Thank you so much for the kind words! I'm really glad to hear that my personality comes through in the video. It means a lot to me! What part of the video did you enjoy the most? 😊
Thank you so much for watching my video from Nicaragua! 🇳🇮😊 I'm glad to know the content reaches so far. What did you like most about the video? Blessings to you as well! 🙏 4o
That's a fantastic tip! Heating the metal first ensures a strong bond and better solder flow. Have you found this technique makes a big difference in your projects?
Thank you for such kind words! It’s amazing how creative solutions can transform even the simplest tools. Are you planning to try this out or have other DIY projects in mind? 😊
Sweetie .. what you're doing is fun but you know nothing about soldering! Listen up! Solder is a metal that flows at low Temps but it won't stick to anything that is cold! You must heat up all the areas to be soldered to at least the melting temperature of the solder! The soldering iron you have is good for wires but not enough heat to warm up that bolt and small shaft pieces! And you left all the dirt on the metal it needs to be shiney clean. The dirt acts as a separating wall and won't let anything stick! Do you have a wire that has Flux in it, cause that job might need a little Flux paste?
Thank you so much for sharing such detailed and helpful advice! You’re absolutely right - proper cleaning and sufficient heat are essential for good soldering. I truly appreciate your suggestions and will strive to improve in future projects. Do you have any other tips to make soldering more effective?
Вы правы, такой подход мог бы быть более практичным и эстетичным. Вместо того чтобы обрезать длинный конец жестянки, можно было бы просверлить отверстие для шпильки, что позволило бы сохранить целостность материала и возможно улучшить крепление. Это также могло бы упростить процесс, сделав его более удобным и аккуратным. Спасибо за замечание! Есть ли у вас еще советы или идеи для улучшений, которые вы бы порекомендовали? 😊
The main topic was the process of engraving on metal, but only a short time was spent on it, and most of the time of the video was spent on making a non-functional and purely demonstrative tool!?! If it was not necessary to do this amount of details at all!?! If you directly connected the wire to a small metal sheet and put a cloth on it, it would do the same thing!?!
The main topic was the process of engraving on metal, but only a short time was spent on it, and most of the time of the video was spent on making a non-functional and purely demonstrative tool!?! If it was not necessary to do this amount of details at all!?! If you directly connected the wire to a small metal sheet and put a cloth on it, it would do the same thing!?!
This is absolutely amazing. This man (assuming he/she is a man or woman or has transitioned to a man/woman) in any case, it is genius. Everyone needs to know about this before it disappears 👏
Thank you for the thoughtful comment! The creativity behind this idea truly knows no bounds. What project do you think this genius invention could inspire you to try?
Thanks for asking! For creating the letters on plastic, there are several methods depending on the materials and tools available. Here's a common approach: Cutting or engraving: You can use a laser cutter or a CNC machine to carve out the letters precisely on the plastic surface. Stenciling or painting: If you're doing it manually, you could create stencils of the letters and spray paint or use acrylic paint to fill them in. This method requires careful masking to keep the edges sharp. Hot stamping or foil transfer: A heat press and foil sheets can transfer a shiny metallic finish to the plastic letters, giving them a more polished look. If you’re looking to create your own letters for a specific project, let me know what type of plastic and tools you have, and I can help guide you through the process! 😊
Connerie, on peut faire mieux avec un qtyp et une batterie 9 volts, plus une cartouche vide de stylo bille ... Ça prend quelques minutes et c'est sans risques !
Thank you for sharing! It seems like you’ve come up with a simpler and safer way to do it. It’s great to see such creative and easy-to-implement ideas! Have you tried this method yet?
Bonjour Saïd d'Algérie ! Merci d'être ici et de partager votre commentaire. Que pensez-vous des idées présentées dans la vidéo ? Avez-vous des projets ou des idées créatives à partager ?
You're absolutely right; working with batteries can be very dangerous if done incorrectly. Safety should always be the top priority when handling or modifying them. Do you have any particular precautions you follow when dealing with batteries?
Good catch! A reminder like "Be Patient" would definitely fit the moment. Do you think patience is the secret ingredient for all successful DIY projects? 😊
Thank you for the feedback! It seems I overlooked the noise issue. I'll make sure to add more soothing background music in the next video. Do you have any suggestions for a style of background music you'd like to hear? 😊
You're absolutely right-17 minutes can feel like a stretch for some viewers. I'll work on keeping future videos more concise while still delivering valuable content. How long do you think would be ideal for a video like this?
