Thanks for taking the time to do this tutorial.Old video, but this may help future viewers: @3:15 you show the flange in place and screws tightened. To get to this point, you have to re-install the spring clip BEFORE tightening the screws.
You are very welcome & we appreciate you watching. Thanks for sharing your info, any & all helpful info is greatly appreciated. Us fellow DIY’ers need to stick together! Hope all is well. 😎👍
Thank you so much! I had the same exact leak. I was upset because I just moved into my first house and this happened. I took a deep breath, watched your video, and fixed it in lass than an hour for $3. You are a life saver!
That is so awesome....you just made my morning with your comment and experience. Im so glad this video helped. Subscribe to the channel if you're up to it. Thanks again for taking a few minutes to watch the video!! We hope your settling into the new house experience is easy from here :-)
Thanks! Plumber quoted me $350 to do this! Then he leaned in and whispered “Please don’t pay me $350 for a 10 minute job that will cost you $2 to do yourself. UA-cam it and do it yourself. It’s easy!”
J S Thanks for watching & we hope you enjoyed the video. That’s pretty nice of him. Hopefully you were able to get the job done. 😀 Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
New Revolution Ventures Awesome and thank you for sharing your comment and experience. So glad the video helped. Please Subscribe to the channel that would be awesome thanks again 😎👍
Awesome video. Had this exact scenario and set up. Your video helped me avoid a costly repair bill from a plumber on short notice. Had this fixed in under an hour counting the trip to home depot. Entire couple kit and putty was only $19! Saved a lot and got it done. Thank you and A+.
TimmyM2000 Glad it helped & saving money in these rough times are key. Well done! Us fellow DIY’ers need to stick together. Many more helpful videos to come. Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
John Packard What’s up John, thanks for watching! You are very welcome! Glad it helped. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for the video! I replaced the gasket first and it still leaked. I had to take it all apart again to do the putty. Next time I'll do it all the first time. Well worth saving the hassle and guesswork.
GerbilKor Awesome Awesome & thanks for watching. The putty makes a big difference. That stuff is magic...🤔 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thank you so much for this...saved us a bunch of money on a plumber and make the fix very easy! Had to make a small purchase to finish up, but total time working on the garbage disposal was less that 20 minutes!
Great job making it a DIY project. Definitely a rewarding and enjoyable experience, not to mention saving money in the process. We appreciate you sharing this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers. toolboxtoken.com Reach out to us any time! 🧰
Mentioning: that ring under the top units, may or may not be the death of you. Or the stress of trying to pop it back on May take you out if not close to it. Either or. 😂😭 Anywho, thank you! Saved mucho monies.
David Pattelena You are very welcome David. After you pick up the plumbers putty and take on this friendly DIY project, definitely keep us posted if you have any questions. Us fellow DIY’ers need to stick together. 😎👍🔧🔩
Hamish Ziegler Thanks for watching! We are happy to hear the video helped. Let us know if you have any additional questions! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! Also, below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. Definitely check those out! 😎👍🔧🔩
Renee Roveal Awesome Awesome thanks for checking out the video Renee. We appreciate you taking the time to reach out to us! We are glad the video helped. Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again 😎👍🔧🔩
Chris Francendese Hey very cool and thanks for checking out the video and sharing your comment Chris! So glad the video helped! Please Subscribe to the channel and turn on your notifications that would be awesome thanks again 😀👍
THANK YOUU! I DID IT! I DISCONNECTED the food disposal, I feel so powerful 😄😄 but this is all thanks to this video. I am half way, but I feel good about doing it 💪
Thanks for watching & sharing this Adriana. Completing your DIY projects are definitely powerful & rewarding. 😁 Keep us posted on your project as you finish the 2nd half.
Very cool & thanks for watching. You will make your friends day if you find there is an issue with his or hers and you fix it. Welcome to the DIY Raptor Club. 😎👍
Hi, question my disposal kerps tripping breaker. I've done the allen wrench twist underneath, broom stick trick and it keeps tripping. It does leak and has leaked for awhile even when it did work. Can the leaking be tripping breaker? Its plugged into a GCI and then powered by a wall switch. Unit is 2 years old. Thanks
Golden Ninja 50 Thanks for watching. The leak may be causing added moisture to the lower fuse which in return, may be triggering the trip. We recommend inspecting all electrical wiring & ensuring all wiring is in good safe working order. You will want to get a new Disposal if it’s leaking at the bottom. Keep us posted. Let us know if you have any questions, us fellow DIY’ers need to stick together. 😀 Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
+Gonzalo Arellano Hey there thats awesome news....thanks for viewing and also for leaving a comment. Im so glad it helped. Subscribe to the channel if you're up to it. :-)
Thanks for sharing! It will help me to know how to properly apply the putty! I hope this solves the issue I had when installing a brand new stored bought disposal that was leaking from the bottom.. any thoughts?
You are very welcome & we appreciate you reaching out to us. Keep us posted on how the putty works. Hopefully it will solve issue. Us DIY’ers need to stick together! Hope all is well. 😎👍🔧🔩
@@DIYwithMichaelBorders thanks! Putty did its proper job!! No leaks from the top. However, I noticed the brand new disposer leaks from the bottom again...
