Please don't stop making these great in-depth videos. I love it! Your presentation is perfect in every video! One could only wish to have at least 10% of your brainpower. :)
You never disappoint with your video, excellent content as always. Hope you’re settling in well in the States. More videos on ISTA D, coding is always welcome.
Salut Ovidiu! Îmi plac clipurile tale! Eu lucrez pentru BMW pe partea de development și folosesc E-sys pentru diverse teste. Îmi place să văd și partea asta de service/upgrades in acțiune 😄
Salut! Ma bucut ! Suna foarte interesant ceia ce faci ! La un moment dat si eu aveam de gand sa intru in partea de Development la BMW dar am renuntat !
@@MOvidiu sunt convins că ce faci tu e mai distractiv. Am un mini, si in viitor probabil voi avea și un BMW așa că mi-ar plăcea să fac rost de toate aplicațiile astea sa le pot folosi la discreție. Din păcate nu e așa ușor...
Great video! Thanks for sharing these valuable informations with us. The only feedback is you didn't mentioned you not used plain e-sys instead e-sys with launcher. Sure it can be obvious for most people but it's always best to mention everything like you can't do fdl coding on BMW just with plain E-Sys, a launcher is needed
Thank you for sharing this. I hope you will do more videos like this. I was under the impression that ISTA+ supports coding for F series vehicles, but I haven't found this in ISTA+. I have an F87 and I would like to disable the legal prompt when i-drive starts. Do I need to get E-SYS or can it be done using ISTA+?
What’s the difference between the yellow rj45 cable and the icom? I use the yellow cable and have 0 issues using esys or even ista.. thank you fo the video ❤️
Thanks Ovidiu, please create video how to program module replacement. for example g30 we replacing used one lane sensor in bumper. ista shows SWW red. how to program it ?
Hello, could you do a video explaining how to use Dr.Gini... Because some of us, not know the basics and there for are a bit lost. My car I need to flash the FSC code to my DME, but have troubles with ISTA-P I have DrGini, but don't know how to use it. That would be of great help. Thanks!
Hi, and welcome to the states! I'm new to your channel. I replaced my head unit in my F02 from another F02. How do I change the VIN in E-Sys to match my car so my Nav/Sat can finally work again please? Thanks so much in advance!
Hello. thanks for your videos! your instructions are the best. Tell me how to code the HDC descent assist function. I have a BMW F10 535 US. Thank you very much in advance.
High quality content! Some ideas for some videos from me. More hands on with ISTA, a ISTA explained video meybe ISTA or Esys video? More hands on like this with Esys. More with ISTA D videos since many are afraid like me to try coding at all. How to write service history in to the display. Video about why you work with BMW? Is it the favorite brand? About yourself// Erdo living in Sweden
Ar fi super dacă ai face încă un tutorial în care sa actualizezi Ilevel-ul complet la F25, teoretic ar aduce îmbunătățiri, update-urile de soft la calculatoarele sale. Altfel nu înțeleg de ce ar mai scoate update-uri de software. Doar la motor am înțeles că nu ar fi recomandat întrucât s-au mai schimbat normele și si-ar face regenerari mai dese, putere mai scăzută, dar nu știu ce sa zic, asa mi-a spus cineva care se mai ocupa și cu lucruri de genul... Tu ce părere ai? Eu zic ca este un subiect foarte important și foarte putini proprietari știu de el.. Chiar și în Esys observ ca arata ca ai un Ilevel vechi (la I-Step (target 22-11-510) fata de I-Step (shipm 12-07-508).
hello I have changed halogen bulbs for LEDs and I need to code so that the typical error of burned out bulbs and the flashing (check) when starting the car does not appear. Could you tell me the process correctly? thank you
Great content 🔝. If i want to upgrade x3 g01 standard headlights to led headlights what coding it needs to be done? I also need wiring or not? Thank you and keep up the good work 👍
Hello, can You please do a video on how to code a I drive controller to work in any bmw? I bought the wrong one and can not return it and doest work on my car
Hello! Yes, it is working perfectly, but I would prefer one that's slim like this one but to have an LCD screen where to se the battery percentage and ideally the connected devices
Te salut Ovidiu. Dă-mi te rog un sfat. Am un e65 (740d) și am o problema cu farul din dreapta. Mai exact fără scurta (xenon). Problema este ca se stinge.. și se aprinde singur cateodata(cu luminile pornite) de nalte ori le opresc sin buton și funcționează din nou pana se stinge iar. Am schimbat becu, modulul xenon de pe bec, modulul xenon de sub far și tot degeaba. Ce crezi ca poate fii? LM2 defect sau altceva? Mulțumesc anticipat
Hello The DOCTOR for Bmw group.I have a question for you.I'll need have a choice for Stable power supply unit for Diagnostic and Programing.I think Telwin the doctor 130 is perfect,but have a people say Gysflash is best.What do you think about that.Best regards.