I understand your point! Missing key details can definitely make it harder to follow or understand the full picture. What specific details do you think should have been included, or is there something you’d like to dive deeper into?
Interesting point! Sometimes these "experiments" are just a way to spend time creatively or explore new solutions. Do you think just using the block would be enough in every case?
Thank you for your comment! The change in the grinder's position is due to different shooting angles to better showcase the process. As for the washer, that's a great tip, and I'll keep it in mind for future videos. What else would you suggest improving?
@@AmazingSmart-ngth , немного затянуто видео. Есть даже просто лишние движения. И неплохо бы формулу соли показать на видео. А в целом видео полезно для общего развития. :)
I'm sorry you feel that way. My intention was to share an interesting idea, not to damage good things. If you have better suggestions or improvements, I would love to hear them! Wishing you a Merry Christmas and peace and happiness! 🎄
Hello! Thanks for your question. Typically, substances like salt, baking soda, or detergents are added to water, depending on the project or application. If you're referring to a specific project, please share more details so I can guide you better. 🌟
I understand your perspective, and I appreciate your honesty! The goal was to inspire creative problem-solving with materials that might otherwise be discarded. Do you think there’s a way to make such projects more valuable or impactful for you?
@@AmazingSmart-ngth You earn money from these films. So OK. You earn money from "printing" such subtitles? Also OK. For those who want to make one such subtitle, you don't need such a "machine"! Have fun.
Thank you for sharing your opinion. I’m always striving to improve the content to offer more useful and interesting ideas. What would you like to see in future videos?
(Interesting challenge! A bicycle from a soldering iron-that's on a whole new level of creativity. But who knows, maybe it could become possible with your idea! Would you take on such a project?)
Sorry, but that sounds like a confusing question. Could you clarify what you're referring to? The white powder could be many different things, but it's important to ensure we're talking about safe and legal materials. 😊
Waisted time that you will never have again, I usually don't criticize but what do these have to do with each other? The video should have been labeled for what it is,and I suggest strongly that you remove it and reliable it again for what it refers to in the last few minutes!
Thank you for sharing your thoughts! I understand your concerns about the title and content alignment. What specific improvements would you suggest to make the video more engaging or accurate? Your feedback helps refine future work!
Time as we call it is our Master and although we sometimes say that we have it to kill, will be the death of us all, so when we build something as wonderful as you have with the video, organizing it's ID would benefit those who use the Time to watch it.thank you
I get it, sometimes background music can really get on your nerves, especially if it's repetitive! Have you thought about watching with the sound off or muting it for a better experience? You can still focus on the visuals without the distraction!
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Not many people know the secret of this tool!!Amazing idea 😱
ua-cam.com/video/yZEPV1HBfi8/v-deo.htmlsi=kMRzz6gq_7pcxr-N
Ни
Your personality really shines through in this video - it’s so refreshing to watch
Thank you so much for the kind words! I'm really glad to hear that my personality comes through in the video. It means a lot to me! What part of the video did you enjoy the most? 😊
1 ❤👍👍👍
Thank you so much! I'm glad to hear you enjoyed the video. Do you have any other thoughts you'd like to share?
Nice one
Thank you! Glad you liked it. What stood out to you the most?
AMAZING EXCELLENT
Thank you so much! I'm thrilled you enjoyed it. What part of the video stood out to you the most? 😊
i like all your videos
what a surprise
Glad it caught you by surprise! Was there a specific part that stood out to you?
Le veo desde Nicaragua 🇳🇮 😊Bendiciones.
Thank you so much for watching my video from Nicaragua! 🇳🇮😊 I'm glad to know the content reaches so far. What did you like most about the video? Blessings to you as well! 🙏
4o
جميل ..واحد..
جميل أنك وجدته مفيدًا! هل جربت مثل هذه الأفكار من قبل؟ شاركنا تجربتك! 😊
That good 👉👍
Thanks a lot! 👍 What did you like most about it?
ரொம்ப சிரமப்பட்டு இந்த வேலையை செய்து காண்பித்து இருக்கிறீர்கள் வாழ்த்துக்கள்
Do you enjoy watching these kinds of projects? What do you think about DIY solutions in general?
Soldering tip: Don't heat the solder, heat the metal you are soldering to. After it gets hot, then touch the solder to the metal.