@@DRAGOINTHEHOUSE unfortunately, I had to returned it. It must have been the seal that connects to the PVC pipe or something. The new one that I got, worked pretty well once installed properly. Best wishes!
Michael Baker Very cool. We love hearing experiences like yours, saving money is awesome! That’s too cool! Let us know if you have any questions along the way! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. You may find this PlayList to be very helpful. ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
One of the three screws is rusted shut and will not turn. I was able to turn the housing so the stuck screw is on the outside of the upper housing. Did I hear you say that it could be pried off?
Thanks for watching & welcome to the DIY Raptor Club. You may need to purchase a new flange housing kit to pick up where the old one left off. If interested in purchasing this kit, visit our Amazon affiliate link below. amzn.to/3q8pQlm 😎👍🔧🔩
Tyler Mack You are very welcome & we appreciate you watching. Fixing & completing a DIY project for $2.00 is great. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
Carl Argon Awesome Carl, that’s great news & you are very welcome & we want to thank you for watching & sharing your comment. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome. Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩 ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Silarias Awesome Awesome & thanks for watching Silarias! We appreciate your comment! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! Also below is a link to our Appliance/Home Repair Video PlayList. It contains several helpful videos that you can benefit from including many more videos garbage disposals....definitely check those out! 😎👍🔧🔩 ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Bobby8451 Thanks for watching the video. Let me know how it goes. I remember living in an apartment years ago and we didn't have a garbage disposal. I guess the less you have...the less can go wrong right . Please Subscribe to the channel and turn on your UA-cam notifications that would be awesome 😎👍.
Jay Stoler Awesome! Thanks for watching Jay! Glad the video helped! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! Below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can benefit from including additional Garbage Disposal MX videos. Definitely check those out! ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
John Mal Thanks for watching John, below is a link to our video that shows more on this Disposal. You may find this video helpful. 😀 ua-cam.com/video/kKL_vgwtR60/v-deo.html Let us know if you have any questions, we really enjoy helping out our fellow DIY’ers. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again John! 😎👍🔧🔩
Godfrey Woelk Thanks for checking out the video! We are so glad the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩 Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out! ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Thanks, My garbage disposal seal started leaking with cold weather and I found the three screws on the flange were not tightened at all? Should they be?
Paul Koch Thanks for watching Paul. The ring serves as a support ring & we apologize for not showing it reinstalled. We should have ... now looking back on it. As you remove your brace, pay extra attention to the ring to be better familiarize yourself with how it will go back on. Hope this helps. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
TOMMYHAWK77 Thanks for watching, you are very welcome. Glad it helped. Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Amanda Nicole Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
Nhattuygiaithiensau nguyen Awesome Awesome thanks for checking out the video and sharing your comment. We are glad the video helped! Let us know if you have any additional questions along the way we are here to help! We have lots of videos that you can definitely benefit from. Below is a link to our Appliance/Home Repair Video PlayList...it is filled with “Around the house” repairs....from garbage disposal repairs...washing machine repairs...Smoke detectors...and lots more. Definitely check it out. ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again 😎👍🔧🔩
Something in my disposal broke(while I was using it) and it is gushing water from several places in the bottom when I turn on the water. I have to think it is traveling through the motor compartment. Any ideas? I did fish out some pieces of plastic fork from the top.
brad h Thanks for watching & sharing your experience. Safety 1st, make sure you unplug Disposal from Outlet before moving to next steps. This has happened to us in the past. It made us think that our Disposal was 100% ruined. A few things you can do. 1. With your Disposal off, run water full open & use your Unclogging Disposal tool & try to loosen up object. 2. Try removing object if you can see it. 3. Fill entire sink full of water & then turn on Disposal. This will allow the water pressure to possibly remove object. Let’s start there. Keep us posted. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. That’s no fun. Keep us posted on your project. Congrats on the new house! 😀 Enjoy your night. 😎👍🔧🔩
@@calderonjd30 Thanks for the reply. For our specific system, the instructions state to have faucet open for 24 hours. After 24 hours, close faucet and allow system to pressurize. 😎👍
@@calderonjd30 Awesome. Below is a link to our Reverse Osmosis Playlist. ua-cam.com/play/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov.html It contains several helpful videos on this system. 👍
John rippa What’s up John, thanks for watching! You are very welcome! Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
pastorjosh44 Glad to help & we appreciate you reaching out to us. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Frank Pichardo Thanks for checking out the video and sharing your comment and experience. Once the unit begins to leak from the bottom....it's best to replace the entire unit. You will run into far too many issues once that begins. Keep me posted. Please Subscribe to the channel that would be awesome thanks again 😀👍
Matthew Fesler Thanks for checking out the video Matthew! We are so glad the video helped! Let us know if you have any additional questions along the way, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩 Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out! ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html 😎👍🔧🔩
