Can Mice Beat The Spinning Gauntlet Mouse Trap? Amazing New Design. Mousetrap Monday
Вставка
- Опубліковано 4 лют 2024
- Mousetrap Monday tests A New Mouse Trap Invented By a Viewer
You can purchase My Best Mousetrap -Dizzy Dunker: amzn.to/3Py9eDF
Don’t Use Amazon: You Can Purchase Directly from the Rinne Website: www.rinnecorp.com/?ref=shawnw...
For A List Of My Top Mouse Traps Recommendations Check Out My Online Affiliate Store: www.amazon.com/shop/historich...
This video is NOT sponsored. Some product links are affiliate links which means if you buy something I receive a small commission.
(As an Amazon Associate, I earn from qualifying purchases.)
Watch This Next: • I Invented The Greates...
#mousetrapmonday #shawnwoods
About: the new 3d Printed gauntlet mouse trap is an amazing way to catch mice
That rat was cat sized
amazing the difference between mouse and rat
Packrats are like that.
Shawn's wild mice after being exposed to hundreds of new mouse traps "what fresh hell is this"
How do you think the pet mice think? "Here we go again!"
“I think we’re gonna need a bigger bucket.”
The little mouse fight after the one mouse fell on the other was too adorable.
🐁: AH!
🐀: AH!
then just friends
It may be tricky to make... but if the outside paddles had MORE spinning resistance, it may give the mice more confidence to move to the middle.
Oh smart
just make one of the wings heavier it would provide a gap to make it to the middle and make it seem steady enough to walk across
It would only take 2 extra spacers flanking the outer paddles, and push them close enough to just barely touch; that should provide a little bit of resistance. Best fine-tune the placement though, before deploying the trap~
Probably could just tape a quarter to one of the the outer paddles and that would stabilize them more
I thought about adding a couple fishing weights on one paddle on each end. someone said a quarter. Great idea.
Please please please bring back the lovely little tune at the end🙏👍😎
I 'SECOND' THIS!
My god that rat is humongous
That was a cat in a rat suit.
Final boss mouse!
3:21 CHARLES ENTERTAINMENT CHEESE
Rodent of unusual size
Place a light weight on end one of the "Y- wings" on each paddle. This will make one wing of each paddle point to the bottom and provides a gap in the top part of the "Y". This gives clear view of the bait in the middle. The mice will (should?) balance in the gap and then walk across to the middle "Y"wing. Then gets caught when both paddles spin... Just a guess, though..
That's a good idea!
i agree however i think it should just be the 2 outer ones
I had the same thought. By weighting the paddles, they will "reset" to a position that makes it appear that there is a single, steady platform to walk on. Rather than adding a weight, you could also print one of the paddle legs longer or thicker, so the paddle itself is the extra weight. Also, I'd grease the rod with peanut or sesame oil, for better lubrication, and the scent will act as bait. (Use oil from an Indian or Chinese store, Refined US oils don't smell like anything.)
Is that rat huge or is it just me?
Pretty sure it's a rat :o
@@Vancha112😅 nice
✋ 🐀 🤚
HUGE
Looks bigger than my cat
That rat wanted to eat the mice!
I think you must make a series of catching biggest rats you ever catched
I wonder if there's a way to lock the outside paddles until the center one moves, it could release the others, giving them a false notion that the paddles won't spin
I thought the rat might have fancied a mouse snack
If it actually ate a mouse, that would certainly be edited out because a few viewers would otherwise make a fuss…
The size of that Rat!!!
Could be some cute short cartoon. The huge rat comes in and saves the little deer mice from the trap and takes them out to the countryside himself. Haha
Shawn's pet mice have been through every trap imaginable by now
Maybe dip the paddles in oil. That way, any mouse that touches them can't hold on.
oh no a rat
That thing looked like a giant next to that mouse.
🐀: thanks for the snack
3:21 I did not expect that
Thanks for the video. I love the dizzy dunker, I think it works perfectly.
What a great variation on a spinning trap!
My son and I are loyal fans, and appreciate you very much!
That trap meets godzilla itself
Youtoob is very much like the trap you presented here: They keep moving the floor from under your feet! Let's hope you never fall in the bucket!
i think an improvement is to make one of the wings on the two outer padles heavier to make it seem like its more steady allowing the mouse to reach the middle and then its too late to back out
Another great video!
Good work Crawdaddy.
is the pack rat/wood rat blind in one eye ???
Hey do you think you could give us an update on your special corn breeds on the abandoned second channel if you have spare time this coming growing season? If you still have them around.
i wonder if a little heavy grease on the spindle inside the end spinners would slow it down enough to not scare them, and still break free at the right time.
