Why can’t every gun video be like yours? Clear, concise, no BS, just what you need to know exactly. I just bought my first Sig Sauer and yep it was the P320 AXG Classic. I took out the striker assembly after my first range session, but definitely didn’t want to disassemble it without watching a how to video. I got lucky and found your video first. Perfect… thank you for making this available for us.
I shot films professionally for 18 years. I wish all informational videos were like this! Well done! I just got my P320 today and have only torn down Glock’s and Colts in the past. This taught me everything I need to know and why I need to know it. Keep up the good work!
My name is Sgt. Peter Dominguez military retired US Marine Corps and Vietnam Veteran. I found very interesting video how to assembly and disassembly the P30 Sig Sauer the fire pin assembly, I did learn a lot by watching this nice and very clear video and was able to assembly the fire pin. I am appreciated this constructed video very much, without this video I wasn't able to have it done myself putting together my project, thank you very much, "Semper Fi" Oorah!
Wow! Well explained step by step instruction. Really appreciate how you explained how the parts go with each other including the orrientation on how each part goes back in.
Could not install striker assembly because safety lever was leaning out. Happened 2x. Thanks to your video, i just had to move the spring and it popped back into place. Excellent video - thanks.
Sig Sauer Guy quick question if you wouldn’t mind... I will be getting a can of Rem DriLube to try it out, but I was wondering if you used any particular product during the actual cleaning of the striker assembly. Thanks man.
7:35 it always amazes me of the “little” things (pieces) that are involved in making a gun fire & work correctly. That little spring is something I’m probably gonna lose, the first few times of cleaning the striker; so I’m gonna make sure to buy some extras to have on hand. That’s a good tip you gave in your deep cleaning Vid; always try to have 1-3 extra spare parts on hand, so if something happens; your not sending gun in to be serviced & waiting (or waiting to have parts delivered), you can grab the spare & be up in running in seconds👍🏻 8:23 THANK YOU for your attention to detail & explaining things really clear & concise & then showing us. Fantastic 👍🏻, as that was a question I had, if mattered which way the “V” striker safety spring went in; & then you answered it when reassembling everything. Do wish you could have zoomed in on the spring in post at 9:34; so we’d have a better view...but a minor thing really. Regardless, thx again for being clear to what you meant when describing a situation, & then showing us, really does make for an awesome video💥 Thanks for the vid, appreciate the info & hard work it takes to make a video like this🙏🏼 All the questions I had before watching this, are now gone; as you answered everyone of them. Like the p320 mat you have there, it’s pretty sick looking Cheers✌🏼
A very touching comment. I really appreciate positive feedback and criticism both good and bad. Comments like there’s help me make the next video even better. I really appreciate this. Thank you very much.
Hell yeah brutha now I can do this. Your videos now have taught be how to break apart my entire 320 from top to bottom. The Skelton trigger was a bitch getting on with the up over out trick because the Skelton trigger has that protrusion on the top of the shoe but after 30 minutes I was able to do that too. It just had to be in the perfect position. This was much easier. Can’t thank you enough man
Took me a few to see that you put the safety lever on before you put the firing pin back into the housing to put the two leg spring in the notch to lever
I have ammo that has been “light striking” I swore it was the ammo, but after cleaning I believe it was the fouling. I will test it when I can, thanks for the video!
Fascinating video. I am a bit surprised that this gun met the military's criteria for selection, though ... the drop safety mechanism on the striker seems very complex.
I took my striker out cleaned it with Lucas gun cleaner spray it’s kinda like break clean. It removed all of the oil and carbon with a couple sprays. But when I put the gun back together and did some function checks the gun was failing to go into battery. The striker was catching on the sear like intended to but was stopping the gun from fully going into battery. Tried everything nothing worked except when I put a little CLP on a qtip and wiped the inside of the striker housing not channel, after doing so gun functioned perfectly. Long story short don’t use a cleaner that is like brake clean and turns all the grease into a dry film that makes ur striker unit not work properly and get stuck on the sear.CLP SOLVES EVERYTHING
Hola, compre una sig p320 hace poco, es una maravilla tu canal, no había encontrado mejores explicaciones que las tuyas, gracias a tus videos mantengo limpia y operativa mi arma, repito, lo mejor que he visto en I net, claro, preciso y muy educativo, saludos desde Chile
This is a fantastic video! Thank you very much for the details, good camera/focus and lighting. When cleaning the striker assembly, could I just sort of brush it down with something like breakthrough cleaner without removing all the tiny parts too?