Robert Bagio Thanks for watching & its best to just replace entire Disposal if it’s leaking from the bottom. Below is a link to our video that shows & talks more about the Disposal brand we like & recommend. Definitely check it out! ua-cam.com/video/4nNa9QBDluQ/v-deo.html Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
very good video, just needed helper to hold camera when removing/resetting snap ring, and when actually removing and replacing disposal. those were my most challenging areas without proper instruction. good job though
Guyzo Thanks for watching & we hope the video helped. We are assuming you’re removing your Dishwasher all together...?? If yes, you can purchase caps for this project to properly & safely seal off the Dishwasher drain hole. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@@DIYwithMichaelBorders no. I don't use the dishwasher ever and the hose wont stay connected in the back of it so im just disconnecting it. thanks for the reply
Suyog Valsangkar Thanks for watching! That’s a good question & it really comes down to where exactly you will be using the tape. As always if the garbage disposal is leaking from the bottom seal it’s basically time to replace the entire unit with a brand new one. There are however friendly places on the Disposal that you can use plumbers tape however we recommend leaning more toward a more secure seal given by hose clamps ... Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩 Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...we cover lots of leaks & repairs. ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
DIY With Michael Borders thanks for the tip I just found out there’s water leaking from the bottom but not from a hole. There are two machine cut incisions at the bottom where the water is coming out from. Thanks for replying so fast great vid btw
DIY With Michael Borders well I probably would and my insurance would cover it but if it can be fixed by removing something clogging up the unit then I would rather do that because this disposer still has about 1-2 years more of service left
Great video - well lit so I can actually know what I'm looking for! I'm off to get the flashlight to get a better look....oh, what a mess down there last night! :-/
The most important part of the re-assembly where the flange at the bottom that is mated to the top part got skip. ( The ring , re-tightening of the bolt, etc.). I can figure it out, but this is suppose to be a detailed instruction so just a little bit to be desired. But, thanks anyway, I can figure it out from here.
Thanks for checking out the video and sharing your comment. Definitely will help our future viewers. You Rock :-0 Please Subscribe to our channel....that would be AWESOME.
Dustin Lassuy Very cool thanks for checking out the video Dustin. Keep me posted and let me know if you have any questions. Please Subscribe to the channel that would be awesome 😀👍
Marc Treiser Thanks for watching Marc. A worn out flange will definitely do it. Us fellow DIY’ers need to stick together. Many more helpful videos to come! Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
jessepoopoo Thanks for watching & we hope the video helped. We unfortunately didn’t touch on wiring in this video. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
Thanks for viewing and commenting. Leaking from the bottom indicates possible symptoms of internal damage to the parts as well as the main plastic shell or case that houses all parts. In the past...leaking from the bottom is signs leading to replacing the entire unit as a whole. After you get the new one installed you will be extremely happy with the new update...you will no longer be poring money into the old unit. Let me know what you do...Subscribe to the channel if you're up to it. Thanks again! 😀
wilson W Thanks for watching. New O-Ring can be purchased from Ace, Lowe’s, or Home Depot. Keep us posted. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀 Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
patthemaniacful You are very welcome & we want to thank you for watching & sharing your comment. Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome. Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩 ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Armando Lopez Thanks for watching & we hope you enjoyed the video. Once your disposal begins leaking from the bottom, it’s best to replace old disposal with a brand new disposal. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Thanks for watching & welcome to the DIY Raptor Club. That’s a tough call...🤔 We always recommend purchasing a new disposal if it’s leaking from bottom. Keep us posted on your project. Below is a link to our video showing our new disposal. ua-cam.com/video/4nNa9QBDluQ/v-deo.html 😎👍🔧🔩
Thanks for checking out the video! What exactly are you experiencing with your unit? If leaks...have you narrowed down the leak point? Subscribe to the channel that would be awesome! Thanks again!
The leak is coming from the pipe connected to the disposal. Started when my washing machine still had water in it after I finished a load. (other words, it didn't drain all the water out of the machine because it was backed up) It might be a clogging issue as well somewhere in the house. I saw the "plumbers putty" in the video and immediately got intimidated. It's funny. There was a plumber next door that very day at my neighbor's. I'm thinking she's having the same problem. Thanks for the help. I've subscribed. =)
_rmaze_ Quiambao 😀 very cool! Is it leaking from the rubber hose or the hard tube below the rubber hose? You might just need to tighten your clamp with a screw driver. Thanks for Subscribing ! 😀👍
Thanks for watching & welcome to the DIY Raptor Club. Let’s get this figured out. You may have a jam. 1st thing to do is unplug garbage disposal and cut all electrical power to the unit. Next, you can use the jamming tool or the proper size hex key to un-jam disposal. Below is a link to our video showing this. ua-cam.com/video/kKL_vgwtR60/v-deo.html Next, check to ensure that your lower breaker is pushed in. Below is a link to our video showing this. ua-cam.com/video/O4RReIPbri0/v-deo.html Please keep us posted. 😎👍
You did a great job until we went under the sink and you showed everything from the paper gasket to the snap ring in place. You skipped plenty of steps for me to give the 230th thumbs down. I know those steps now but not from this video...
jimmy chungah Awesome I'm glad it helped. Thanks for checking out the video and sharing your Thanks 😀 We would love to have you as a subscriber Thanks again!
