DIY Glitter Flow Peekaboo woodgrain Mermaid Tumbler
Вставка
- Опубліковано 15 чер 2019
- #epoxycraft #diyepoxy #glittertumbler
If you have questions or need help come join us in our Facebook group! It's a big community of tumbler makers all willing to help each other! / littleleeandrose
Shop our website and use the code MOREGLITTER for 10% off one order (not valid on subscriptions) iwantglitter.com
/ littleleeandrose
Grab coupon codes in our weekly SnapChat episodes on SUPERFLY DIY or LittleLee and Rose
TikTok vm.tiktok.com/gEWVgd/
GLITTER SUB BOX littleleeandrose.com/pages/su...
SWAG BAG SUBSCRIPTION littleleeandrose.com/pages/su...
SHOP OUR CRAFT SUPPLY ONLINE STORE! www.littleleeandrose.com
PRODUCTS USED IN THIS VIDEO
Stainless Steel Tumbler amzn.to/3B64ddf
White Glitter Chunky Cut littleleeandrose.com/collecti...
White Glitter Fine Cut littleleeandrose.com/products...
Printable Vinyl littleleeandrose.com/collecti...
Craftopia Transfer Tape amzn.to/3cqmglM
Painters Tape amzn.to/3wtr6FS
Krylon Spray Adhesive amzn.to/3R8Wbqd
Nitrile Gloves amzn.to/3pKr8Fq
Chemical Respirator amzn.to/3ceMqbn
Dust Mask amzn.to/3PLCiUX
White Primer Spray Paint amzn.to/3dVh89G
Clear Gloss Spray amzn.to/3ALWW3l
99% Alcohol amzn.to/3PIb3ed
Silicone Stir Sticks amzn.to/3PPZHEK
Tumbler Turner amzn.to/3CveYrR
Tumbler Turner amzn.to/3wsC4eQ
Craft Knife amzn.to/3ch8wdk
Brayer Roller amzn.to/3pJOnPY
Cup Cradle Laser Line Up amzn.to/3TcF6NX
Mini Scale amzn.to/3R6P0Pd
Fifo Squeeze Bottles for Epoxy amzn.to/3KkFbeD
Measuring Cups amzn.to/3KgQzbn
Felt Squeegee amzn.to/3R67Ea3
Epoxy Mixer amzn.to/3CyO02n
Silicone Mixing Cups amzn.to/3AK1xCN
Silicone Mat amzn.to/3dVbXqd
Parchment Paper amzn.to/3dWy6ED
Vinyl amzn.to/3CuDhG8
Holographic Vinyl amzn.to/3wtehv6
Opal Vinyl amzn.to/3ckVD1Q
Kitchen Torch amzn.to/3R9hqIU
Holographic Vinyl amzn.to/3dZu6na
WATERSLIDE PAPER INKJET littleleeandrose.com/collecti...
WATERSLIDE PAPER LASER littleleeandrose.com/collecti...
WEEDING TWEEZERS. littleleeandrose.com/collecti...
WEEDING BALL littleleeandrose.com/collecti...
EPOXY WARMER littleleeandrose.com/collecti...
EPOXY SCALE littleleeandrose.com/collecti...
*Keep in mind I am an Amazon Affiliate. This does not change pricing for you in any way but I possibly profit from your purchases through my links
IMPORTANT NOTE Epoxy resin is toxic while it is curing, and safety precautions must be taken. Wear proper protective equipment (nitrile gloves, long sleeves, full-face respirator, and apron) and work outside or in a well-ventilated area. Do not allow epoxy resin to touch your skin or be inhaled through fumes or dust. If you get some on your skin, wash it twice well with soap and water. Always read the safety information! - Розваги
Sooooo beautiful!!!! I love it and love how the glitter flowed together.
Loved this cup! You always do such an amazing job. And being homeless hasn’t stopped your creativity from flowing one bit! I would never have thought this all would look good together but it did!! Keep on making videos as you’re able to! Love ya girl!!
Love that you added the purple glitter, every thing looks good with woodgrain 😊
I love your tutorials. Thanks to you I got a chemical mask before starting to make cups. I have a constant cough and do not want to make it worse. Thank you so much for your safety precautions.
I want to thank you for teaching me so much!! I’ve saved so many of your videos. I’m in love with this Tumbler!!! I enjoy watching all your Channel 🥰❤️
This is just gorgeous! Thank you for the tutorial!