Who does all of your paint jobs? They’re some of the cleanest I’ve seen. A lot I see you can very clearly see where the stencil was and a big thick layer not flat and smooth with the rest of the coating.
On mine, the striker doesn't really get dirty. I have never disassembled it(well over 10,000 rounds fired). Occasionally I'll through it in the ultrasonic cleaner along with everything except for the barrel, and rinse(barrel gets cleaned with patches and bore solvent). Then I give everything an ultrasonic bath in Lyman Turbo Sonic Gun Lube to remove water and leave a lubricant film on everything. Then oil only those parts that Sig says to lube(barrel, slide, and recoil spring). I use a silicone gun cloth on the exterior of the slide to make it look nice.
If it works for you then I wouldn’t change a thing. I reload so I have an ultrasonic cleaner as well. For me it doesn’t get everything completely clean.
Awesome video, I've never bothered to remove the striker assembly well... because it says flat out not to in the book lol. I pride myself on keeping my guns clean but I'm sure this part is caked since it's never been touched. Maybe a dumb question... but since it's just one peice couldn't you just blast it with some parts cleaner, dry it off, clean the channel and reassemble and get a good result? I'm afraid my sausage fingers will loose those micro sized springs.
Tony A my name has nothing to do with this pistol being adopted by almost the entire military and who knows how many law enforcement organizations. You are not a fan. Duly noted.
Thank you very much for your detailed video! I was cleaning it, and detected the tiny spring that I had no idea where it came from... :) ... Thanks!!! Do you lube your guns? I pretty much don’t , at least a glock type strikers.... Not sure it is right...
Btw, never admit to sig that you took the striker out and apart if you ever need warranty work done. Owner's manual says doing this voids your warranty. Even though if you were to press them hard enough you could get them to warranty it anyways because having potentially unsafe guns out there is not a good look for any manufacturer.
Hey Sig Guy, thanks for your content, it’s much appreciated. I bought a back up striker assembly and recoil spring assembly recently, the latter I had to get on eBay and paid twice the suggested retail but I wanted to have both just in case. I do a lot of dry firing, that said if I keep my striker clean and free of grease and fouling how long can I expect it to last before I swap it out? I’ve done some reloading as of late with a new progressive Hornady AP that I thought made sense to get into and I’m using small rifle primers to substitute for small pistol as the latter is impossible to get and while I’ve had no issues yet I certainly want to avoid the potential for any and I’m wondering how long the striker assembly lasts. Thanks in advance and thanks again for your content. Your FCU assembly/disassembly videos were clutch when my trigger spring came off and I had no idea how to get it back on so sincerely, THANK YOU!
There’s no suggested replacement interval for the striker itself. The spring yes but not the striker itself. Just inspect and reuse if in good working condition.
great video. you anticipated all of my questions with one possible exception. based on how detailed you were, i'm assuming it doesn't matter, but when you were assembling the 2 halves, does it matter where the 2 halves meet (ie, at 12 o'clock/6 o'clock or 3 o'clock/9 o'clock)?
Great video. Always been a glock guy, but just purchased the p320 to replace my edc gun. How often would you recommend cleaning the striker and should I go ahead and clean the factory lube out of it?
Jason Lisenby I don’t thing there is such a thing as too clean. The striker is very easy to remove. Only takes a second to clean. Definitely clean before shooting for the first time. After cleaning awhile you will figure out what frequency works best for you.
Thank you but recently i have problems with that little spring when i assemble the spring the Disconnecter plate becomes loose do i have not enough tension anymore on that spring or is it broken , i cannot figure it out
New gun owner here-very good instructions with one exception-you cut out the cleaning process giving no information as to what you should and shouldn’t use for cleaning agents on the striker assembly.
Any experience on not going into battery the last 1/4”? A part of the striker seems to be grinding on something the last 1/4” or so. Common problem I’ve read all the forms online talking about it. No solution has worked
I am stuck. Every time I put the l safety lever back in with the spring, no issue. When I slide the firing pin in it lifts it up. I have tried putting the firing pin in first the the safety level and the same result. The spring and the level work as they should until I try to put the firing pin in. I seems to lift it up and knock it out. Tried 100 ties. I noticed it fell right off when I removed the whole firing pin assembly. Very frustrated!!
