Wow, very good memories for me. I worked on those trucks (6 in the fleet) back in 1982-1986. I was an Allison Transmission mechanic at the time and became one of the team that modified the trucks from Detroit 12V71 engines to 12V92TA rated at 750 hp at 2100 rpm. The transmission was an Allison CLBT 6061-6 six speeds with lock-up clutch, remote mounted. All components were modified from the fuel tanks, rear ends, radiators ect in order to increase the GCW at 750,000 pounds load. The 3 trailers rig was replacing 10 standard trucks. End results.... 1 mile per gallon of fuel, but the job was done. At the time the distance was 55 miles one way! The three trailers were already loaded up at pick up. Matter of time saving. Great time to remember... Denis Frenette
@@zecrunchy repower were carried out at customer’s site, not at the distributor’s shop! Yes early during the Marlin DDA days… All the best to you! Denis
1 mile per gallon for 1 truck compared to 10 trucks for the same load seems pretty good for a trade off, but how much extra wear and tear for the setup?
@@ryanchen8403 Hi Ryan, you have good observations! In fact, we deal here with a remote location with off road conditions… winter thaw, river bridges, ect ! by limiting the number of trucks carrying heavy loads, the company save a huge amount $$ in road maintenance. I remember, having seen a pick-up truck loaded with 8D batteries with a big magnets underneath the rear bumper the catch all kind on metal pieces that could eventually puncture tires! So this’s an explanation to you comment! Also maintaining parts inventory for few brands of trucks is also in the picture. Thanks, Regards, Denis Frenette
I like how all of the smaller or regular logging trucks were bringing some large loads, then out of nowhere here comes the Pacific, Challenger or Hayes, whatever slowly grunting up the hill with a whole forest on it's back. Those purpose-built logging trucks are no joke.
Hi Everyone I have a 1981 Pacific Pacific P510S 5 axle set up as a Selfloader with a Grizzly 215C loader . I'm a semi retired Heavy Duty Mechanic here at Port Alberni on Vancouver Island. We ran P16 off highways here and we did run a train out of Franklin River Camp "B" to China Creek. Big wood on our loads. I helped keep these trucks and Hayes H.D.X.s running for M.&B. as well in my latter years drove them and a " Challengers" that was built here in Port Alberni. Never got to drive the train but hauled lots with the 5 axles off very step mountain roads. I'm going to call Pacific Power Train in Vancouver and find out more about these units.
wow! my neighbours have what i believe is a p12, bright orange(well, was, now its not so bright haha) seeing it parked in their driveway was always so cool whenever i passed by on my way to school
The challenger was the best purpose built truck ever for west coast logging wasn't it? Never really took off for some reason though idky, they only completed 20 working units I think I heard somewhere ..
Okay but can we appreciate how the other trucks were going with some pretty impressive sized loads, and then that pacific rounds the corner looking like a road train got lost and found it’s way into Canada somehow
That third log from the right is the one that made the boards for my kitchen wall. Sweet. Looks like the design philosophy for the trailers was. BIGGER!
I ran a bus service from Victoria to Bamfield transporting west coast trail hikers in the late 90's. Those Mac Blo off highway trucks were bloody huge...the roads were often just barely wide enough to get out of their way!
In my 41 year in camps, we had these trucks, did tune ups on 71s 92s, even did a swap to a Cat 3412, changed many a trans, diff, planetaries, on KW, Mack, Hayes, Pacific , Challenger even a old Euclid, all were basicly the same except the Euc, They were given many nicknames, Honda, 2 stroke joke, barky, green leaker. Even have a picture of a 3 log load, all from the same tree. Even had to 10 and 12 foot versions, first 5&4 I ever got to shift in a 12. Lots of good memories, sore bones. Coast Powertrain did many a Allison, Clark diff for us. Now all this stuff is sold off to Indonesia i brlieve.