Please don't stop making these great in-depth videos. I love it! Your presentation is perfect in every video! One could only wish to have at least 10% of your brainpower. :)
Thank you! Will do!
We need more videos like this, going into detail how to code in new options, new modules and etc.
Thanks for filming this.
You never disappoint with your video, excellent content as always. Hope you’re settling in well in the States. More videos on ISTA D, coding is always welcome.
Keep up with the good work! You explain everything cristal clear, Thanks!
Thank you for your support and appreciation!
Thank you for the video. We want to see more of course, especially programming ones.
Especially how to prog a used module to fit to the car!!
You do professional clean Nice work 😊
Please make more videos like this. You're doing a great job...
Thank you, I will
great as always 👍
Thanks again!
More of this please 😊
Salut Ovidiu! Îmi plac clipurile tale! Eu lucrez pentru BMW pe partea de development și folosesc E-sys pentru diverse teste. Îmi place să văd și partea asta de service/upgrades in acțiune 😄
Salut! Ma bucut ! Suna foarte interesant ceia ce faci ! La un moment dat si eu aveam de gand sa intru in partea de Development la BMW dar am renuntat !
@@MOvidiu sunt convins că ce faci tu e mai distractiv. Am un mini, si in viitor probabil voi avea și un BMW așa că mi-ar plăcea să fac rost de toate aplicațiile astea sa le pot folosi la discreție. Din păcate nu e așa ușor...
Great video! Thanks for sharing these valuable informations with us.
The only feedback is you didn't mentioned you not used plain e-sys instead e-sys with launcher. Sure it can be obvious for most people but it's always best to mention everything like you can't do fdl coding on BMW just with plain E-Sys, a launcher is needed
Great point! thanks for the heads up !
Thank you for sharing this. I hope you will do more videos like this. I was under the impression that ISTA+ supports coding for F series vehicles, but I haven't found this in ISTA+. I have an F87 and I would like to disable the legal prompt when i-drive starts. Do I need to get E-SYS or can it be done using ISTA+?
You need e-sys
Awesome. Did you make a video to help to install esys?
I use DHCP server tool on the laptop instead wifi router
What’s the difference between the yellow rj45 cable and the icom? I use the yellow cable and have 0 issues using esys or even ista.. thank you fo the video ❤️
Icom cover all vehicles from bmw group and have a dataflow of 1Gbit, the yellow rj45 only F&G Series, maybe for later mini models and rr models..
@@MarioS1000RR thank you 😊
Great❤👍🏽
Thanks Ovidiu, please create video how to program module replacement. for example g30 we replacing used one lane sensor in bumper. ista shows SWW red. how to program it ?
If it is red, that means the module is bricked, defect, the wiring is damaged to the module , or is a problem with vehicle configuration in ZGW
❤❤❤
Can you explain connection setup for router and icom? Please
Hello, could you do a video explaining how to use Dr.Gini...
Because some of us, not know the basics and there for are a bit lost. My car I need to flash the FSC code to my DME, but have troubles with ISTA-P
I have DrGini, but don't know how to use it. That would be of great help. Thanks!
Hi, and welcome to the states! I'm new to your channel. I replaced my head unit in my F02 from another F02. How do I change the VIN in E-Sys to match my car so my Nav/Sat can finally work again please? Thanks so much in advance!
Hello. thanks for your videos! your instructions are the best. Tell me how to code the HDC descent assist function. I have a BMW F10 535 US. Thank you very much in advance.
High quality content!
Some ideas for some videos from me.