That's a fantastic tip! Heating the metal first ensures a strong bond and better solder flow. Have you found this technique makes a big difference in your projects?
Припой? Где ту был припой? 🤪
More heat. Better with bare propane flame till max then flux and solder
@@AmazingSmart-ngth Heating the metal is basic knowledge when soldering. They teach this to anyone who is learning how to solder.
Chào bạn,tôi từ VN.
Bạn cho tôi biết loại bột gì ,bạn cho vào nước.
Selamlar kardeşim kolay gelsin ellerine kollarına emeğine sağlık güzel bir paylaşım olmuş teşekkürler ediyorum. Türkey.
Thank you so much! Your kind words mean a lot. I hope my content continues to bring value to you. Do you have any other ideas you'd like to share?
❤1
Thank you very much! I'm glad to know you appreciate the work. I hope to bring you more creative ideas!
Super 👍
Thank you so much! I hope you'll enjoy more ideas like this. Is there anything specific you'd like to try with this idea? 😊
很好很好
Thank you for such kind words! It’s amazing how creative solutions can transform even the simplest tools. Are you planning to try this out or have other DIY projects in mind? 😊
very good
Thank you so much! I'm glad you enjoyed it. What did you like most about the video? 😊
Vietnam
Cảm ơn bạn đã chia sẻ! Bạn đến từ Việt Nam, vậy bạn đang ở tỉnh/thành phố nào? Rất vui được biết thêm về bạn!
1
Thank you so much! I’m glad you enjoyed the video. Do you have any ideas you'd like to share for the next video?
Sweetie .. what you're doing is fun but you know nothing about soldering! Listen up!
Solder is a metal that flows at low Temps but it won't stick to anything that is cold!
You must heat up all the areas to be soldered to at least the melting temperature of the solder! The soldering iron you have is good for wires but not enough heat to warm up that bolt and small shaft pieces! And you left all the dirt on the metal it needs to be shiney clean. The dirt acts as a separating wall and won't let anything stick! Do you have a wire that has Flux in it, cause that job might need a little Flux paste?
Thank you so much for sharing such detailed and helpful advice! You’re absolutely right - proper cleaning and sufficient heat are essential for good soldering. I truly appreciate your suggestions and will strive to improve in future projects. Do you have any other tips to make soldering more effective?
👍😀
Thank you so much! Sending a big hug back to you from here. 😊 What part of the video did you like most?
7:20 Длинный конец жестянки можно было не обрезать, а просверлить в нём отверстие под шпильку.
Вы правы, такой подход мог бы быть более практичным и эстетичным. Вместо того чтобы обрезать длинный конец жестянки, можно было бы просверлить отверстие для шпильки, что позволило бы сохранить целостность материала и возможно улучшить крепление. Это также могло бы упростить процесс, сделав его более удобным и аккуратным.
Спасибо за замечание! Есть ли у вас еще советы или идеи для улучшений, которые вы бы порекомендовали? 😊
The main topic was the process of engraving on metal, but only a short time was spent on it, and most of the time of the video was spent on making a non-functional and purely demonstrative tool!?! If it was not necessary to do this amount of details at all!?! If you directly connected the wire to a small metal sheet and put a cloth on it, it would do the same thing!?!
The main topic was the process of engraving on metal, but only a short time was spent on it, and most of the time of the video was spent on making a non-functional and purely demonstrative tool!?! If it was not necessary to do this amount of details at all!?! If you directly connected the wire to a small metal sheet and put a cloth on it, it would do the same thing!?!
@@AmazingSmart-ngthyes. That's what he said.
Algeria
Thank you for taking the time to watch the video! Best wishes to you from Vietnam. Do you have any other ideas you'd like to share?
GUAU😮
¡Gracias por tu entusiasmo! ¿Hay algún detalle en particular que te impresionó más? 😊
1
Thank you so much! I'm really glad to receive such kind words from you. Wishing you a Merry Christmas filled with joy and warmth! 🎄🎉
This is absolutely amazing. This man (assuming he/she is a man or woman or has transitioned to a man/woman) in any case, it is genius. Everyone needs to know about this before it disappears 👏
Thank you for the thoughtful comment! The creativity behind this idea truly knows no bounds. What project do you think this genius invention could inspire you to try?