Beautiful cup!! Love your tenacity to get these videos out despite your home displacement. You're amazing😊
You are awesome!!!! Love everything you do...been wanting to do a cup like this but after this tutorial I’m inspired... thank you 🙏
wow! so worth the effort! Beautiful results. thanks for the tutorial -
Thank you for showing us newbie the basics it helps to see all those steps that we need to feel comfortable with. You are awesome to keep doing tutorials with everything happening with your house. The cup is gorgeous.
Ohhhhh, I love this cup!! 😍
The depth in the layers are amazing
I make cups and I learned a lot from you . Thank you ! This cup is SO BEAUTIFUL! ❤️
This is beautiful as always. Keeping you my in thoughts. ❤️
This is for gorgeous!!!! Of course I had to order the kit❤️❤️
Wow! Amazing process.
Love this cup. Thank you for making this tutorial ♥️
Gorgeous 😍...you have the patience of a saint and so much talent 🤩
You taught me about the torch. Some other group tells people the heat gun works... I ruined some cups because of bad advice. You rock!
You're so awesome! I'm really impressed!
This cup is Beautiful! I'm gonna try this!!!
I want to do this. Beautiful!!! You are such a great teacher and answer any questions we would have....
I know the feeling! One of our dogs jumped up on the stove and turned it on while we were gone. Started out kitchen on fire. Luckily we weren't gone long and it was mostly smoke damage. Both dogs were fine but full of soot. Didn't have a kitchen for 2 months. I feel your pain. Awesome video btw! Beautiful cup... can't wait to try it!
I absolutely love this look. I like it alot better before the decals but it still is a beautiful piece.
That is beautiful!! Good job
Thank you so much for your videos they have really helped me and given me some ideas that I will use in my endeavors to create resin cups. I especially love the wood grain techniques.
BEAUTIFUL!
Love,love,love your videos
Beautiful!!
wow that is so beautiful
That's a mouthfull!!
My hats off to you thank you for teaching me how to make sure creative things
This cup is beautiful
I always love your work beautiful job.
Fabulous and excellent tutorial!
Amazing job!!
I love this and know what I will be doing soon!! 😘
I just love your tutorials!!! I actually found the 91% alcohol for $1.78 at WalMart. YAY!
WOW that is really cool
I need a teacher like you .is beautiful
Thanks again for a great lesson. Bless you having triplets and being homeless and keep on keeping on.
I love your tutorials and I'm watching this one for the second or third time LOL! I'm still trying to get brave enough to do this type of peekaboo. Just wanted to say that if you spray your alcohol inks with Kamar Varnish instead of Clear Glaze, they won't turn green.
Great tutorial! Following!
Beautiful
Nice job!
Gorgeous!! Thank you so much for all you do!
Oh no. Hope your insurance covers it. My friends house burnt down a year and 9 months ago. They finally got in their new home a month ago. She’s happy again 💕 Good luck on getting your home together soon. Praying for your family!
Softball cup would be amazing.
Awesome tutorial Summer!!
Couldn’t you use a light brown or tan spray paint over the glitter. That way you wouldn’t have the white to touch up ? Just a thought....
@@jamiewalthall8478 you can use any color spray paint... it's totally up to the you!
Kimmie Cupz thanks! I thought I was commenting in the general comments, but I “replied “ under yours. Can you tell I don’t comment much? 😂 Thanks for the response! I’m very new to this cup thing!
@@jamiewalthall8478 lol its ok!
Stunning! How much would you sell a cup like this for?
How many coats of spray paint over glitter and do you have to do any of that extra over glitter once it's done or can you add decal then do apoxy on over decal
That's awesome. Takes a lot of layers of epoxy though
Hiya love this, please can you tell me what sort of tumblers do you use ?
Wondering -- are you doing the decal using a print-then-cut on a Cricut or similar cutter?
If I just used white spray paint...do I have to seal it before rubbing some away?
I watch all your videos! I hope you dont mind me using you for inspiration on projects- love your channel !
Are you in her Facebook group! She doesnt mind at all!!!
@@kimberlyblack8904 no Im not ! is it under the same name she has up here ? thank you!
@@jmiller612 yes! facebook.com/groups/littleleeandrose/
Gorgeous! Can you do the wet method putting on a regular vinyl decal ?
Yes! You can!
Beautiful tumbler! Do you not tape off the top/mouth part of the cup???
so the oil (is it baby oil?) will easily take off that layer?
For those of us who are new , how much heat should you use as you dont want to melt all the epoxh off cup lol im assuming just enough to thin abit to move it aroiund
Beautiful how much would you charge for this? It took a lot of live and care to create this!
Do you need to seal the white sticker decal before applying to tumbler ?
I love this idea and i think your work us absolutely anazing. I would like to try this idea, but would like to make it look like the colors were showing through rock or stone, like a cracked geode. Would i use the same method as the wood grain method, just with grey's, or should i do it a different way?