good moring to all you loggdriven men, you all really amase me in all the long hours you put hauling all them big loads wood, all i can say keep it up, im watching you all,
Hello Brother! Have my clear honor and respect Wise Mecanic. That truck and company are big iron Horse.They are hand made my the Best manufactury in wourld -they plant them to Ásia at the wardest tropical condition and they are well and ready with good manteinance.In Portugal We have volvo 16L and scania ,Daf or Man but not in a milion years that beaty hooverloaded! Salut Bro André Campos Oporto Wine city Portugal
These look like 12' bunks on the logging trucks , in the 1970's I ran a Tank Drill drilling / blasting rock to put in New Roads for the trucks to haul out of the bush to the log dumps and booming grounds - The had HAYES - PACIFIC P 16 - 12 ' & 14' bunks . Euclid 85 Ton Rock Wagons with bunks 16' to 18 - Huge Loads close to 150 Tons of Wood - all the other trucks would sit in a by pass while these Monsters came out of the Bush with a 2 to 3 per cent down hill grade - this was across from the top of Vancouver Island - logging camps of Namu and Nikite - Huge dry land sorts where a Big Yellow cedar 5 ' to 6" ft on the butt - the Cash Buyers would pay $8000 for this One Log - that would be made into furniture in Japan - Huge self loading log barges would load the logs and take them across the Pacific Ocean to Asia - Not Many Big Trees anymore - now there is Helicopter Logging - Sikorsky Sky Crane = GOOD OLD DAYS
Awesome vid, my pops drove em all too, the 5 axle set up is definitely the way to go in the west coast steep country. When I was a young fella Dad had a 1974 hd Hayes, hauled a lot of off hwy with ten foot bunks in ol Hazel, he also had a 1984 mack, Maxine "the big black bitch" with ten foot bunks also, it had the 865cid v-8. Dad drove off highway up north during the winters on ice roads, was number one truck for Triple c for a number of years in Squamish and He also drove the big iron 12s 14s 16s for Powell Daniels, Russell Lily contracting for about 12 years which eventually became Hayes logging i believe...
Dad was a wild one for sure, he was a good trucker, he used to slack one trailer brake off to about 30% in case the brake locked up on the ice or dynamited for some reason the trailer would still follow the tractor instead of dragging it off the road.. God speed pops! I miss you!!
I would like to find more video and picture of this old Pacific truck. I was at Mistassini when Domtar was there and those truck always facinate me...3 trailer...6 hours for 1 only trip...
While we all know the buzzer dozen was a strong old motor it is much more likely that these big tractors were using the 1710 Cummins v 12 or the 1786 v 12 cat motor to pull these kinds of crazy wood loads
Hello Canadian truckers . Ionly becameaware of Pacific trucks last night 16/10/2020 courtesy of Jacks Chrome Shop . They are very impressive rigs . Can anybody tell me roughly how much weight they are pulling and over what distance . thanks guys . Take care . Mick . Sydney Australia .
Same goes for all the brands today... back then they were made to last generations and be easy to work on... now they are made to last until the lease is over...
@@rubenbraekman4515 just like everything, so hard to work on, so expensive, so many knick knacks. all my vehicles are 1980 or older. cause 1. they look better. 2. theyre way cheaper. and 3. god its a breeze working on them compared to newer junk, i had an opportunity to fix a relatives tractor, it was one of the tracked combines from the ol JD company. there were more wires than i had when wiring our new home. so much computery stuff. was super hard to fix and i never got around to finishing it.
@@JereYaps read the original second "comment" in comments section if you will. Chock full of vitamins, minerals, & info, hoping to address some curiousities which are a healthy part of us all! Bless your miles, & all things 😎
Well a truck with just one 4 axle trailer with the bunks out to side would probably be carrying just rough estimate but would say around 65.00it's to 70.00 kgs the trains just add for every trailer it's heavy and only reason they can do it is they own the road benefet of logging mill having it's own roads no load restrictions only other people driving them would be forestry workers and fisherman hunters but the milk also has trucks coming in the hwy system where you can only haul 63.500 kgs on 5 axle or btrain
They were probably holding the camera perfectly still; it was the power of the rigs that was shaking the earth to its very core, then reverberating back to the surface, creating the instability effect.
