra tarjeta o si tapo con cinta los otros funcione?
Awesome video, thank you so much! I manage to fix the issue blocking 13 pins. Do you know why this happens? I am wondering if is cable problem, the connection or the tcon itself.
If you find out I would like to know the same thing please. I don't have a clue what he is saying i wish I could but by watching him I fixed mine as well
Where is tcon board in this tv?
LG tv 42inch - will please tell me the cut off pins
Did it broke again?
@@buddikaperera2206are you find pind details plz share
thank you very much for your advice everything works fine! Thank you
Thanks, the TV is working again. On the left lane, I blocked pins 1-14 from the right to the left.
LG tv 42inch - will please tell me the cut off pins
Thanks for showing this video
Soalnya kalau 2 fleksibel di isolasi kan gak mungkin bisa.,,,hanya salah satunya baru bisa.
I did that and the flickering has gone but there are still two horizontal lines. Please
help
ទូរទស្សន៍ខ្ញុំខូចអេក្រង់អញ្ចឹងដែរបង បងអាចធ្វើបានទេអស់ប៉ុន្មាន🙏
Это фантастика, но 43UK6400PLF не выдававший до этого картинку на экран, после изоляции 1-15 контакта в шлейфе вдруг заработал! Уважаемый автор, дай пожалуйста объяснения твоим действиям :) Я трижды просмотрел твой ролик но не понял ни слова :)
Ты действительно гений!
Привет, можешь подробней описать спасибо большое
@@ЯрославКубарь Насколько я понял, изолируя часть контактов на шлейфе, мы отключает неработающий драйвер строк в матрице. Частично его функции берут на себя оставшиеся драйверы. Какие именно контакты нужно изолировать, подбираем экспериментальным путем по качеству картинки.
thanks for your ideas
aen ghaen sharki o gharbi ba mashqoq bashanakht ty ghair memory card hy ten k d di jiy ya shukriya g'
Yes thank you very much ! Perfect!!
Ty the best video
How many pun must be Isolated? Can this metode we try on LG 50 inch
I Have the 55UK6300plb. Backlight working but no image. when i disconnect the blue (upper) flex cable, i get perfect image on the right side of the screen and a white side on the left side. I've tried multiple hours of taping the lines, but no luck. any suggestions? Should i buy a new mainboard?
it ok thank u very much
Спасибо очень помог . всего хорошего.
Tengo uno de 49 y hice el proceso con la cinta y eso hizo quemar uno de los cof.😔
How many pins did you block? Thanks
pen k yane k nit k ty bit k ty chokas ki jiy ba tharmi ho jay ga'be tharmi hua hy;mudky sy'
kalau retak sedikit apa masih bisa di servis tv ld lg 49
Thank you so much sir
Hi Friend, first of all congratulations for the video. I wanted to ask you for help: I have a problem with my Samsung LE40B530P7WX TV because it has horizontal stripes. I did several tests but nothing. Could you tell me which are the PINs that I have to block with the tape, I can not understand which is the trace of the signal (VCOM, CLKN, CLKP, CPV, STV, VGM ....) that is causing the problem. A thousand thanks.
me too i have one nanocell86 with thin horizontal lines and occasionally flickering. I have tried it, it starts working normally and then creates problems again?!
Hi just question.
Isn't there a risk of fire if I use a sticker?
Hi.
I am from Mumbai India. I have a LG tv 49UK6360PTE. 3 years old. My tv is occasionally flickering on the top side of the screen after 1/2 hour some time after 1 hour. I am electrician by profession. I do have some knowledge about electronic. I would like to know which are the pins or how many pins should I block to get perfect pucture. Thanks.
THANKS YOU VERY MUCH
❤Thanks
Grazieee❤
Excellent but would the DVB still show on the screen still after this repair?just you went RWY input's
10 sal nami krami ty 20 sal ki ba banda waranty m h
Kalau suda retak sedikit layar apa masih bisa dibetul kan
បើដូរខ្សែរវាតែម្តងបានអត់បង
i did that last year and it worked, however, the flickering has started again. wat do i do?
Thanks sir
Model no. 43uk6780pte.peanal voltage please
i did this when i had black screen but only fixed half my tv, the other half turns white or black , pls what to do , i tried taping both conectors but no luck tryed all
i do the same thing but it not working! pls help me is there other way to fix this?
Can anyone here help to tell me what pin number to block for lg 42lb5820ats. Thanks
Kalau layar retak sedikit apa masih bisa dibetuli bos
hola. he conseigudo reparar mi tv lg con el mismo fallo, pero ahora en el lado que he puesto la cinta, obtengo unas lineas horizontales que apenas se notan, y solo se aprecian en ciertos colores o cambios de imagen, he tapado del conector derecho desde la derecha, pero como puedo saber cuantos pines exactos tengo que tapar, solo ir provando no?
Yep
how many pins to block.
6-8pin
@@restorationtv168 thank you.hope it works.im currently fixing right now.blocking from 13 down to 11 9 and 7 but not work. i try this one you given.
@@javeraguilar8560 wat pin to be block ?
@ restoration tv wat pin to be block ?
Which pin to block pin no
Suppr
kalau udah di putus jalur mati lagi apa masih di sevid
What if the picture of the slowmution?
Please tranlate it in to English.
I cannot understand
👌👌👍
Bravo
wat pin to block?
Bhai is board ki heat sink kaise remove karein please make video on this topic
kalau sudah di putus jalur hidup tapi gebleng lagi gimana servisnya bos
Bang mau bertanya. Saya ketemu tv dengan model yang sama, kerusakan gambar setiap berapa detik bergoyang dan setelah saya isolasi bagian kiri fleksibel (1) gambar normal. Setelah sekitar 5 menit di coba tiba" blank dan setelah saya periksa ternyata fleksibel bagian kanan warna merah jalur nya yang bermasalah. Kalau saya isolasi ke duanya pasti gak ada gambar, kalau hanya bagian fleksibel merah gambar kembali ke keruskaan awal bergoyang. Gimana solusinya ya.??
Нихуя не понятно, но очень интересно, досмотрел до конца
11 september 2001 ki likhat parat hay; 1191 pin code hay
Tqks
Bro please eng sub
Tried this an didnt work. Probably tcon board bad on my unit
Pls video making tamil
lg smart tv nchis 49uk6300pvb freezing image
Can I have english transcription of this?
sorry sir wait nex video(subtiles in setting youtube)
English transactions plz
Why does this trick work
mine isn't working with this fix
Iska scelar nomber kya he
Ora ngartilah bahasane..tp goodlah
I'm not very wise about this video. I see blocked 1-15 pins, but you are writing 6-8.
he gave you a guide .. apply it in actual .. study it.. there are a lot of ckv signals in it... every trouble difers .. so stop whinning and thank these guy instead... 🤣🤣🤣🤣🤣
Pls speak in English
🙏
I tried this and my tv still has no picture
Can anyone answer me, please?
Hello beautiful man. Maybe you've seen the problem I'm facing. I have an LG 55UK6200PLA and my left side of the TV screen shows fine, but the right side shows a darker picture exactly in the middle (the backlight works well), but the screen is divided into two parts, one is bright and the other is darker. ☹️☹️☹️