Stephen Perez Thanks for watching Stephen. Hope the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
Thanks for taking the time to do this tutorial.Old video, but this may help future viewers: @3:15 you show the flange in place and screws tightened. To get to this point, you have to re-install the spring clip BEFORE tightening the screws.
You are very welcome & we appreciate you watching. Thanks for sharing your info, any & all helpful info is greatly appreciated.
Us fellow DIY’ers need to stick together! Hope all is well. 😎👍
Thank you so much! I had the same exact leak. I was upset because I just moved into my first house and this happened. I took a deep breath, watched your video, and fixed it in lass than an hour for $3. You are a life saver!
That is so awesome....you just made my morning with your comment and experience. Im so glad this video helped. Subscribe to the channel if you're up to it. Thanks again for taking a few minutes to watch the video!! We hope your settling into the new house experience is easy from here :-)
Same for me. Now I’m on my way to fix the garbage disposal with the help of this video.
Thanks! Plumber quoted me $350 to do this! Then he leaned in and whispered “Please don’t pay me $350 for a 10 minute job that will cost you $2 to do yourself. UA-cam it and do it yourself. It’s easy!”
J S
Thanks for watching & we hope you enjoyed the video. That’s pretty nice of him. Hopefully you were able to get the job done. 😀
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
This video saved my butt this past weekend - I replaced my disposal. It was exactly the info I needed to get the job done. Thank you!!
New Revolution Ventures Awesome and thank you for sharing your comment and experience. So glad the video helped. Please Subscribe to the channel that would be awesome thanks again 😎👍
Awesome video. Had this exact scenario and set up. Your video helped me avoid a costly repair bill from a plumber on short notice. Had this fixed in under an hour counting the trip to home depot. Entire couple kit and putty was only $19! Saved a lot and got it done. Thank you and A+.
TimmyM2000
Glad it helped & saving money in these rough times are key. Well done! Us fellow DIY’ers need to stick together. Many more helpful videos to come.
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Yours is the only video that shows the problem mine has and how to fix it. Thanks!
John Packard
What’s up John, thanks for watching! You are very welcome! Glad it helped. Us fellow DIY’ers need to stick together. Many more helpful videos to come!
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks for the video! I replaced the gasket first and it still leaked. I had to take it all apart again to do the putty. Next time I'll do it all the first time. Well worth saving the hassle and guesswork.
GerbilKor
Awesome Awesome & thanks for watching. The putty makes a big difference. That stuff is magic...🤔
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
You’re a good instructor! Thanks.
Good morning, you are welcome. Thank YOU for sharing this. 👍
Thank you so much for this...saved us a bunch of money on a plumber and make the fix very easy! Had to make a small purchase to finish up, but total time working on the garbage disposal was less that 20 minutes!
Hey that is AWESOME....im so glad it helped. Thanks for leaving a comment. Subscribe to the channel if you're up to it...thanks again!!
I would recommend filling the sink when testing. I found that when people leave the sink full is when it leaks.
Thanks for watching & sharing this, any & all helpful info is greatly appreciated!!! 😎👍
This saved me a call to my plumber! Thank you!
Great to hear & we appreciate you sharing this. Welcome to the DIY Raptor Club. Enjoy your day.
😎👍🔧🔩
Thank you so much! Just fixed my leaky sink thanks to your video!
Great job making it a DIY project. Definitely a rewarding and enjoyable experience, not to mention saving money in the process.
We appreciate you sharing this. Let us know if you have any questions and hey if you’re into crypto trading, join our DIY ecosystem and become part of an exclusive group of DIYers.
toolboxtoken.com
Reach out to us any time! 🧰
Mentioning: that ring under the top units, may or may not be the death of you. Or the stress of trying to pop it back on May take you out if not close to it. Either or. 😂😭
Anywho, thank you! Saved mucho monies.
Thanks for posting this video! Looks pretty clear. I get to try this out this afternoon (after picking up the plumber’s putty).
David Pattelena
You are very welcome David. After you pick up the plumbers putty and take on this friendly DIY project, definitely keep us posted if you have any questions. Us fellow DIY’ers need to stick together.
😎👍🔧🔩
Thanks guy...as a handyman these are a lifesaver.
Hamish Ziegler
Thanks for watching! We are happy to hear the video helped. Let us know if you have any additional questions! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again!
Also, below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. Definitely check those out! 😎👍🔧🔩
Thank You for this video very informative. Mine is leaking in that exact spot..
Renee Roveal
Awesome Awesome thanks for checking out the video Renee. We appreciate you taking the time to reach out to us! We are glad the video helped.
Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again 😎👍🔧🔩
Thank you, Michael. Awesome video. Easy to follow and understand.