Wow, very good memories for me. I worked on those trucks (6 in the fleet) back in 1982-1986. I was an Allison Transmission mechanic at the time and became one of the team that modified the trucks from Detroit 12V71 engines to 12V92TA rated at 750 hp at 2100 rpm. The transmission was an Allison CLBT 6061-6 six speeds with lock-up clutch, remote mounted. All components were modified from the fuel tanks, rear ends, radiators ect in order to increase the GCW at 750,000 pounds load. The 3 trailers rig was replacing 10 standard trucks. End results.... 1 mile per gallon of fuel, but the job was done. At the time the distance was 55 miles one way! The three trailers were already loaded up at pick up. Matter of time saving. Great time to remember... Denis Frenette
Repower done in Quebec city, right Denis? in Marlin Detroit Diesel days.. Was done before my time :)
@@zecrunchy repower were carried out at customer’s site, not at the distributor’s shop! Yes early during the Marlin DDA days… All the best to you! Denis
1 mile per gallon for 1 truck compared to 10 trucks for the same load seems pretty good for a trade off, but how much extra wear and tear for the setup?
@@ryanchen8403 Hi Ryan, you have good observations! In fact, we deal here with a remote location with off road conditions… winter thaw, river bridges, ect ! by limiting the number of trucks carrying heavy loads, the company save a huge amount $$ in road maintenance. I remember, having seen a pick-up truck loaded with 8D batteries with a big magnets underneath the rear bumper the catch all kind on metal pieces that could eventually puncture tires! So this’s an explanation to you comment! Also maintaining parts inventory for few brands of trucks is also in the picture. Thanks, Regards, Denis Frenette
I wondered what powered them.
I like how all of the smaller or regular logging trucks were bringing some large loads, then out of nowhere here comes the Pacific, Challenger or Hayes, whatever slowly grunting up the hill with a whole forest on it's back. Those purpose-built logging trucks are no joke.
Hi Everyone I have a 1981 Pacific Pacific P510S 5 axle set up as a Selfloader with a Grizzly 215C loader . I'm a semi retired Heavy Duty Mechanic here at Port Alberni on Vancouver Island.
We ran P16 off highways here and we did run a train out of Franklin River Camp "B" to China Creek. Big wood on our loads. I helped keep these trucks and Hayes H.D.X.s running for M.&B. as well in my latter years drove them and a " Challengers" that was built here in Port Alberni. Never got to drive the train but hauled lots with the 5 axles off very step mountain roads.
I'm going to call Pacific Power Train in Vancouver and find out more about these units.
wow! my neighbours have what i believe is a p12, bright orange(well, was, now its not so bright haha) seeing it parked in their driveway was always so cool whenever i passed by on my way to school
The challenger was the best purpose built truck ever for west coast logging wasn't it? Never really took off for some reason though idky, they only completed 20 working units I think I heard somewhere ..
That big blue Pacific at the end was absolutely amazing and off the charts, ridiculous really
This drone footage is absolutely stunning! 🚁😮
Okay but can we appreciate how the other trucks were going with some pretty impressive sized loads, and then that pacific rounds the corner looking like a road train got lost and found it’s way into Canada somehow
That third log from the right is the one that made the boards for my kitchen wall. Sweet. Looks like the design philosophy for the trailers was. BIGGER!
Those Pacifics are big. I saw one at a Stewart & Stevenson shop. I stand 5'6" and I could stand under the fender.
I ran a bus service from Victoria to Bamfield transporting west coast trail hikers in the late 90's. Those Mac Blo off highway trucks were bloody huge...the roads were often just barely wide enough to get out of their way!
Just came on these videos you guys are the greatest these trucks are unbelievable the tonnage you are putting on them and they want some more. Cheers
In my 41 year in camps, we had these trucks, did tune ups on 71s 92s, even did a swap to a Cat 3412, changed many a trans, diff, planetaries, on KW, Mack, Hayes, Pacific , Challenger even a old Euclid, all were basicly the same except the Euc,
They were given many nicknames, Honda, 2 stroke joke, barky, green leaker.
Even have a picture of a 3 log load, all from the same tree.
Even had to 10 and 12 foot versions, first 5&4 I ever got to shift in a 12.
Lots of good memories, sore bones.
Coast Powertrain did many a Allison, Clark diff for us. Now all this stuff is sold off to Indonesia i brlieve.
It is a great video that is for sure, thought I heard a buzzin dozen in the 1st or 2nd train may be wrong but it was a Detroit for sure.
Nice to see some older footage of these trucks.
