No, i don't have it, but i've See IT 3 Times in Action, but 2 are in the area, 20 - 35km away, one mill have do a Job in the nabour-village 2,5km away every jear...
We have a guy that saw’s for us with a woodmizer you walk with. He’s had for 15 years we can’t convince him to get a 70. I couldn’t imaging even going back to being attached to the mills. The super 70 is a game changer.
@@americandream_89 I bought mine new in 15. It's been a tough little mill. Just like to have more production. Videos like yours make me want to trade up. Woodmizer told me back in October it was an 18 mo. Wait on one like yours though.
Hey I run a lt70 as well but currently it’s not running correctly. It runs full power for about 15-20 minutes from cold. Then just slows down to about 2/3 power, very slow. Has a few engine codes, which are 522574 - DPF 3719 - DPF Operator Interface 3251 - DPF Differential Pressure Sensor 1485 - Main Relay Wondering if you had any experience with this or had any advice, thanks
Our 22 model did the same thing or at least similar and it had a pinched wire in the loom, took us forever to find it. Have you contacted Woodmizer with this issue?
You can hang a 20l or 40l bucket on the sawdust ejection with the carrying handle, in between joints they preferably a 66 degree pipe elbow a... This works perfectly, lowest cost, hardly takes up any space, after 1 to 3 logs they empty the bucket into a tank / barrel / trailer or wherever they want to go... Alternatively, you can attach a container with dumping function as in 'Serra sawmills'... Then always empty at the beginning or end of the cut... Best use of space and material flow possible in all directions around the sawmill
Yeah I’ve seen many use a bucket 🪣 Back before we had electric and put in a conveyor. I had a Hugh box I had fabricated and we would shovel everything in it at day end. Then take the loader and empty in dust pile out back.
I’m always checking blade wheel/belt tension it really makes a difference on these mills. We swapped the steel beam deck out about 8-9 months back. Currently I’m using radiator fluid and water. I prefer diesel but when it’s $5 a gallon it’s wasted money.
Hey dear Lt 70 owner, Thanks for your new Wood-Mizer sawmill Video ‼️ This is Welcome to evryday, but at Christmas more, Ist 1 of the Things IT make me Happy 👍👍‼️ Follow your Channel only To See the Things around the Logjard and my Special-Favorit ist the Things round the Wood-Mizer Lt 70... We bye and start self in the Last month with a Lt 70 Standard (produktionyear 2007/ in realy good shape) I will say thanks To share your informations and Videos with us! Your Style tho Produce and Mix the Sound ist the best i ever See (can hear the Sound of Produktion, Most time nice Musik, and your speaking comments are great, and If your dont say anything i Like IT Same ... You have Help me in a realy Big Level handle and Anderstand the Lt 70 Thanks for this and i Hope you Produce and share more of this🙏🙏 I think If your include the Name Wood mizer in the Video-Name, your Channel became more visits and follower, what the Channel whit the best Wood-Mizer Videos in my opinion deserve!!! Wish you, your Channel and Family the best ‼️, And blessed nice Christmas-Days with your Family Greatings from (East-) Germany David
Truly appreciate your support and time. I hope you and your family had a great Christmas together. I’ve got family in Germany 🇩🇪 I’m working on more videos around the mill. Hopefully I’ll continue to help you and others out. Your correct the videos do better with the word Woodmizer in title. Congrats on the mill. They are a great source of income. How’s finding help in Germany? Thanks for all your input!
Yes, your Support hast Help me To Unterstand for what we neues to looking for at the time WE Bye the mill, and To See, what need the mill, and what a Type of Wood-Mizer we will bye... Lt 70 is seldom... Most with Hydraulik ist lt 40, and lt 20 coming in the Last years with many Machines Up... Thanks for your great wishes❤️ Nice To hear from your Family Part in Germany, your Welcome ‼️ Support in Germany or Austria ist Spend from Wood-Mizer Germany with all areas (parts, sawmill band sharpeners - for complete area of Germany and Austria and they Support the sharpening also for other sawmills fabrikates, repair Personal can you Kontakt direktlie, or the selling and Rest of Theam..., Lokal wandering sawmill Users with fun in this, the Work half or 1/4 of her time for Wood-Mizer Germany can Spend information and sapport with real working praktice... youtube.com/@WolfgangR75 ❤️... And Wood-Mizer Germany hast a high Kontakt with Wood-Mizer Europe and W-M poland, the European Produktion Line is in poland... So the sapport ist realy great for little sawmills without Hydraulik, many UA-camr Spend the information an all Backup from Wood-Mizer... Lt 20 and 40 also increadible Backup... Lt 70 and akkuset 2 ist seldom, but you became also good Backup... But Not so much working praktice informations from other Users ... ( Europe has Bild and sell own Computer Setup near the akkuset (1/) 2 is a little better than akkuset, Name is PLC (1/) 2, In the beginning only for Elektrik Version E25 (18,5kw) or Others (11/ 15kw) And akkuset for Diesel and gasolineengienes... But from lt 10/ new lt 15start, lt 15, lt 20, and lt 40 using on Most Machines the sw 10 Computer, PLC or akkuset is more expensive, and Not all Users Like To Use complex systems, sw 10 ist simple, can many Things, in 30 min you can Work with IT in good Style, only Problem, you can max 2 or 4? Setups for cutting, Rest is Manual Input in Numbers... Or Start new sitze in Programm... Akkuset or PLC can Use 16 sitzes in 3 Programm Modi, all Programm Mod Stands allone, down, Up, ant pattern are separate, 16x3 sitzes + Manual... I Wish you success and a good time and waiting in Hope with happieness of new Videos from your space... Greatings from Germany David
ua-cam.com/video/COGhNecFTPo/v-deo.html This is a Konstruktion from the Wood-Mizer Area worker/ sawmill User in 40km away from us, he have a Idea for this... And build IT on own Power and sapport from Friends...