Ronald Bell I wouldn’t. I’ve used one to see how good it performed. Not good at all. Took more time and did half as good. I prefer to turn on the football game and complete disassemble, clean and reassemble. Relaxing to me and does a perfect job.
There are others that use that method. I’ve actually tried it several times basically to test it out myself. Doesn’t get nearly as clean as old fashion elbow grease.
Hey, how's it going? Big fan here.. particularly since my recent P320C purchase. [Almost 2 months ago] Been absorbing as much information as I can with handling and maintenance. Around 700 rounds in now and havent looked at the striker yet. At the beginning and end you mention every now and then you take it apart to clean it but how often (or after ____ amount of rounds) would you advise doing this? Sorry for the long comment/question 😅 I enjoy all of your content and thank you for your service.
Moof Fulgencio no worries at all on the question. I’m glad to help when I can. It’s really easy to remove. It really depends on frequency of shooting, ammo type and environment. Once you do it a couple times you will know if you can go longer or if more frequently is needed. It really only takes a few minutes so for me the more the better. Glad you are loving the 320.
@@SigGuy I appreciate the speedy response. About to get into it just to see what's going on. Right now its in the home or at the indoor range about every other weekend.. cwp soon. 🤔 I'd really like to make use of the conversion process at some point. Hopefully adopt your thorough approach along the way. Until then, thank you and I'll be studying.
@@SigGuy , What caused the P320 pistol in the LEO's holster to go off? I read that 3 LEO had their P320 go off, two had their P320 in their holsters when they shot on their own without touching the pistol, and the other when he dropped it. I know the dropped incident was due to the trigger being to heavy, but what about the two holstered P320?
@@SigGuy Are the new ones the two piece? My P365 has the two piece and the striker protrudes a lot further than my P365XL with the one piece. The striker barely protrudes with that one. I have not had any light strikes with my XL, but I have a hard time trusting it. I hate to buy a whole striker assembly and was hoping they just sold the cups like they do for the P320
all P320 striker is the same ??? I'm thinking of buying a full-size slide I want to know if the striker and the extractor case of a compact internally works on a full-size slide
Why is in necessary to put the striker in dry. It seems counter intuitive to me. It seems it would be good to have the moving parts lubed. Please excuse my ignorance.
KatManDoo lubing the striker needs to be squeaky clean to operate properly. Even assembly lube from the manufacturer has caused malfunctions. The striker doesn’t create friction that lube is necessary to minimize. The only stupid question is the one not asked.
You dont want gunk buildup in the striker channel (which does not have much free space), lube attracts and collects gunk, too much gunk can cause the striker to not move back and forth freely causing reliability problems.
Actually that’s not correct. I was thinking you were talking about the 365. If you’re talking about that little spring in the side I believe it’s the striker safety spring.
@@SigGuy Its the smallist spring in the intire gun... I didnt mean to say channel,its the spring that goes inside of the striker Housing... Im thinking after some research that it is called the "striker reset spring"
Why can’t every gun video be like yours? Clear, concise, no BS, just what you need to know exactly. I just bought my first Sig Sauer and yep it was the P320 AXG Classic. I took out the striker assembly after my first range session, but definitely didn’t want to disassemble it without watching a how to video. I got lucky and found your video first. Perfect… thank you for making this available for us.
I shot films professionally for 18 years. I wish all informational videos were like this! Well done! I just got my P320 today and have only torn down Glock’s and Colts in the past. This taught me everything I need to know and why I need to know it. Keep up the good work!
Bro you’re ‘The Man’ with this stuff. Your channel could not have a more appropriate name! Just so precise and clear! Thank you so much!
Your videos have helped me get really confident disassembling my X5, thank you for all the uploads.
Super valuable video here!
When SIG designed this thing, they were definitely not thinking "Keep it simple"
My name is Sgt. Peter Dominguez military retired US Marine Corps and Vietnam Veteran. I found very interesting video how to assembly and disassembly the P30 Sig Sauer the fire pin assembly, I did learn a lot by watching this nice and very clear video and was able to assembly the fire pin. I am appreciated this constructed video very much, without this video I wasn't able to have it done myself putting together my project, thank you very much, "Semper Fi" Oorah!
Top notch video. Excellent visual quality and directions.
