Ι love the MK18 platform . I have the same Daniel defence MK18 12'' AEG from E&C . Perfect toy but I love yours more . Time to buy a second green gas MK18 . Ard you have with accuracy at long distance ??? (20+ meters )
Thanks! The mag is made of some sort of polymer/plastic its light and gas efficient. In 10 seconds gas filled mag it can fires around 40 shots or more depending on the weather and the kind of gas you are using.
Hi, I cant tell by now since my GHK is still new and haven't got a chance to bring it to the game. But what I ve heard its durability is good. So far I'm using it for in house plinking and it runs smoothly.
Yes bro same experience the gas tube and its gas block are not properly tightened but I fixed it by removing its lower rail just remove the screws on the left and right of the hand guard then you have now the access to the gas tube and block. Remove the flash hider so you can slide out together. Apply masking tape at the end of the gas tube that will be inserted at the hole of the upper receiver,then put one inch tape also on the outer barrel where the gas block will be positioned then on th lower portion of the gas block tighten the grub or set screw small hex key needed then install back the lower part or the quadrail that's all. I would like to make a video but I already sold my MK18 because I need cash. But it's a great GBBR.also check the surface or the gas port of the LOADING nozzle where the magazine gas port matching in.try to smooth the surface by a very fine sand paper to avoid damaging the rubber near feed lips of the magazine.
Goalkeeper Nineteen Thank you bro I will try that I appreciate your detailed reply. Yes definitely this gun has been impressive and trademarks look great. My first GHK and I’m sure I’ll be looking into another sometime soon 👍
@@southwest8719 you are welcome bro. We as AIRSOFTER should help each other sharing ideas to one another. Enjoy your MK18 MOD1 GBBR bro.in some of my videos I love doing some TRANSITION DRILL and reloading I'm a bit slow but little by little I'm improving.
@@gamerjuan4531 ok sir you may check other shop kung saan ka mas makaka save ng pera basta available ang unit.as of now diko na nagagamit mga airsoft ko dahil nandito na ulit ako abroad after ma stock ako dyan sa pilipinas ng 6 months.
@@zeppkfw sir kung ako sayo since nasa states ka naman order kanna sa Taiwan mas mura like SAMOON. sa pinas kasi ang laki na ng patong. Thanks sa comment. Ask mo muna locality nyo about rules governing airsoft importation.
Sir San mo nabili unit mo? Bibili sana Ako. Isang store lang binilan mo pati accessories? Ang Mya pinalitan mo Yung butt, nose, handle? Patulong Naman to point me to the right store. Thanks
Hi sir, mas advisable na punta ka na lang sa mga local airsoftshop sa pinas like sa toy soldier doon ko nabili iyan. Kasi kung ikaw mag pa shift from Taiwan baka magka problem pag pasok sa pinas.
Hi bro. Sulit naman ang GHK medyo expensive nga lang. Ginamit kp ghk ko nung nandyan ako sa pinas during lockdown masasbi Kong ok ang performance. Pero ibinenta ko bago ako bumalik ng work ko dito abroad. Thanks. Magpul CTR yung buttstock nya pero hindi naman pang real steel.
Very nice and good review. Very nice of showing different angles and different parts.
Why do i feel that this man rick rolled us from 2:03 for a few seconds...
😂
Great video, looks supper slick
Thank you for appreciating my video. God bless.
Ι love the MK18 platform . I have the same Daniel defence MK18 12'' AEG from E&C . Perfect toy but I love yours more . Time to buy a second green gas MK18 . Ard you have with accuracy at long distance ??? (20+ meters )
That’s my dad’s favourite rifle, ‘killed’ more enemies 🤣🤣
Mk18 is my kind of rifle but in our country we civilian are not allowed to possess hi powered rifle so I go airsoft haha.
@@goalkeepernineteen1919 no no, I say the airsoft, I play wargame with my dad😆
@@johnsoncheung4576 that's great way of bonding. A have a son age 17 but no interest in playing airsoft.
@@goalkeepernineteen1919 oh, my first time to play airsoft with my dad was 17
@@johnsoncheung4576 well thats nice having fun playing airsoft with your father. Airsoft is a great sport but expensive lol
Nice video man!! Bro i'm new on this, the mag is metal or plastic and how many shots you can get of a full mag of gas?
Thanks! The mag is made of some sort of polymer/plastic its light and gas efficient. In 10 seconds gas filled mag it can fires around 40 shots or more depending on the weather and the kind of gas you are using.
@@goalkeepernineteen1919 thanks man, there's steel version of this mag?
@@juneors yup there is in fact the steel mag of GHK M4A1 GBBR will fit into it. They are interchangeable.