@@jott5940 I had not heard of the PLC setworks company. I’ve always had great luck with the Wood-Mizer accuset that the mills come with. Here in America Woodmizer support is the best option in sawmill support. They have treated us so well. I checked out the link with the guys logging on that Polaris. That’s fun to see those guys working with what they have available. Do y’all have hardwood in your area? Do most people in Germany prefer Woodmizer?
Hey Buddy, I Had write to you 1 day later after your answer a Letter..., I need 1,25h and in the Moment i sende To you, IT get lost 🙈🙈😭😭😭😭 I have only the Last Part (1/6) of this , the Rest i need to write IT new... If i Look To your bisness Internet Adress, and used the bisness Mail, ist this the Kontakt To you, or a other Person at your Work/ bisness?
I need to find a conveyor like yours to set up and cut inside. Keep the vids coming they are great.
What’s your setup like now? Do you have electric? We just installed one of the Woodmizer versions at another site.
www.serra-sawmills.com/wp-content/uploads/SL-Bavaria-Schneidwerk_01.jpg
@@jott5940 I’ve never heard of that brand. You have one in action?
No, i don't have it, but i've See IT 3 Times in Action, but 2 are in the area, 20 - 35km away, one mill have do a Job in the nabour-village 2,5km away every jear...
Bet my lt15 give that 70 a run for its money! That mill is no joke though. Ive never seen one run thats impressive. Nice job
You hustle on your 15?
Thanks I appreciate it!
That Lt70 sure is nice. That beats the heck out of walking along with the saw head and dragging boards off by hand on my Lt35.
We have a guy that saw’s for us with a woodmizer you walk with. He’s had for 15 years we can’t convince him to get a 70. I couldn’t imaging even going back to being attached to the mills. The super 70 is a game changer.
@@americandream_89 I bought mine new in 15. It's been a tough little mill. Just like to have more production. Videos like yours make me want to trade up. Woodmizer told me back in October it was an 18 mo. Wait on one like yours though.
@@sawdustsandwichesandsweett9521 I’ve got a feeling in about 3-6 months you will be able to find them much easier.
Hey I run a lt70 as well but currently it’s not running correctly. It runs full power for about 15-20 minutes from cold. Then just slows down to about 2/3 power, very slow. Has a few engine codes, which are
522574 - DPF
3719 - DPF Operator Interface
3251 - DPF Differential Pressure Sensor
1485 - Main Relay
Wondering if you had any experience with this or had any advice, thanks
Our 22 model did the same thing or at least similar and it had a pinched wire in the loom, took us forever to find it. Have you contacted Woodmizer with this issue?
You can hang a 20l or 40l bucket on the sawdust ejection with the carrying handle, in between joints they preferably a 66 degree pipe elbow a... This works perfectly, lowest cost, hardly takes up any space, after 1 to 3 logs they empty the bucket into a tank / barrel / trailer or wherever they want to go... Alternatively, you can attach a container with dumping function as in 'Serra sawmills'... Then always empty at the beginning or end of the cut... Best use of space and material flow possible in all directions around the sawmill
Yeah I’ve seen many use a bucket 🪣
Back before we had electric and put in a conveyor. I had a Hugh box I had fabricated and we would shovel everything in it at day end. Then take the loader and empty in dust pile out back.
www.serra-sawmills.com/wp-content/uploads/SL-Bavaria-Schneidwerk_01.jpg
Man the lt 70 is sure cutting fast.
When did you change your log deck, seems like it used to be a little different, and are you using any lubricant?
I’m always checking blade wheel/belt tension it really makes a difference on these mills. We swapped the steel beam deck out about 8-9 months back. Currently I’m using radiator fluid and water. I prefer diesel but when it’s $5 a gallon it’s wasted money.
How many pressure do you Use on the Blade?
@@jott5940 I usually run between 85-90 on the air bag.