This is a very educational video for sig p 320 owners. A lot was learnt
Wow! Well explained step by step instruction. Really appreciate how you explained how the parts go with each other including the orrientation on how each part goes back in.
Thank you for taking the time to post positive feedback. I really appreciate it. 🙏🏼
Just bought my first P320. Thanks for this video!
TXARmory congrats! Enjoy!!!
Could not install striker assembly because safety lever was leaning out. Happened 2x. Thanks to your video, i just had to move the spring and it popped back into place. Excellent video - thanks.
Excellent video, very helpful. Before watching this, I would never had tried this task.Thank you for this, I greatly appreciate it.
🙏🏼
Excellent video man. Straight to the point with just enough detail to cover everything needed.
GREAT job! Very informative with NO unnecessary chatter.
Concise to the point. Now I can break mine down for a deep clean.
Jim Whitaker thank you for the compliment sir! Really appreciate it.
Outstanding instructional video! One of the best I’ve encountered. Many THANKS!
Thanks much, I feel better about dissemble of the striker. The wheeler block is a must.:)
Wow thanks. Mine is my edc and it had body hair built up in around the striker. I didn't expect that
As a new Sig M18/P320 guy, love your channel...and the thunder in the background!
Super presentation. I really like learning more about how my 320 operates!
Thank you!
Great job!!! Many thanks from Montreal!!!
Super video sir! Precise, professional and to the point! Thanks!🤘
Thank you. 🙏🏼
My gun never was never will be as clean as yours. My sig wasn’t that clean even from the factory. Amazing
Outstanding video, thank you for this. You completely demystify these parts, which is extremely helpful.
Dude, best videos on UA-cam. Well detailed and explained. Plus your tips from experience are invaluable.
Mark Anderson thank you very much for the compliment. Glad you find them useful. Appreciate it sir.
Sig Sauer Guy quick question if you wouldn’t mind... I will be getting a can of Rem DriLube to try it out, but I was wondering if you used any particular product during the actual cleaning of the striker assembly. Thanks man.
Mark Anderson nope
I just wipe it down. Put it back in dry. That’s it.
@@SigGuy your videos are the best!
Where can i get a guide rod like yours?
Arturo Miramontes Springer Precision sells tungsten guide rods.
7:35 it always amazes me of the “little” things (pieces) that are involved in making a gun fire & work correctly. That little spring is something I’m probably gonna lose, the first few times of cleaning the striker; so I’m gonna make sure to buy some extras to have on hand. That’s a good tip you gave in your deep cleaning Vid; always try to have 1-3 extra spare parts on hand, so if something happens; your not sending gun in to be serviced & waiting (or waiting to have parts delivered), you can grab the spare & be up in running in seconds👍🏻
8:23 THANK YOU for your attention to detail & explaining things really clear & concise & then showing us. Fantastic 👍🏻, as that was a question I had, if mattered which way the “V” striker safety spring went in; & then you answered it when reassembling everything. Do wish you could have zoomed in on the spring in post at 9:34; so we’d have a better view...but a minor thing really. Regardless, thx again for being clear to what you meant when describing a situation, & then showing us, really does make for an awesome video💥
Thanks for the vid, appreciate the info & hard work it takes to make a video like this🙏🏼 All the questions I had before watching this, are now gone; as you answered everyone of them.
Like the p320 mat you have there, it’s pretty sick looking
Cheers✌🏼
A very touching comment. I really appreciate positive feedback and criticism both good and bad. Comments like there’s help me make the next video even better. I really appreciate this. Thank you very much.
Hell yeah brutha now I can do this. Your videos now have taught be how to break apart my entire 320 from top to bottom. The Skelton trigger was a bitch getting on with the up over out trick because the Skelton trigger has that protrusion on the top of the shoe but after 30 minutes I was able to do that too. It just had to be in the perfect position. This was much easier. Can’t thank you enough man
I have become a master sig armorer watching your videos lol. keep up the awesome work. Thanks
Thank you very much for your videos. They help a lot, I mean that.
Thank you for taking the time to leave feedback. I really appreciate it.
that weapon is tooooo clean!
Thank you! Excellent instructional video!!!
This makes me want to send my striker to you for cleaning. It looks so daunting. Amazing job at explaining it though. Thanks..
Very good explanation and video, good job, thank you
Took me a few to see that you put the safety lever on before you put the firing pin back into the housing to put the two leg spring in the notch to lever
I always wondered how that would go. Thank you very much!