The Rat with only one eye. It’s a PiRat 🥁 🪘 🎉
😂superb
That rat was HUGE. Compared to your hand. DUDE HOLY FUDGE
If you want to make this better, do the same thing as the double-detent dunk trap where the mouse has to step on the trigger to reach the bait and release the whole plank. In this case, you'd have a rod with weak spring locking the outer paddles in place until the center paddle goes out of alignment, pulls the rod out and releases the whole paddle assembly for a half-turn.
"Version 2" of the "Dizzy Dunker" ?? Haha!
I actually have a couple of ideas...
1) Make the "fins" on the two outside "tumblers" shorter - It will make them more reactive.
2) Make the "fins" on the center "tumbler" slightly longer - making the mice reach further out for the food.
3) Add some small circular holes to the outside of the center tumbler fins to contain the food (PB) so it doesn't slide on the flaps (especially in warm weather).
Always watch the mousetrap videos 👍
gotta have that soft landing, dont want mice breaking their legs from a 20cm drop.
Should you put ramps on both sides?
THAT'S A BIG MAN
THAT RAT BIG ENOUGH TO DRIVE
Thanks Shawn. Rat is looking for a mouse snack
WHO ELSE IS WATCHING SHAWN ON THIS MARVELOUS MONDAY?
Where do you get the cute squeaky mouse toys? I’ve seen them in various other videos.
Been following you for 5 years! Love your videos!
My initial thought was that the outside paddles need to give a false confidence to the mouse. Some people offered some of my early ideas. Something super simple that might work, don’t have any fins on the outside, just a cylinder/straw that spins. It will always seem stable but will spin when the mouse is counting on it.
I need a top ten video please. Top ten times mice outsmarted me.
When you test mousetraps on your pet mice, I wonder if they think you run a mouse amusement park. 🤣
Inspired by the earliest area of Undertale, I thought about stretching some sort of paper over a bucket which will break in the spot a mouse puts his full weight on. The rest of the paper would remain intact.
That was a huge rat! The other one’s smaller.
You tube stopped recommending your channel to me. I realized I hadn't seen a video in a while and now I have a lot of videos to watch. Sorry it has been a struggle for you.
Bro that rat was huge
Was an absolute UNIT
It seems like the rod should be covered by a movable sleeve. Also the spacers should not be a purchase place for tiny feet
paddles stationary then released
by sensor on middle paddle would
do it🐭🐭
Nice
His pet mice should be like a Seal Team with all the Special Forces training they recieve!
If there is a Seal Team Mouse, is there also a Mouse Team Seal?
Anyone else notice that rat was blind in one eye?
FYI...UA-cam isn't recommending me your videos anymore despite having notifications turned on for your channel. Had to manually search to find this video... Pissed off with them because I watch every single one of your videos. I suspect it's the same for everybody because this has way less views than normal.
Mouse trap Mondays are awesome 👍🏼
3:49 what in the hell
I know why he wouldn't do it but make it like my trap and put the rolling log idea I used.
I thought about selling them again.
Where are the files? I have a 3D printer at home and I want to make this!
Need to make it 5 paddles
Adding a comment for the engagement! =D
Shawn, what species was that big rat ?
I think in the past he has said it's a Pack Rat
👍
HELP, I have a problem mole digging up my yard.
Ratzilla. King of the rats. 🐀
Was that a rat or a kangaroo?😅
👍👍
I wonder if having some spinning bushings on the bar between the inside of the bucket and the outer spinners would make it more difficult for the mice to get a grip on the bar once they reach the outer spinner, so they can't go back.
Rat time! Rat time!
I always just use glue traps with baloney in the middle.
i gave it 👍👍
Pet mice PTSD alert. ;-)
by letting the mice go they learn to be carefull and stay away from the trap, no?
I feel like they need to be multicolored.
AN ALASKAN BULL RAT 🤯🤯🤯🤯😱😱🐀🐀
Humongo-rat
Mr Mixer said a Chinese company stole his Amazon product like they did your friend's product.
who else was humming the theme for mission impossible?
Good mouse trap but also a good rat feeder.
Did the rat killed the mouse 🐁
As always Shawn, gloves Shawn, gloves. Protect yourself and your family.
Make it not so freely spinning
These rodents are so cute. Yeah I know they spread disease and eat through stocks, but those whiskers and their long tails and those tiny squek noises 😂
👍🏻😎🇺🇸
Not my specialty, but for every video maybe make a short. YT is trying to compete with TikTok and your videos are perfect for making shorts. I think that might will help your channel.
He’s done that in the past. Was a waste of time and makes a minute amount of $, so he stopped.
@@ByHerHand Yeah, I see that now, but just because shorts does not equal direct dollars, it might promote his channel in the algorithm as youtube clearly wants shots.
Sound is not as good as normal
LOL!!
Like and enjoy 👍🫶👍
Greetings from Germany 👍🫶👍
You need a rat trap.
Cat
Wear plastic gloves
Shawn has a mom already and he is a professional. I am quite sure he washed his hands straight away.