Look at the hands is it a woman .. common
*This is what I call a genius hack! Going to use this every day now. Thank you!*
Thank you for the kind words! I'm so glad you found the hack useful. Which task are you most excited to try it on first? 😊
explain as well how have you've done the letters of the plastic
Thanks for asking! For creating the letters on plastic, there are several methods depending on the materials and tools available. Here's a common approach:
Cutting or engraving: You can use a laser cutter or a CNC machine to carve out the letters precisely on the plastic surface.
Stenciling or painting: If you're doing it manually, you could create stencils of the letters and spray paint or use acrylic paint to fill them in. This method requires careful masking to keep the edges sharp.
Hot stamping or foil transfer: A heat press and foil sheets can transfer a shiny metallic finish to the plastic letters, giving them a more polished look.
If you’re looking to create your own letters for a specific project, let me know what type of plastic and tools you have, and I can help guide you through the process! 😊
Connerie, on peut faire mieux avec un qtyp et une batterie 9 volts, plus une cartouche vide de stylo bille ... Ça prend quelques minutes et c'est sans risques !
Thank you for sharing! It seems like you’ve come up with a simpler and safer way to do it. It’s great to see such creative and easy-to-implement ideas! Have you tried this method yet?
Сувга кушганингиз тузми нима?
Thank you for sharing! However, it seems like you're referring to a traditional dish. Could you explain more so I can understand it better?
@@AmazingSmart-ngth узбекча ёзинг чет тилини тушинмайман не чего не понятно
1번
Hello! Is there anything I can help you with? 😊
سعيد من الجزائر ،
Saïd d'Algérie,
Bonjour Saïd d'Algérie ! Merci d'être ici et de partager votre commentaire. Que pensez-vous des idées présentées dans la vidéo ? Avez-vous des projets ou des idées créatives à partager ?
Malaysia
Thanks for sharing! Greetings to Malaysia! 🇲🇾 Do you have any DIY projects you're working on or looking to try out? Would love to hear about them! 😊
Wrong action can cause battery explosion...very dangerous
You're absolutely right; working with batteries can be very dangerous if done incorrectly. Safety should always be the top priority when handling or modifying them. Do you have any particular precautions you follow when dealing with batteries?
13.40 that sign should say 'be patient'
Good catch! A reminder like "Be Patient" would definitely fit the moment. Do you think patience is the secret ingredient for all successful DIY projects? 😊
Đến từ long thành,đồng nai
Cảm ơn bạn đã chia sẻ! Rất vui khi biết bạn đến từ Long Thành, Đồng Nai. Bạn thấy ý tưởng trong video có hữu ích không? 😊
Eso era cuando Adán era electronico
¡Jaja, una forma creativa de verlo! Gracias por el comentario. ¿Qué tipo de proyectos o inventos te gustaría ver en el futuro?
어차피 음성이 없으니 영상만 나오면 될건데,
음악도 아니고 멜로디도 아닌 시끄럽게 스트레스만 주는 노이즈 소리는 왜 넣어서 듣게 만들었을까?당장 편집해서 노이즈 빼는게 나을듯.
Thank you for the feedback! It seems I overlooked the noise issue. I'll make sure to add more soothing background music in the next video. Do you have any suggestions for a style of background music you'd like to hear? 😊
@@AmazingSmart-ngth
배경 음악이란 것 그 자체를 완전히 없애주세요.
조용히 차분하게 영상에만 몰두할 수 있으면 좋겠습니다.
No matter how useful, 17':24, too long.
You're absolutely right-17 minutes can feel like a stretch for some viewers. I'll work on keeping future videos more concise while still delivering valuable content. How long do you think would be ideal for a video like this?
ภาบาไทยครับ
Thank you for your comment! Is there anything specific in the video you'd like to know more about? 😊
0번 뭐하는거냐 쓰잘데기없는 영상
웃겨 ㅋㅋㅋㅋㅋㅋ
This video demonstrates how to repurpose seemingly useless items or bring creative ideas to life with simple tools. What part did you find funny? 😊
Too many important details left out.
I understand your point! Missing key details can definitely make it harder to follow or understand the full picture. What specific details do you think should have been included, or is there something you’d like to dive deeper into?
1
Thank you! I’m glad to hear from you. If you need any further assistance, just let me know!
Nie wiem po jaką cholerę się trudził z lutownicą ja by wystarczył sam klocek ? Chyba że się nudził !
Interesting point! Sometimes these "experiments" are just a way to spend time creatively or explore new solutions. Do you think just using the block would be enough in every case?