Hello :) the hop up chamber still breaks as easily as with the other m4 models from ghk?
Hi, I cant tell by now since my GHK is still new and haven't got a chance to bring it to the game. But what I ve heard its durability is good. So far I'm using it for in house plinking and it runs smoothly.
@@goalkeepernineteen1919 Ok thanks, then I hope that the chamber lasts longer than my other m4 :)
@@alienbeam1092 I hope so, anyways you can upgrade it with much better hop material once the old one breaks.
Suggest to you use t-nt‘s hop up chamber and barrel, my ghk m4, dad’s mk18 and ak in using
www.tnt-airsoft.com
Do you recommend buying this?
Hey bro, mine just came in the mail. It seems like the gas tube is rattling around loose. Do you know if this is normal?
Yes bro same experience the gas tube and its gas block are not properly tightened but I fixed it by removing its lower rail just remove the screws on the left and right of the hand guard then you have now the access to the gas tube and block. Remove the flash hider so you can slide out together. Apply masking tape at the end of the gas tube that will be inserted at the hole of the upper receiver,then put one inch tape also on the outer barrel where the gas block will be positioned then on th lower portion of the gas block tighten the grub or set screw small hex key needed then install back the lower part or the quadrail that's all. I would like to make a video but I already sold my MK18 because I need cash. But it's a great GBBR.also check the surface or the gas port of the LOADING nozzle where the magazine gas port matching in.try to smooth the surface by a very fine sand paper to avoid damaging the rubber near feed lips of the magazine.
Goalkeeper Nineteen Thank you bro I will try that I appreciate your detailed reply. Yes definitely this gun has been impressive and trademarks look great. My first GHK and I’m sure I’ll be looking into another sometime soon 👍
That did the trick thanks again
@@southwest8719 you are welcome bro. We as AIRSOFTER should help each other sharing ideas to one another. Enjoy your MK18 MOD1 GBBR bro.in some of my videos I love doing some TRANSITION DRILL and reloading I'm a bit slow but little by little I'm improving.
Sir Magkano kuha mo kay Toy Soldier nyang MK18? Planning to buy po kc. Ilang FPS max niya? Maraming salamat s magiging reply mo po sir. God bless..
Sir, Nabili ko ito ng 35,200 Php. FPS 380 to 400 out of the box. Thanks
@@goalkeepernineteen1919 salamat s reply sir. Mukhang mas mura kay neknek airsoft store sir. ₱30,000 sknila.
@@gamerjuan4531 ok sir you may check other shop kung saan ka mas makaka save ng pera basta available ang unit.as of now diko na nagagamit mga airsoft ko dahil nandito na ulit ako abroad after ma stock ako dyan sa pilipinas ng 6 months.
@@gamerjuan4531 Mabanggit nga kay Neknek yan. 30k lang pala bigay nya. Hehe kuha ako agad pag may stock na
@@skullfrogtango8392 nsa site nila sir.
How much is it and where did you get it from??
I live in the Philippines too btw
I bought it at 35,200 pesos
@@goalkeepernineteen1919 Not bad. Magkano shipping pag sa PH? To California umaabot ng $100 ouch.
@@zeppkfw sir kung ako sayo since nasa states ka naman order kanna sa Taiwan mas mura like SAMOON. sa pinas kasi ang laki na ng patong. Thanks sa comment. Ask mo muna locality nyo about rules governing airsoft importation.
Sir San mo nabili unit mo? Bibili sana Ako. Isang store lang binilan mo pati accessories? Ang Mya pinalitan mo Yung butt, nose, handle? Patulong Naman to point me to the right store. Thanks
are you filipino?
Sir is it possible to ship them dito sa pinas from taiwan? Nasa magkano kaya aabutin?
Hi sir, mas advisable na punta ka na lang sa mga local airsoftshop sa pinas like sa toy soldier doon ko nabili iyan. Kasi kung ikaw mag pa shift from Taiwan baka magka problem pag pasok sa pinas.
Orig magpul ctr sir or pts? Balak ko rin kumuha ng ghk.
Hi bro. Sulit naman ang GHK medyo expensive nga lang. Ginamit kp ghk ko nung nandyan ako sa pinas during lockdown masasbi Kong ok ang performance. Pero ibinenta ko bago ako bumalik ng work ko dito abroad. Thanks. Magpul CTR yung buttstock nya pero hindi naman pang real steel.
@@goalkeepernineteen1919 salamat sir! Decided nako. Ghk na kunin ko hehe. Ingat lagi sir!
Saan mo Yan na bili sir? At magkano din? Txn
A link to buy it ?
Where can I get one?
Look for any local airsoftshop at your place or try online.