More hands on with ISTA, a ISTA explained video meybe ISTA or Esys video? More hands on like this with Esys. More with ISTA D videos since many are afraid like me to try coding at all.
How to write service history in to the display.
Video about why you work with BMW? Is it the favorite brand? About yourself// Erdo living in Sweden
Ar fi super dacă ai face încă un tutorial în care sa actualizezi Ilevel-ul complet la F25, teoretic ar aduce îmbunătățiri, update-urile de soft la calculatoarele sale. Altfel nu înțeleg de ce ar mai scoate update-uri de software. Doar la motor am înțeles că nu ar fi recomandat întrucât s-au mai schimbat normele și si-ar face regenerari mai dese, putere mai scăzută, dar nu știu ce sa zic, asa mi-a spus cineva care se mai ocupa și cu lucruri de genul...
Tu ce părere ai? Eu zic ca este un subiect foarte important și foarte putini proprietari știu de el.. Chiar și în Esys observ ca arata ca ai un Ilevel vechi (la I-Step (target 22-11-510) fata de I-Step (shipm 12-07-508).
yeah it is a nice vedio. thank you. if you can show the same how to change the car from using FTM to TPMS will be great
hello
I have changed halogen bulbs for LEDs and I need to code so that the typical error of burned out bulbs and the flashing (check) when starting the car does not appear. Could you tell me the process correctly?
thank you
Great content 🔝. If i want to upgrade x3 g01 standard headlights to led headlights what coding it needs to be done? I also need wiring or not?
Thank you and keep up the good work 👍
Hello, can You please do a video on how to code a I drive controller to work in any bmw? I bought the wrong one and can not return it and doest work on my car
Could you let us know please how you have managed to activate ESYS Launcher Pro 2.8.1 as the provided license expired a few years ago?
Hello.Can you create a video only for (how can create a wirelles conection)
For sure!
Hello, I have a question, is the mobile wifi you have good or do you recommend another one?
Hello! Yes, it is working perfectly, but I would prefer one that's slim like this one but to have an LCD screen where to se the battery percentage and ideally the connected devices
Am ista, inpa mai multe programe pt diagnosticare. Cum și cu ce îmi recomanzi sa identific problema?
Hi I need to get 2017 F30 fault not clearing . .1F2108 (wrong data record ) I the change DME , original was water damage .
Depending on how cloned ! Recomand to ask the guy/ shop who done it first time to reset the working hours!
@ the dme is a 8.4.1
may i know to code the ecu using esys can just use enet cable but not icom next?
Yes , on F and G serie.
@@MOvidiu is it save to use enet cable to program f series bmw?
Te salut Ovidiu. Dă-mi te rog un sfat. Am un e65 (740d) și am o problema cu farul din dreapta. Mai exact fără scurta (xenon). Problema este ca se stinge.. și se aprinde singur cateodata(cu luminile pornite) de nalte ori le opresc sin buton și funcționează din nou pana se stinge iar. Am schimbat becu, modulul xenon de pe bec, modulul xenon de sub far și tot degeaba. Ce crezi ca poate fii? LM2 defect sau altceva?
Mulțumesc anticipat
Question hopefully you can help me I have a2016 bmw 750i the cluster turns black I have to repleace it or there something I can do
You need to diagnose it first ! To see if the cluster is the problem or something else!!!
salutare, good work 🙏🙏 ce tableta ai ? de unde pot lua icom original, pe net is o gramada ,
Salut! HP x2 G8, icom original doar prin comanda de la un magazin de piese auto sau la reprezentanta BMW
Hello The DOCTOR for Bmw group.I have a question for you.I'll need have a choice for Stable power supply unit for Diagnostic and Programing.I think Telwin the doctor 130 is perfect,but have a people say Gysflash is best.What do you think about that.Best regards.
Hello! Telwin is ok , not great but ok, in state the Gysflash is more superior! that is at a professional level
Thank you for answer.
does these tools work for all kind of coding?
They work for coding, programming, and more !
can you help me in activate rear camera f40
if you are in the area! yes
salut! imi lasi te rog parerea ta sincera, bazata pe experienta acumulata, la modelul acesta: BMW F10 4.4 bezina din 2016? mersi
Salut! Parerea mea ? Pai, sunt bune atata timp cat sunt intretinute!