Yes, you can definitely use grey’s and black’s to make it look like stone or rock!
Your tutorials are spectacular! I'm curious about your comment about not running the air conditioning because of the epoxy. I have never closed the air vent in my craft room while epoxying...
I'm wondering if I should start?
CandorCoffee AndBooks it’s possible to have issues with your epoxy if the temperature is too cold.
Do you have to have the rotating thing? I’ve send you do the hang method I’m just curious when you leave it to cure does it have to spin all night or can you just hang it?
Vannette Lusty if you want to do this kind of cup you would need a turner. You would have to at least spin it for 4-5 hours depending on the epoxy you use.
I am brand new to tumbler making. I don't have a vinyl cutter. Can I use the glossy waterproof sticker paper and print on that instead of vinyl decals? Thank you for your time!
What type of paper was the mermaid on? What type of printer do you use? I have a inkjet
You could use as a shadow and put the regular sticker paper that would have been so awesome
Pilsner cups are perfect for wood grain bat
Love you too UA-cam wonderful platform
I was wondering what you used to print your stickers?
Were do you get your tumbler and how much
i don't know if i'm missing it or what, but did you mention how much epoxy to use? that seems to be my biggest issue when im having problems.
Can you use a hairdryer if you don't have a heat gun?
Beautiful! Serious question: How do you get the glitter off your silicone mat? I’ve tried a lint roller and I still have glitter on it.
Try rinsing it off under water over a colander with a paper towel in it . Let glitter dry on paper towels.
Dana Murphy-Love i use baby wipes!
What paint are you using for the woodgrain ?
how come we can't use the UV resin and regular colorant for resin?
In the beginning you used epoxy instead of mod podge is that correct?
What kind of. Pepper u used for the alwater slide decal
Where did you get your inks?
What kind of torch do u use
I spayed my cup, what type of alcohol did you use to wipe the spray painted area off because mine is not budging
J.Drew Hair She used 91% and lots of elbow grease. If you use 99% it will be easier. She used what she had on hand. Also you can use a magic eraser too with alcohol and that will help.
Love it! I love your channel as it is very informative and inspirational. ❤️❤️ I do have a question. I had a bug land on my cup about 1 1/2 after applying epoxy. Lucky I was able to remove it. However now that it is dry, the epoxy is uneven where the bug was. How can I fix that tiny spot without having to epoxy the entire cup again? Please help
Evelyn Pineda hi! I’m Cassie one of Summers moderators from her Facebook group trying to help her out with questions. Unfortunately I don’t think you will be able to fix that one spot. You’ll have to sand and re epoxy. But if it’s not to uneven and you can get it pretty smooth with sanding you should be able to do just a hang method. It’s one of Summers first tutorials!
Thank you! That is exactly what I did and it worked.
Sand it lightly(where the fly landed), then apply (depending on size) 1-2ml as needed, like you'd paint your nails!
So if you want to use an ink that would turn green under your spray paint could you instead use you epoxy as your next layer? Or would it cause the ink to run?
Jaylene Hege you can just epoxy right over the alcohol inks
How did you get your sticker cut out perfectly?
When did you apply the glitter?
Where did you get your torch?
can you use matte sticker paper?
Did you sand it down at all?
What type of mask do you have?
Just curious as to why you didn't just do two coats of resin? Like after the wood grain, place the letters and mermaid then epoxy cutting it down to two....just wondering what was the method/reasoning?
How much would you sell this for?
Which epoxy did you use in this video...I hear her mention it and when I go try to find on Amazon, all these different ones come out...I live in a hot. Climate place and need something that can withstand the heat...I'm using the pro marine right now but would like to try different ones....thank you
Claudina Longoria she has all the ones she uses in the drop down box.
Do you have a link to the brush? Or the name of it? I could make it out
I needed to keep listening lol chip brush...got it
Landscape mode would allow us to see this bigger.
Anybody know what the last chunky, the silver/white is?
Hi! If my tumblers are already the color I want to use, do I still have to do a base coat?
Hi Emma, I'm a mod with LLR and helping Summer. As long as you can scuff up the surface, you should be ok. You need something giid the epoxy. Mp, or paints to stick too!
Ty!😃
WHAT KIND OF PAPER IS THAT AND DO YOU JUST PRINT IT ON A REGULAR PRINTER
Ficou muito bonito eu adorei😍😍 e o efeito madeira que você fez também gostei muito😊😊 ficou muito legal,meus parabéns por ter feito isso e continue assim 😉😉.
How much do you charge for those??