Chris Francendese Hey very cool and thanks for checking out the video and sharing your comment Chris! So glad the video helped! Please Subscribe to the channel and turn on your notifications that would be awesome thanks again 😀👍
THANK YOUU! I DID IT! I DISCONNECTED the food disposal, I feel so powerful 😄😄 but this is all thanks to this video. I am half way, but I feel good about doing it 💪
Thanks for watching & sharing this Adriana. Completing your DIY projects are definitely powerful & rewarding. 😁
Keep us posted on your project as you finish the 2nd half.
Thai is what I need video,later on I’m going to check my friends one!😎
Very cool & thanks for watching. You will make your friends day if you find there is an issue with his or hers and you fix it.
Welcome to the DIY Raptor Club. 😎👍
I think I have the same leak and I have to fix it . Thanks for posting
Hey Kimberly, thanks for watching. We are always here to help answer questions.
Keep us posted, welcome to the DIY Raptor Club.
😎👍🔧🔩
I truly appreciate this video! Thanks so much!! I had water leaking like on the video and thanks to you I fixed the problem. Blessings!
Great to hear & we appreciate you sharing this. Sounds like you are all back up and running. Great job & hope all is well with you.
😎👍🔧🔩
Hi, question my disposal kerps tripping breaker. I've done the allen wrench twist underneath, broom stick trick and it keeps tripping. It does leak and has leaked for awhile even when it did work. Can the leaking be tripping breaker? Its plugged into a GCI and then powered by a wall switch. Unit is 2 years old. Thanks
It leaks and drips down from disposal. Leak doesnt go in receptical.
Golden Ninja 50
Thanks for watching. The leak may be causing added moisture to the lower fuse which in return, may be triggering the trip. We recommend inspecting all electrical wiring & ensuring all wiring is in good safe working order. You will want to get a new Disposal if it’s leaking at the bottom. Keep us posted. Let us know if you have any questions, us fellow DIY’ers need to stick together. 😀
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I hand no clue on how to fix my leaking sink/garbage disposal. I did it in 30 minutes watching your video my hero thanks
+Gonzalo Arellano Hey there thats awesome news....thanks for viewing and also for leaving a comment. Im so glad it helped. Subscribe to the channel if you're up to it. :-)
+Michael Borders @
Thanks for sharing! It will help me to know how to properly apply the putty!
I hope this solves the issue I had when installing a brand new stored bought disposal that was leaking from the bottom.. any thoughts?
You are very welcome & we appreciate you reaching out to us. Keep us posted on how the putty works. Hopefully it will solve issue. Us DIY’ers need to stick together!
Hope all is well. 😎👍🔧🔩
@@DIYwithMichaelBorders thanks! Putty did its proper job!! No leaks from the top. However, I noticed the brand new disposer leaks from the bottom again...
@@dallancruz734
Thanks for the reply, that’s not cool. You may want to return it for a new disposal. Keep us posted.
😎👍🔧🔩
@@dallancruz734 I just installed a new one and its leaking from the bottom also, did you fix your problem ?
@@DRAGOINTHEHOUSE unfortunately, I had to returned it. It must have been the seal that connects to the PVC pipe or something. The new one that I got, worked pretty well once installed properly. Best wishes!
This was great, exactly where my garbage disposal was leaking. $1.50 later and 30 minutes if my time, it is no longer leaking! Thanks!
Michael Baker
Very cool. We love hearing experiences like yours, saving money is awesome!
That’s too cool! Let us know if you have any questions along the way!
Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal. You may find this PlayList to be very helpful.
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
One of the three screws is rusted shut and will not turn. I was able to turn the housing so the stuck screw is on the outside of the upper housing. Did I hear you say that it could be pried off?
Thanks for watching & welcome to the DIY Raptor Club. You may need to purchase a new flange housing kit to pick up where the old one left off.
If interested in purchasing this kit, visit our Amazon affiliate link below.
amzn.to/3q8pQlm
😎👍🔧🔩
Getting ready to try this....hope its that easy. Thanks for the video
+Bill Fritts Thanks for viewing, how did it go?
Awesome video! Thanks so much for making this! I fixed my leak for $2!
Tyler Mack
You are very welcome & we appreciate you watching. Fixing & completing a DIY project for $2.00 is great. Let us know if you have any questions. Us fellow DIY’ers need to stick together!
😎👍🔧🔩
Great video! Followed and fixed my problem! The only hard part was the stupid garbage disposal. I eventually got it put on!
Carl Argon
Awesome Carl, that’s great news & you are very welcome & we want to thank you for watching & sharing your comment.
Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome.
Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Definitely worked and saved me $$$ thank you
Very cool & saving $$ is great. We appreciate you watching. Enjoy your night.
😎👍🔧🔩
@@DIYwithMichaelBorders thank you very much
@@fatheranalyze5373
😎👍🔧🔩
I used this video to help fix mine, thanks for posting this!
Silarias
Awesome Awesome & thanks for watching Silarias! We appreciate your comment! Let us know if you have any additional questions along the way we are here to help!
Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again!
Also below is a link to our Appliance/Home Repair Video PlayList. It contains several helpful videos that you can benefit from including many more videos garbage disposals....definitely check those out! 😎👍🔧🔩
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Yeah I'm getting rid of mine and just installing straight pipe. I'm done dude. Never used it anyway.