I have ammo that has been “light striking” I swore it was the ammo, but after cleaning I believe it was the fouling. I will test it when I can, thanks for the video!
awesome video! Once again I was able to handle this with your help.
Thanks for a great video. You covered every aspect of assembly and it serve as a fantastic review for me. Again thanks...
Fascinating video. I am a bit surprised that this gun met the military's criteria for selection, though ... the drop safety mechanism on the striker seems very complex.
Thank you sir!
I been "friends" with you on Facebook for awile, but just found your UA-cam channel! Thanks for great content!
Thank you.
I took my striker out cleaned it with Lucas gun cleaner spray it’s kinda like break clean. It removed all of the oil and carbon with a couple sprays. But when I put the gun back together and did some function checks the gun was failing to go into battery. The striker was catching on the sear like intended to but was stopping the gun from fully going into battery. Tried everything nothing worked except when I put a little CLP on a qtip and wiped the inside of the striker housing not channel, after doing so gun functioned perfectly. Long story short don’t use a cleaner that is like brake clean and turns all the grease into a dry film that makes ur striker unit not work properly and get stuck on the sear.CLP SOLVES EVERYTHING
Hola, compre una sig p320 hace poco, es una maravilla tu canal, no había encontrado mejores explicaciones que las tuyas, gracias a tus videos mantengo limpia y operativa mi arma, repito, lo mejor que he visto en I net, claro, preciso y muy educativo, saludos desde Chile
Wow, great! Thank you for your help!! Best Regards from Germany :0)
That’s sig is sweet man I really dig the look 😎
Awesome video and Great Demonstration.Thanks 👍😎🇺🇸.
Great video and very detailed. I appreciate it
Great video
Thank you for the compliment. I really appreciate it!
excellent video !
This is a fantastic video! Thank you very much for the details, good camera/focus and lighting. When cleaning the striker assembly, could I just sort of brush it down with something like breakthrough cleaner without removing all the tiny parts too?
Awesome video...Much appreciated...
Thank you sir.
as soon as you said "dont loose it" to the safety spring. it shot across my room and i thought it was gone forever
🤣🤣🤣 sounds like you found it though. I have a tackle box full of new spare parts because of situations exactly like that.
thank you
Who does all of your paint jobs? They’re some of the cleanest I’ve seen. A lot I see you can very clearly see where the stencil was and a big thick layer not flat and smooth with the rest of the coating.
On mine, the striker doesn't really get dirty. I have never disassembled it(well over 10,000 rounds fired). Occasionally I'll through it in the ultrasonic cleaner along with everything except for the barrel, and rinse(barrel gets cleaned with patches and bore solvent). Then I give everything an ultrasonic bath in Lyman Turbo Sonic Gun Lube to remove water and leave a lubricant film on everything. Then oil only those parts that Sig says to lube(barrel, slide, and recoil spring). I use a silicone gun cloth on the exterior of the slide to make it look nice.
If it works for you then I wouldn’t change a thing. I reload so I have an ultrasonic cleaner as well. For me it doesn’t get everything completely clean.
Just bought a M17/M18 I'll have to check this out.
Great video!!!!!! Thanks for the close ups, really helps. Any lube needed in the slide workings,... Or dry? Thanks.
The striker is more complex compare to the glock. I had a difficult time installing the two cups on the glock. The Sig cups looks a little bigger.
You got my Vote! Thank you!
Awesome video, I've never bothered to remove the striker assembly well... because it says flat out not to in the book lol. I pride myself on keeping my guns clean but I'm sure this part is caked since it's never been touched. Maybe a dumb question... but since it's just one peice couldn't you just blast it with some parts cleaner, dry it off, clean the channel and reassemble and get a good result? I'm afraid my sausage fingers will loose those micro sized springs.
Thank you! Great video, helped me resolve me issue.
Thank you for the great feedback. Nice work bud.
This is why I sold all 320s .. design is so well fragile
Yet just about all of the US military and many many many law enforcement outfits adopted it. 🤷🏻♂️ Intricate yet dependable.
@@SigGuy ok. I think your name says it all. You love them, great.
Tony A my name has nothing to do with this pistol being adopted by almost the entire military and who knows how many law enforcement organizations. You are not a fan. Duly noted.
