One thing I forgot about Delta printers is that this can happen and it "SEEMS" like your bed level is off, but it's your belt. I only re-discovered this by accident, and I was feeling for tightness on my belt, and then I found it....a 1 inch piece of the belt that was severely worn. (apparently gyroid infill is hard on a delta's belts.) Thanks for re-affirming my diagnosis.
Thank you. Yeah, the weight on the gantry is there all the time, and it is a good practice the move the print head if the printer is not used for some time. Gyroid infill is your favorite infill type? I know why, it's pretty indeed.
same thing happen to me with one of my qq-s pro and this is something ive seen alot in flsun groups but so far for me with my 2 machines they've lasted 2 yrs but this past week i noticed the same thing as u with the bed leveling an found it was my front left belt that had stretched, ive just now gotten time to change it but i only have enough belt on hand to change the single stretched belt so im ordering 20m of belt right now to make sure i have enough to go ahead an change them all on both of my qq-s printers with some extra left over.
One thing I forgot about Delta printers is that this can happen and it "SEEMS" like your bed level is off, but it's your belt.
I only re-discovered this by accident, and I was feeling for tightness on my belt, and then I found it....a 1 inch piece of the belt that was severely worn. (apparently gyroid infill is hard on a delta's belts.)
Thanks for re-affirming my diagnosis.
Thank you.
Yeah, the weight on the gantry is there all the time, and it is a good practice the move the print head if the printer is not used for some time. Gyroid infill is your favorite infill type? I know why, it's pretty indeed.
same thing happen to me with one of my qq-s pro and this is something ive seen alot in flsun groups but so far for me with my 2 machines they've lasted 2 yrs but this past week i noticed the same thing as u with the bed leveling an found it was my front left belt that had stretched, ive just now gotten time to change it but i only have enough belt on hand to change the single stretched belt so im ordering 20m of belt right now to make sure i have enough to go ahead an change them all on both of my qq-s printers with some extra left over.
Yup, the bed level was off and I couldn't get it right. When I move the toolhead, i have noticed that,
How is your printer working now?
I see you still have the sticker on the hot end, you can remove this warning label as there are some extra vent holes behind it.
I did remove the sticker last week, thanks for the tip
Thanks
getting me a qqs pro this week
Oh, that is really nice. How are your thoughts about it till now?
I like it.
can you post a link to the belts you bought! ty
These are standard 3D printer belts 6 mm
Those must've been some real low quality belts... That should never have happened with some decent quality ones...
Yes that is totally true, there was some wires in the cheaper belts...
3 belts in 2 months …
This happened 3 times? Oh wow… but on all sides it just one side?
@@Zachary3DPrints only one side,i was close to drop out of the window
Link for belts ????????????????