Hey dear Lt 70 owner,
Thanks for your new Wood-Mizer sawmill Video ‼️
This is Welcome to evryday, but at Christmas more,
Ist 1 of the Things IT make me Happy 👍👍‼️
Follow your Channel only To See the Things around the Logjard and my Special-Favorit ist the Things round the Wood-Mizer Lt 70...
We bye and start self in the Last month with a Lt 70 Standard (produktionyear 2007/ in realy good shape)
I will say thanks To share your informations and Videos with us!
Your Style tho Produce and Mix the Sound ist the best i ever See (can hear the Sound of Produktion, Most time nice Musik, and your speaking comments are great, and If your dont say anything i Like IT Same ...
You have Help me in a realy Big Level handle and Anderstand the Lt 70
Thanks for this and i Hope you Produce and share more of this🙏🙏
I think If your include the Name Wood mizer in the Video-Name, your Channel became more visits and follower, what the Channel whit the best Wood-Mizer Videos in my opinion deserve!!!
Wish you, your Channel and Family the best ‼️,
And blessed nice Christmas-Days with your Family
Greatings from (East-) Germany
David
Truly appreciate your support and time.
I hope you and your family had a great Christmas together. I’ve got family in Germany 🇩🇪
I’m working on more videos around the mill. Hopefully I’ll continue to help you and others out. Your correct the videos do better with the word Woodmizer in title.
Congrats on the mill. They are a great source of income. How’s finding help in Germany?
Thanks for all your input!
Yes, your Support hast Help me To Unterstand for what we neues to looking for at the time WE Bye the mill, and To See, what need the mill, and what a Type of Wood-Mizer we will bye...
Lt 70 is seldom...
Most with Hydraulik ist lt 40, and lt 20 coming in the Last years with many Machines Up...
Thanks for your great wishes❤️
Nice To hear from your Family Part in Germany, your Welcome ‼️
Support in Germany or Austria ist Spend from Wood-Mizer Germany with all areas (parts, sawmill band sharpeners - for complete area of Germany and Austria and they Support the sharpening also for other sawmills fabrikates, repair Personal can you Kontakt direktlie, or the selling and Rest of Theam..., Lokal wandering sawmill Users with fun in this, the Work half or 1/4 of her time for Wood-Mizer Germany can Spend information and sapport with real working praktice... youtube.com/@WolfgangR75 ❤️...
And Wood-Mizer Germany hast a high Kontakt with Wood-Mizer Europe and W-M poland, the European Produktion Line is in poland...
So the sapport ist realy great for little sawmills without Hydraulik, many UA-camr Spend the information an all Backup from Wood-Mizer...
Lt 20 and 40 also increadible Backup...
Lt 70 and akkuset 2 ist seldom, but you became also good Backup... But Not so much working praktice informations from other Users ...
( Europe has Bild and sell own Computer Setup near the akkuset (1/) 2 is a little better than akkuset, Name is PLC (1/) 2,
In the beginning only for Elektrik Version E25 (18,5kw) or Others (11/ 15kw)
And akkuset for Diesel and gasolineengienes...
But from lt 10/ new lt 15start, lt 15, lt 20, and lt 40 using on Most Machines the sw 10 Computer, PLC or akkuset is more expensive, and Not all Users Like To Use complex systems, sw 10 ist simple, can many Things, in 30 min you can Work with IT in good Style, only Problem, you can max 2 or 4? Setups for cutting, Rest is Manual Input in Numbers... Or Start new sitze in Programm...
Akkuset or PLC can Use 16 sitzes in 3 Programm Modi, all Programm Mod Stands allone, down, Up, ant pattern are separate, 16x3 sitzes + Manual...
I Wish you success and a good time and waiting in Hope with happieness of new Videos from your space...
Greatings from Germany
David
ua-cam.com/video/COGhNecFTPo/v-deo.html
This is a Konstruktion from the Wood-Mizer Area worker/ sawmill User in 40km away from us, he have a Idea for this... And build IT on own Power and sapport from Friends...
@@jott5940 I had not heard of the PLC setworks company. I’ve always had great luck with the Wood-Mizer accuset that the mills come with. Here in America Woodmizer support is the best option in sawmill support. They have treated us so well.
I checked out the link with the guys logging on that Polaris. That’s fun to see those guys working with what they have available.
Do y’all have hardwood in your area?
Do most people in Germany prefer Woodmizer?
Hey Buddy,
I Had write to you 1 day later after your answer a Letter..., I need 1,25h and in the Moment i sende To you, IT get lost 🙈🙈😭😭😭😭
I have only the Last Part (1/6) of this , the Rest i need to write IT new...
If i Look To your bisness Internet Adress, and used the bisness Mail, ist this the Kontakt To you, or a other Person at your Work/ bisness?
I hear the motor pulling down how much horsepower is that motor
55hp you want the motor to pull down
What does pallet material usually bring per board foot?
Really depends. But between .40-.65 currently. You can buy the logs for between .15-.40 depending on if it will make a tie log.
What blades are you running ?
747 turbo