Bobby8451 Thanks for watching the video. Let me know how it goes. I remember living in an apartment years ago and we didn't have a garbage disposal. I guess the less you have...the less can go wrong right . Please Subscribe to the channel and turn on your UA-cam notifications that would be awesome 😎👍.
Very useful because this was our exact problem. Thanks.
Jay Stoler
Awesome! Thanks for watching Jay! Glad the video helped! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again!
Below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can benefit from including additional Garbage Disposal MX videos. Definitely check those out!
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Just subscribed. It's fix up time on the homestead. Thanks.
Jay Stoler
Keep us posted! Let us know if you have any additional questions along the way we are here to help! 😎👍
Good info. however would like to see the actual process in action!
John Mal
Thanks for watching John, below is a link to our video that shows more on this Disposal. You may find this video helpful. 😀
ua-cam.com/video/kKL_vgwtR60/v-deo.html
Let us know if you have any questions, we really enjoy helping out our fellow DIY’ers.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again John!
😎👍🔧🔩
This was amazingly helpful and so simple... Thank you so much!!!
Awesome, thanks for viewing! Glad it helped, subscribe to the channel if you're up to it. Thanks again !
Thank you for this informative video!
Godfrey Woelk
Thanks for checking out the video! We are so glad the video helped! Let us know if you have any additional questions along the way we are here to help!
Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out!
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Thanks, My garbage disposal seal started leaking with cold weather and I found the three screws on the flange were not tightened at all? Should they be?
Thanks for watching & welcome to the DIY Raptor Club. Tightening the screws a bit may solve your leak. Keep us posted.
😎👍
Great and simple explanations. Why pay a plumber $80-$100 bucks to do this? Thanks for the video.
+mark shimala You are the man! I definitely agree.....Im glad it helped :-) If you want, Sub to the channel, thanks again!
Missed what was done with the black rubber seal ring.
Paul Koch
Thanks for watching Paul. The ring serves as a support ring & we apologize for not showing it reinstalled. We should have ... now looking back on it.
As you remove your brace, pay extra attention to the ring to be better familiarize yourself with how it will go back on.
Hope this helps. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Very helpful. Thank you!
TOMMYHAWK77
Thanks for watching, you are very welcome. Glad it helped.
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Thanks for the info!
Amanda Nicole
Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come.
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again.
😎👍🔧🔩
Awesome! Thank you for this video, this is exactly what happened to mine!
Hey very cool, glad it helped. Thanks for taking a moment and sharing your comment. Subscribe to the channel if you're up to it. Thanks again!
Great video, helped a ton
Thanks for watching & we appreciate that. Welcome to the DIY Raptor Club. Enjoy your day.
😎👍🔧🔩
very good help thanks
Nhattuygiaithiensau nguyen
Awesome Awesome thanks for checking out the video and sharing your comment. We are glad the video helped! Let us know if you have any additional questions along the way we are here to help! We have lots of videos that you can definitely benefit from. Below is a link to our Appliance/Home Repair Video PlayList...it is filled with “Around the house” repairs....from garbage disposal repairs...washing machine repairs...Smoke detectors...and lots more. Definitely check it out.
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again 😎👍🔧🔩
Something in my disposal broke(while I was using it) and it is gushing water from several places in the bottom when I turn on the water. I have to think it is traveling through the motor compartment. Any ideas? I did fish out some pieces of plastic fork from the top.
brad h
Thanks for watching & sharing your experience. Safety 1st, make sure you unplug Disposal from Outlet before moving to next steps.
This has happened to us in the past. It made us think that our Disposal was 100% ruined.
A few things you can do.
1. With your Disposal off, run water full open & use your Unclogging Disposal tool & try to loosen up object.
2. Try removing object if you can see it.
3. Fill entire sink full of water & then turn on Disposal. This will allow the water pressure to possibly remove object.
Let’s start there. Keep us posted.
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Just bought a house turns out they didn’t use screws to fit and tighten the bracket now I have a small leak at the top of the disposal
Thanks for watching & welcome to the DIY Raptor Club. That’s no fun. Keep us posted on your project. Congrats on the new house! 😀
Enjoy your night. 😎👍🔧🔩
Can u please say how u clean the excess putty in the sink part on top
Thanks for watching & most people will carefully peal the excess putty off after properly setting parts in place. Keep us posted on your project.
😎👍🔧🔩
Thanks alot...getting my putty. I'll keep u posted. You just saved me from wasting valuable money during this hard time. Bless you.
@@CaramelQT420
You are very welcome & us DIY’ers need to stick together. Enjoy. 😁👍
Do I need to let the water run for a while after changing filters? Or can I just use it right away?
Thanks for watching, what filters are you referring too?
@@DIYwithMichaelBorders the RO filters the white and blue cylinders
@@calderonjd30
Thanks for the reply. For our specific system, the instructions state to have faucet open for 24 hours.