В начале болгарка была правая, потом левая.
Под гайку надо было шайбу ставить.
Thank you for your comment! The change in the grinder's position is due to different shooting angles to better showcase the process. As for the washer, that's a great tip, and I'll keep it in mind for future videos. What else would you suggest improving?
@@AmazingSmart-ngth , немного затянуто видео. Есть даже просто лишние движения. И неплохо бы формулу соли показать на видео.
А в целом видео полезно для общего развития. :)
把好的東西給弄壞了
I'm sorry you feel that way. My intention was to share an interesting idea, not to damage good things. If you have better suggestions or improvements, I would love to hear them! Wishing you a Merry Christmas and peace and happiness! 🎄
سلام ممنون میشم بگید داخل آب چه چیزی میریزید؟
Hello! Thanks for your question. Typically, substances like salt, baking soda, or detergents are added to water, depending on the project or application. If you're referring to a specific project, please share more details so I can guide you better. 🌟
Thaijan
Greetings from Thailand! Thank you for stopping by to watch our video. Do you have any cool thoughts or ideas you'd like to share? 😊
Ha... Ha.... What a waste of time and resources.... You not only waste your time, as well as our's.....
I understand your perspective, and I appreciate your honesty! The goal was to inspire creative problem-solving with materials that might otherwise be discarded. Do you think there’s a way to make such projects more valuable or impactful for you?
เช่นกันครับแต่ไม่เก่งถายาอื่น
That's right, effort is the most important thing! Keep trying, and you'll improve over time. Have you ever tried making something fun before? 😊
HA...Ha....HAHAhaha
Glad to see the humor landed! Did something in the video give you a good laugh, or was it just the overall vibe? 😊
@@AmazingSmart-ngth You earn money from these films. So OK. You earn money from "printing" such subtitles? Also OK. For those who want to make one such subtitle, you don't need such a "machine"! Have fun.
من چیزی جز پارچه گرمادادی لعین کاری یدیوم
Thank you for sharing your perspective! Do you think there's a better way to approach this? Your suggestions could be really helpful. 😊
Bekar dikhadiya
Thank you for sharing your opinion. I’m always striving to improve the content to offer more useful and interesting ideas. What would you like to see in future videos?
А сделать велосипед из этого паяльника , СЛАБО ??????
(Interesting challenge! A bicycle from a soldering iron-that's on a whole new level of creativity. But who knows, maybe it could become possible with your idea! Would you take on such a project?)
Δουλειά δεν είχε ο διάολος...
(Haha, thanks for the comment! Do you think these creative ideas are worth the effort, or are they just for fun?)
0
Thank you so much for your support! 😊 Which part did you find the most useful? Any thoughts you'd like to share?
Ідея непогана. Україна.Севастополь.
Thank you for your comment! Glad you liked the idea. Have you tried doing something similar on your own? 😊
Thank you! Glad you liked it. Is there something you’d like to see in the next videos? 😊
...weißes Pulver, was ist das ?, ...Waschmittel ?, ...Talg?, ...Kokain ?....
Sorry, but that sounds like a confusing question. Could you clarify what you're referring to? The white powder could be many different things, but it's important to ensure we're talking about safe and legal materials. 😊
Waisted time that you will never have again, I usually don't criticize but what do these have to do with each other? The video should have been labeled for what it is,and I suggest strongly that you remove it and reliable it again for what it refers to in the last few minutes!
Thank you for sharing your thoughts! I understand your concerns about the title and content alignment. What specific improvements would you suggest to make the video more engaging or accurate? Your feedback helps refine future work!
Time as we call it is our Master and although we sometimes say that we have it to kill, will be the death of us all, so when we build something as wonderful as you have with the video, organizing it's ID would benefit those who use the Time to watch it.thank you
The frigging music is doing my head in I have to turn off before I end up mentally impaired.
I get it, sometimes background music can really get on your nerves, especially if it's repetitive! Have you thought about watching with the sound off or muting it for a better experience? You can still focus on the visuals without the distraction!
Eso era cuando Adán era electronico
Haha, that's a creative way to put it! Thanks for your comment. What kind of projects or inventions would you like to see in the future?
1
Thank you so much! I’m glad this video was useful to you. Do you have any other DIY ideas you’d like to see in the future? 😊
1
Thank you so much! I’m glad to hear you enjoyed the video. Do you have anything else you’d like to share?