Thank you very much for your detailed video! I was cleaning it, and detected the tiny spring that I had no idea where it came from... :) ... Thanks!!!
Do you lube your guns? I pretty much don’t , at least a glock type strikers.... Not sure it is right...
great shit loved it
Btw, never admit to sig that you took the striker out and apart if you ever need warranty work done. Owner's manual says doing this voids your warranty. Even though if you were to press them hard enough you could get them to warranty it anyways because having potentially unsafe guns out there is not a good look for any manufacturer.
Just wondering what’s the price for that paint job? Nice gun. Great videos. Very helpful.
Have you ever used Patmos Slide Completion Parts? Just wondering how they compare vs Sig OEM or Grey Ghost Precision assemblies… 🤔
Great video!!!
Which threaded barrel is that and how does it run suppressed? Do you run it suppressed?
Geez louise! Is the design susceptible to malfunctions? Seems like a lot of potential for it.
Great video. Thanks
Hey Sig Guy, thanks for your content, it’s much appreciated. I bought a back up striker assembly and recoil spring assembly recently, the latter I had to get on eBay and paid twice the suggested retail but I wanted to have both just in case.
I do a lot of dry firing, that said if I keep my striker clean and free of grease and fouling how long can I expect it to last before I swap it out? I’ve done some reloading as of late with a new progressive Hornady AP that I thought made sense to get into and I’m using small rifle primers to substitute for small pistol as the latter is impossible to get and while I’ve had no issues yet I certainly want to avoid the potential for any and I’m wondering how long the striker assembly lasts.
Thanks in advance and thanks again for your content. Your FCU assembly/disassembly videos were clutch when my trigger spring came off and I had no idea how to get it back on so sincerely, THANK YOU!
There’s no suggested replacement interval for the striker itself. The spring yes but not the striker itself. Just inspect and reuse if in good working condition.
Is that a 9mm chamber brush..? Thank You for doing these videos, you the man..! 👍🍻🇺🇸
Yes sir. 9mm bore brush.
@@SigGuy Thanms man…. Doing some shopping on your website now…. AC Trigger and a couple springs…. Love your channel..!
@@stacks4943 thank you! 🙏🏼
great video. you anticipated all of my questions with one possible exception. based on how detailed you were, i'm assuming it doesn't matter, but when you were assembling the 2 halves, does it matter where the 2 halves meet (ie, at 12 o'clock/6 o'clock or 3 o'clock/9 o'clock)?
Doesn’t matter at all bud. Thanks for the great question. 🙏🏼
excelente!!!!! muchas gracias por tu aporte
Great video. Always been a glock guy, but just purchased the p320 to replace my edc gun. How often would you recommend cleaning the striker and should I go ahead and clean the factory lube out of it?
Jason Lisenby I don’t thing there is such a thing as too clean. The striker is very easy to remove. Only takes a second to clean. Definitely clean before shooting for the first time. After cleaning awhile you will figure out what frequency works best for you.
Thank you but recently i have problems with that little spring when i assemble the spring the Disconnecter plate becomes loose do i have not enough tension anymore on that spring or is it broken , i cannot figure it out
Spring cups r now 1 singular piece!
Yup but 2 piece designs and cups are still out there.
Any malfunctions with that guide rod and spring ? Is it for under powered ammo or anything?
New gun owner here-very good instructions with one exception-you cut out the cleaning process giving no information as to what you should and shouldn’t use for cleaning agents on the striker assembly.
Hi sir. Clean with anything. Reassembly dry. No lube at all. Spotless.
all great videos also where did you get that magnetic pick
Yup I had a 1 piece retainer cup but I accidentally let go of the striker spring and launched it into orbit never to be seen again
Hey there Sig Guy - another Sig fan here in Australia with an P320 X5 - can you please tell who/what make that barrel is please?
Can this gun working normally without striker reset spring?????
Is it ok to buff and polish all that?
Any experience on not going into battery the last 1/4”? A part of the striker seems to be grinding on something the last 1/4” or so. Common problem I’ve read all the forms online talking about it. No solution has worked
I am stuck. Every time I put the l safety lever back in with the spring, no issue. When I slide the firing pin in it lifts it up. I have tried putting the firing pin in first the the safety level and the same result. The spring and the level work as they should until I try to put the firing pin in. I seems to lift it up and knock it out. Tried 100 ties. I noticed it fell right off when I removed the whole firing pin assembly. Very frustrated!!
