What Are The Best ebike Motors To Unlock? Bosch, Shimano, Specialized and More Discussed In Detail.
Вставка
- Опубліковано 21 лип 2024
- Learn More At epicebikes.com.au
Unlocks For Bosch
epicebikes.com.au/product-cat...
Unlocks For Specialized
epicebikes.com.au/product-cat...
Unlocks For Shimano
epicebikes.com.au/product-cat...
Unlocks For Giant
epicebikes.com.au/product-cat...
Unlocks For Rocky Mountain
epicebikes.com.au/product-cat...
Unlocks For Fazua
epicebikes.com.au/product-cat...
Unlocks For X35 ebike Motion
epicebikes.com.au/product-cat...
Unlocks For TQ50 Motor
epicebikes.com.au/product-cat...
Unlocks For Ananda Motors
epicebikes.com.au/product-cat...
Timestamps:
0:00 Intro
1:15 Bosch Motors
6:20 Specialized Motors
8:20 Shimano Motors
12:20 Bafang Motors
14:10 Giant Motors
17:10 Rocky Mountain Motors
18:30 Fazua Motors
19:45 X35 ebike Motion System
21:20 TQ50 Motor
22:30 Ananda Motors
23:35 Hub Drives, Cheap Import ebikes
26:25 Our Recomendations
30:25 Warranty & Unlocking Your Bike - Розваги
I think more than having fun, is being safe. 25km/h it's too slow to ride on the street sharing a lane with cars and trucks. I try to avoid riding on the street because at that speed its dangerous, you become an obstacle and some people just dont care about your life. 45km/h for me its a good and safe speed for the rider and the motor
I've been riding Shimano for years and getting my bike unlocked with these guys, and I've never once had an issue. It's so good. I'd never buy a bike I couldn't unlock, and these guys know their Shimano stuff!! Keep it up - you're changing lives for the better, and getting people back out into the great outdoors.
Brilliant. Just the video I need before deciding what Emtb to buy. Thank you for taking the time in making this video and please make more on these topics!
Great video 👍
I installed one of your chips in my e-gravel bike, with the Bosch gen 4 motor, at around 2000km. I recently hit 10,000km and have never had an error code. 90% of my riding is in eco and I NEVER turn the bike off. I let it count down and turn itself off.
I also have two ebikes with the Bafang Ultra motors. Both have aftermarket controllers which bump the max watt output to 2200. Overkill for sure, but a ton of fun.
What chip brand did yo install? And what Bosch system do you have? I'm looking forward to unlock my emtb, I have the performance line CX with the the first kiox. I read most of the problems people have with Bosch is with the smart system.
Great video guys! I have a gen 4 Bosch now and I'm ready to upgrade. I'm considering a Bafang now after watching this!
Fantastic review very informative and light hearted couldn’t agree more with your closing comments e-bikes are helping guys like me get off the couch and enjoy a ride mostly in eco on a tired or lazy day when I prefer to stay home I spoil myself in Trail
Great video thanks guys.
Bafang sounds awesome! 👍
I loved the video - thank you very much
Very informative
If i like a road bike - what would be the fastest road bike
Id be keen to see a review on the fazua ride60 chipped, maybe do an SL edition hit out....
very educational, thank you. I hope someone comes out with a software hack for bosch lol
Very understandable wanting a little more speed. I bought a legally regulated e bike and at 25kph cut off speed I am the slowest rider on my commute into the city. Very frustrating. Just 30kph would be delightful.
Do you have any more information on the Yamaha pw x3 motor ? Or is just the same as the giant unit?
My bosch works like a charm
if you ride in turbo nonstop it will overheat quickly. 2.9kg is just not a lot of mass to absorb 700W for very long. Worse, if mounted in a carbon frame and plastic motor covers, it will have very bad cooling through airflow or the lack of it, and poor heat transfer onto the frame.
Who rides in turbo all the time?
@@beetlebopter888 on climbs, many people ride in turbo all the time. the longer and steeper the climb, the more it will heat up, as the low speed doesn't provide any cooling air.
Hi Guys another great video. I’m looking to de-restrict the tq motor of a Trek fuel exe9.5 and have watch your chip fitting video which made it look extremely straight forward.
One question though not covered in this video is how the motor performs in speed and reliability after chipping.
I ride a mixed surface route in the mid setting on mid power.
Thanks. Keep out putting your great content.
So far there has been no reports of any errors while using the TQ Chips. Given its a low power motor I'd expect about 35-40km/h
I’m in riding my TQ 50 here in the United States. Road Machine BMC. Where can I find someone to put the chip in for me? Thanks
An unlocked Specialized Brose (2022 Turbo Kenevo) can overheat and shred the belt after about 30 min riding flat out with some steep climbs mixed in. Specialized could see the tire size was changed to 800mm in the software, which is out of the range you can change it to in their stock settings, and so they denied my warranty. I sent my motor out and had ebike motor repair install an upgraded belt, upgraded sprag, and upgraded bearings, which was about $900. I also have a 2019 Bosch CX Haibike, and I had no issues riding with it unlocked for a few years.
Do not touch a bosch motor with a rim magnet if you're planning to derestrict. They are the absolute worst and you'll regret it.
Why? Mine works fine, just need to line up the sensor and magnet on pedal
@davidmakaveli4589 you'll be back soon to remove or ammend this, I'm sure.
hazardous method sorry@@davidmakaveli4589
where is continental motor?
Just bought a 2023 Giant Reign E+. It has the SyncDrive Pro (85NM) and is restricted at 32km here in Canada. When you say it can be de-restricted via software how is that done. Bluetooth ? or need to hook some hardware to it? One last question, do you recommend to wait until warranty is done?
It's done via Bluetooth and the dongle shown in this video is required and quite difficult to obtain. Waiting for warranty to be over is personal preference most people that come to us do not.
How did you miss the Pinion electric motor/gears?
We focused on motors that can be unlocked, Given the Pinion is very Niche and currently not available in our location there is no way to unlock this motor at the moment.
Hi. Is the Biktrix Juggernaut Ultra FS Pro 3 unlockable? It has the Bafang M620 - G510 motor.
yes
All bafangs are unlockable. However, don't forget to service them!
For Shimano can you reinstall factory software if you need to claim under a warranty. Also do you do work in the USA?
Yes u can re install factory software. There are no agents availible in america but it can still be done remotely.
What about Yamaha?
How about the Yamaha PW-X motors, is it the same as the Giants?
We have chips for the Yamaha motors, which chip depends on the brand of the bike.
Bosch sounds terrible for unlocking, bricks you and have to change modes to trick it? Sounds dumb.
You talk about road-chip riding as if it's silly and dumb to want to ride at 45kph. I hope you're saying the same things to Tesla drivers.
I didn’t get that message from the video but certainly road bikes have less rolling resistance than any MTB
What does Tesla have to do with noobs riding bikes at speeds they can't control?