I checked the ground wire at the switch for continuity back to the car and negative terminal of the battery. Seems like Ground is OK. Brake lights are still on. Any thoughts on why else this is happening?
Thanks for the reply. Yes, I’ve replaced the brake light switch three times. This is the third one. I had been getting the “implausible signal” error. Now I get that code and the lights stay on.
Where is this brake light swtich located at on the master cylinder? I have a MK6 jetta that my mechanic just did a a brake job on and now the lights are staying on and the push start ignition is working without pressing the brakes
The brake light switch is underneath the master cylinder. You can find a lot of videos that show how to remove it. It’s fairly easy to do, just a tight fit.
Buenos días, consulta, tengo un polo trendline 2023 y me salio un mensaje que dice compruebe luz derecho de freno, pero me funcionan todas las luces, que puede ser?
@@alexleonard1955 Yes, it was the brake master cylinder in his last days, i remember after a few days i lost the brakes too, when i changed the brake master cylinder even the lights back to normal
@rafikannabi thank you for the insight I replaced the master cylinder with a new one and that's when the problem statred so maybe they sold me a defective master cylinder
Where did you connect because I didn't see
Terminal 4 (not sure what color) is power, Terminal 2 (brown) is ground.
Hello, good video, can you tell me which of the wires on the switch is the ground?
Sir how did you make the wire
I checked the ground wire at the switch for continuity back to the car and negative terminal of the battery. Seems like Ground is OK. Brake lights are still on. Any thoughts on why else this is happening?
Replace the switch at the master cylinder.
Thanks for the reply. Yes, I’ve replaced the brake light switch three times. This is the third one. I had been getting the “implausible signal” error. Now I get that code and the lights stay on.
I had the same problem with a 2017 jetta. a wire from the plug was split in half.
How do you think that happened?
Where is this brake light swtich located at on the master cylinder? I have a MK6 jetta that my mechanic just did a a brake job on and now the lights are staying on and the push start ignition is working without pressing the brakes
I’m having the same issue with my 15 Audi A3 but my car says check brake fluid and it’s full
Hello, did you solve your problem? I have the same jetta mk6 case with brake light on
do you solve this problem?
The brake light switch is underneath the master cylinder. You can find a lot of videos that show how to remove it. It’s fairly easy to do, just a tight fit.
Brake light staying on can also be due to a burnt fuse. Check in the engine bay fuse box.
Buenos días, consulta, tengo un polo trendline 2023 y me salio un mensaje que dice compruebe luz derecho de freno, pero me funcionan todas las luces, que puede ser?
Perdona la tardansa,arreglaste el problema de la luz?
Got a 2011 chevy silverado 1500 the brake lights come on as soon as the key switch is turned on. Replaced the brake switch no go, still on.
figured it out?
@@AsapFlxw Faulty new part.
I have a similar situation but when i push the brake the lights turns off, its working on the inverse
Any solution?
I'm having this same issue did you find a solution to this
@@alexleonard1955 Yes, it was the brake master cylinder in his last days, i remember after a few days i lost the brakes too, when i changed the brake master cylinder even the lights back to normal
@rafikannabi thank you for the insight I replaced the master cylinder with a new one and that's when the problem statred so maybe they sold me a defective master cylinder
ua-cam.com/channels/dh-nQA-d-39mcHKua4LX2A.html
ua-cam.com/channels/dh-nQA-d-39mcHKua4LX2A.html