After 24 hours, close faucet and allow system to pressurize. 😎👍
@@DIYwithMichaelBorders I have the same one you have. With the 2 blue filters and the white one
@@calderonjd30
Awesome. Below is a link to our Reverse Osmosis Playlist.
ua-cam.com/play/PLjCXOz8TSkZlQnBuZZrgOiwjkvAkXc_Ov.html
It contains several helpful videos on this system. 👍
Perfect. Thank you.
John rippa
What’s up John, thanks for watching! You are very welcome! Us fellow DIY’ers need to stick together. Many more helpful videos to come!
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
Great!!! Just what I needed! Thank you!
+David Scheetz Hey there thanks for viewing! Hopefully this helped!! Subscribe to the channel if you're up to it, thanks again!!
Thank you!
pastorjosh44
Glad to help & we appreciate you reaching out to us. Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
This was so helpful!!! Thank you!!!
Cheers for the help mate!!!
Thanks for checking out the video. Glad to help...Subscribe to the channel if you're up to it thanks again! 👍
I was looking to fix an internal leak, it comes straight out of the bottom base.
Frank Pichardo Thanks for checking out the video and sharing your comment and experience. Once the unit begins to leak from the bottom....it's best to replace the entire unit. You will run into far too many issues once that begins. Keep me posted. Please Subscribe to the channel that would be awesome thanks again 😀👍
DIY With Michael Borders n
thank you for the video. It was very helpful!
Matthew Fesler
Thanks for checking out the video Matthew! We are so glad the video helped! Let us know if you have any additional questions along the way, we are here to help!
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
Also...below is a link to our Appliance/Home Repair Video PlayList. It has many awesome videos that you can definitely benefit from...including additional videos on Garbage Disposal MX. Definitely check those out!
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
😎👍🔧🔩
thanks for the video! very helpful
+Kamal Aferchich Hey very cool, thanks for viewing!
Thanks a lot
But if it leaks from the bottom the whole disposal need to be replaced with new one
Robert Bagio
Thanks for watching & its best to just replace entire Disposal if it’s leaking from the bottom.
Below is a link to our video that shows & talks more about the Disposal brand we like & recommend. Definitely check it out!
ua-cam.com/video/4nNa9QBDluQ/v-deo.html
Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
very good video, just needed helper to hold camera when removing/resetting snap ring, and when actually removing and replacing disposal. those were my most challenging areas without proper instruction. good job though
+Scott Isom Thanks for viewing, those are definitely the hard steps....How did it turn out?
if I plug the hose that goes from the garbage disposel to the dishwasher am I gonna have problems?
Guyzo
Thanks for watching & we hope the video helped. We are assuming you’re removing your Dishwasher all together...?? If yes, you can purchase caps for this project to properly & safely seal off the Dishwasher drain hole.
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
@@DIYwithMichaelBorders no. I don't use the dishwasher ever and the hose wont stay connected in the back of it so im just disconnecting it. thanks for the reply
Guyzo
Thanks for the reply & it makes sense to remove hose & cap it off if dishwasher is not being used anymore.
😎👍🔧🔩
Will plumping tape work instead of plumbing putty? Help
Suyog Valsangkar
Thanks for watching! That’s a good question & it really comes down to where exactly you will be using the tape. As always if the garbage disposal is leaking from the bottom seal it’s basically time to replace the entire unit with a brand new one.
There are however friendly places on the Disposal that you can use plumbers tape however we recommend leaning more toward a more secure seal given by hose clamps ...
Hope this helps! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩
Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...we cover lots of leaks & repairs.
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
DIY With Michael Borders thanks for the tip I just found out there’s water leaking from the bottom but not from a hole. There are two machine cut incisions at the bottom where the water is coming out from. Thanks for replying so fast great vid btw
Suyog Valsangkar
Thanks for the reply! What’s your thoughts? Are you looking into purchasing a new Disposal at this point?
DIY With Michael Borders well I probably would and my insurance would cover it but if it can be fixed by removing something clogging up the unit then I would rather do that because this disposer still has about 1-2 years more of service left
Suyog Valsangkar
Very cool..definitely worth keeping it if you can stop the leak! Keep us posted! 😎👍
Great video - well lit so I can actually know what I'm looking for! I'm off to get the flashlight to get a better look....oh, what a mess down there last night! :-/
The most important part of the re-assembly where the flange at the bottom that is mated to the top part got skip. ( The ring , re-tightening of the bolt, etc.). I can figure it out, but this is suppose to be a detailed instruction so just a little bit to be desired. But, thanks anyway, I can figure it out from here.
Thanks for checking out the video and sharing your comment. Definitely will help our future viewers. You Rock :-0 Please Subscribe to our channel....that would be AWESOME.
Thanks I think that is my problem.
Dustin Lassuy Very cool thanks for checking out the video Dustin. Keep me posted and let me know if you have any questions. Please Subscribe to the channel that would be awesome 😀👍
The flange was leaking, not the garbage disposal, but good video. 👍
Marc Treiser
Thanks for watching Marc. A worn out flange will definitely do it. Us fellow DIY’ers need to stick together. Many more helpful videos to come!