The 2 piece cups are still plastic but it’s a single piece now.
Correct.
I experienced alot of problm while fring with sig sauer p320.i hope its a problm of weak firing pin and lots of missed bullet.Can anyone help me out?
What iron sights are those?
Great Video! Thanks-would you recommend a sonic cleaner after disassembly? Just a thought
Ronald Bell I wouldn’t. I’ve used one to see how good it performed. Not good at all. Took more time and did half as good. I prefer to turn on the football game and complete disassemble, clean and reassemble. Relaxing to me and does a perfect job.
Can I just throw the whole striker assembly in a sonic cleaner to clean it without disassembly?
There are others that use that method. I’ve actually tried it several times basically to test it out myself. Doesn’t get nearly as clean as old fashion elbow grease.
Where can I get the upgrades
How do you remove the LCI on p320 x full?
See if this helps…..
ua-cam.com/video/1l9ruG0RauA/v-deo.html
@@SigGuy
You're the GOAT bro thanks.
I got it! 👍🏾👍🏾👍🏾👍🏾
Hey, how's it going? Big fan here.. particularly since my recent P320C purchase. [Almost 2 months ago] Been absorbing as much information as I can with handling and maintenance. Around 700 rounds in now and havent looked at the striker yet. At the beginning and end you mention every now and then you take it apart to clean it but how often (or after ____ amount of rounds) would you advise doing this? Sorry for the long comment/question 😅 I enjoy all of your content and thank you for your service.
Moof Fulgencio no worries at all on the question. I’m glad to help when I can. It’s really easy to remove. It really depends on frequency of shooting, ammo type and environment. Once you do it a couple times you will know if you can go longer or if more frequently is needed. It really only takes a few minutes so for me the more the better. Glad you are loving the 320.
@@SigGuy I appreciate the speedy response. About to get into it just to see what's going on. Right now its in the home or at the indoor range about every other weekend.. cwp soon. 🤔 I'd really like to make use of the conversion process at some point. Hopefully adopt your thorough approach along the way. Until then, thank you and I'll be studying.
Never had a striker malfunction. Never even heard of anyone else having one.
Didn't the P365 have strikers breaking at one point?
@@SigGuy , What caused the P320 pistol in the LEO's holster to go off? I read that 3 LEO had their P320 go off, two had their P320 in their holsters when they shot on their own without touching the pistol, and the other when he dropped it. I know the dropped incident was due to the trigger being to heavy, but what about the two holstered P320?
who does your Cerakote jobs?
When should I replace striker? Round count?
Are the cups at 3:18 the same for the p365xl? I'm looking to replace my one piece cup with the 2 piece cup, but the only cups I find are for the p320.
They are not but I sell complete striker assemblies on the website if you are interested.
@@SigGuy Are the new ones the two piece? My P365 has the two piece and the striker protrudes a lot further than my P365XL with the one piece. The striker barely protrudes with that one. I have not had any light strikes with my XL, but I have a hard time trusting it. I hate to buy a whole striker assembly and was hoping they just sold the cups like they do for the P320
all P320 striker is the same ???
I'm thinking of buying a full-size slide I want to know if the striker and the extractor case of a compact internally works on a full-size slide
Correct. All the same.
@@SigGuy thax man
Only i what to used the stiker and the extractor
Why is in necessary to put the striker in dry. It seems counter intuitive to me. It seems it would be good to have the moving parts lubed. Please excuse my ignorance.
KatManDoo lubing the striker needs to be squeaky clean to operate properly. Even assembly lube from the manufacturer has caused malfunctions. The striker doesn’t create friction that lube is necessary to minimize. The only stupid question is the one not asked.
You dont want gunk buildup in the striker channel (which does not have much free space), lube attracts and collects gunk, too much gunk can cause the striker to not move back and forth freely causing reliability problems.
Great video but please,what is the name of the tiny spring that goes inside the sticker channel?..Thank You
Ellis Smith Jr I’m not sure what the technical name of it as it is sold with the striker assembly.
Actually that’s not correct. I was thinking you were talking about the 365. If you’re talking about that little spring in the side I believe it’s the striker safety spring.
@@SigGuy
Its the smallist spring in the intire gun...
I didnt mean to say channel,its the spring that goes inside of the striker Housing...
Im thinking after some research that it is called the "striker reset spring"