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
I wish you touched on how to do the wiring
jessepoopoo
Thanks for watching & we hope the video helped. We unfortunately didn’t touch on wiring in this video.
We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come! 😀
Let us know if you have any questions. Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again.
😎👍🔧🔩
my disposal is leaking from underneath, any suggestions on how to fix it?
Thanks for viewing and commenting. Leaking from the bottom indicates possible symptoms of internal damage to the parts as well as the main plastic shell or case that houses all parts. In the past...leaking from the bottom is signs leading to replacing the entire unit as a whole. After you get the new one installed you will be extremely happy with the new update...you will no longer be poring money into the old unit. Let me know what you do...Subscribe to the channel if you're up to it. Thanks again! 😀
Where do u buy the oring seal?
wilson W
Thanks for watching. New O-Ring can be purchased from Ace, Lowe’s, or Home Depot. Keep us posted.
Us fellow DIY’ers need to stick together. Many more helpful videos to come! 😀
Please subscribe to the channel and Ring your UA-cam Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
i can’t go through this part . 1:15 How can I remove the ring?
Thanks for watching. We used a flathead screw driver. The bracket will need to be rotated to loosen. Keep us posted.
😎👍🔧🔩
Thanks
Thanks for watching & welcome to the DIY Raptor Club. Let us know if you have any questions, enjoy your day!
😎👍🔧🔩
Thanks for posting
Hey thanks for viewing and leaving a comment. I hope it helped, Subscribe to the channel if you're up to it, thanks again!
you mentioned verbally but did not show practically how garbage disposal is disconnected which is very important part for lay person.
Thanks for checking out the video. Thats a good point. This video is primarily focused on leak detection.
it left off put back the ring that you took off with the screwdriver
Alice Trujillo
Thanks for watching, hope the video helped. 😎👍🔧🔩
Thank you!!!!!
patthemaniacful
You are very welcome & we want to thank you for watching & sharing your comment.
Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome.
Also below is a link to our Appliance/Home Repair Video PlayList. It contains several videos that you can benefit from including additional videos on your Garbage Disposal...definitely check those out. Thanks again! 😎👍🔧🔩
ua-cam.com/play/PLjCXOz8TSkZmG-ZbhhKPj4Vh3K3MDPXii.html
it is helpful but mine is lesking when i turn it on, so the leak is in the device
Armando Lopez
Thanks for watching & we hope you enjoyed the video. Once your disposal begins leaking from the bottom, it’s best to replace old disposal with a brand new disposal.
Many more helpful videos to come! 😀
Please subscribe to the channel and turn on your UA-cam notification Bell 🛎 that would be awesome thanks again!
😎👍🔧🔩
What if its leaking from the bottom??
Thanks for watching & welcome to the DIY Raptor Club. That’s a tough call...🤔
We always recommend purchasing a new disposal if it’s leaking from bottom. Keep us posted on your project.
Below is a link to our video showing our new disposal.
ua-cam.com/video/4nNa9QBDluQ/v-deo.html
😎👍🔧🔩
Thought I'd come here to save a few dollars. Realized halfway through the video, I'm no plumber...
Thanks for checking out the video! What exactly are you experiencing with your unit? If leaks...have you narrowed down the leak point?
Subscribe to the channel that would be awesome! Thanks again!
The leak is coming from the pipe connected to the disposal. Started when my washing machine still had water in it after I finished a load. (other words, it didn't drain all the water out of the machine because it was backed up) It might be a clogging issue as well somewhere in the house. I saw the "plumbers putty" in the video and immediately got intimidated. It's funny. There was a plumber next door that very day at my neighbor's. I'm thinking she's having the same problem. Thanks for the help. I've subscribed. =)
_rmaze_ Quiambao 😀 very cool! Is it leaking from the rubber hose or the hard tube below the rubber hose? You might just need to tighten your clamp with a screw driver.
Thanks for Subscribing ! 😀👍
Now there's an idea! I think I'll try that. Appreciate it!
My is making a sound when turned on but it is not working, what can I do?
Thanks for watching & welcome to the DIY Raptor Club. Let’s get this figured out. You may have a jam. 1st thing to do is unplug garbage disposal and cut all electrical power to the unit.
Next, you can use the jamming tool or the proper size hex key to un-jam disposal. Below is a link to our video showing this.
ua-cam.com/video/kKL_vgwtR60/v-deo.html
Next, check to ensure that your lower breaker is pushed in. Below is a link to our video showing this.
ua-cam.com/video/O4RReIPbri0/v-deo.html
Please keep us posted. 😎👍
You did a great job until we went under the sink and you showed everything from the paper gasket to the snap ring in place. You skipped plenty of steps for me to give the 230th thumbs down. I know those steps now but not from this video...
This was so helpful!!! Thank you!!!
thanks
jimmy chungah Awesome I'm glad it helped. Thanks for checking out the video and sharing your Thanks 😀
We would love to have you as a subscriber Thanks again!
Thank you!
Stephen Perez
Thanks for watching Stephen. Hope the video helped! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your UA-cam notification Bell that would be awesome thanks again! 😎👍🔧🔩