This is like an 1hour of where a live !
good moring to all you loggdriven men, you all really amase me in all the long hours you put hauling all them big loads wood, all i can say keep it up, im watching you all,
Those are some mega loads, thanks for sharing!
Cool video I love seeing this old stuff.
Wow the most powerfull truck,just respect....
Hello Brother!
Have my clear honor and respect Wise Mecanic.
That truck and company are big iron Horse.They are hand made my the Best manufactury in wourld -they plant them to Ásia at the wardest tropical condition and they are well and ready with good manteinance.In Portugal We have volvo 16L and scania ,Daf or Man but not in a milion years that beaty hooverloaded!
Salut Bro
André Campos Oporto Wine city Portugal
Love to see it go around a 90 degree turn
would need a few hundred feet
These look like 12' bunks on the logging trucks , in the 1970's I ran a Tank Drill drilling / blasting rock to put
in New Roads for the trucks to haul out of the bush to the log dumps and booming grounds - The had HAYES -
PACIFIC P 16 - 12 ' & 14' bunks . Euclid 85 Ton Rock Wagons with bunks 16' to 18 - Huge Loads close to 150
Tons of Wood - all the other trucks would sit in a by pass while these Monsters came out of the Bush with a
2 to 3 per cent down hill grade - this was across from the top of Vancouver Island - logging camps of Namu
and Nikite - Huge dry land sorts where a Big Yellow cedar 5 ' to 6" ft on the butt - the Cash Buyers would pay
$8000 for this One Log - that would be made into furniture in Japan - Huge self loading log barges would load
the logs and take them across the Pacific Ocean to Asia - Not Many Big Trees anymore - now there is
Helicopter Logging - Sikorsky Sky Crane = GOOD OLD DAYS
AMAZING LOAD! !
3:50 Imagine trying to back that into a spot.
Great load of logs! Lol! Wow!
incredible loads
You can hear the old Detroit diesel doing what they did. Great job
Awesome vid, my pops drove em all too, the 5 axle set up is definitely the way to go in the west coast steep country. When I was a young fella Dad had a 1974 hd Hayes, hauled a lot of off hwy with ten foot bunks in ol Hazel, he also had a 1984 mack, Maxine "the big black bitch" with ten foot bunks also, it had the 865cid v-8. Dad drove off highway up north during the winters on ice roads, was number one truck for Triple c for a number of years in Squamish and He also drove the big iron 12s 14s 16s for Powell Daniels, Russell Lily contracting for about 12 years which eventually became Hayes logging i believe...
Dad was a wild one for sure, he was a good trucker, he used to slack one trailer brake off to about 30% in case the brake locked up on the ice or dynamited for some reason the trailer would still follow the tractor instead of dragging it off the road.. God speed pops! I miss you!!
Decent loads! I like it!
I would like to find more video and picture of this old Pacific truck. I was at Mistassini when Domtar was there and those truck always facinate me...3 trailer...6 hours for 1 only trip...
@3:00 that road train would even make the Aussie's envious.
par le haut de la colline, le Pacific semble se déplacer à l'envers!
you would think so!...but no it dont
While we all know the buzzer dozen was a strong old motor it is much more likely that these big tractors were using the 1710 Cummins v 12 or the 1786 v 12 cat motor to pull these kinds of crazy wood loads
still, most of them still got that detroit
amazing... crazytruckers
So cool. Luckily no insane traffic to deal with.⚙️⚙️⚙️☠️
Those are strictly logging roads these are off highway trucks not street legal
snowrunner brought me here.. lols
Hello Canadian truckers . Ionly becameaware of Pacific trucks last night 16/10/2020 courtesy of Jacks Chrome Shop . They are very impressive rigs . Can anybody tell me roughly how much weight they are pulling and over what distance . thanks guys . Take care . Mick . Sydney Australia .
Hey Mick, if you go back and read comments number 2 from Denis Frenette, he wrenched that Fleet! of six- you might find out what you want there
3:59 😨 seriously...the Pacific is just obscene.
That truck can haul a 315 ton payload, basically the equivalent of 6 highway tree length pulp trucks.
Wow, Australia has massive roadtrains , but these logging trucks make ours look like matchbox cars🤣🤣
That RD800 in the beginning!!! Such a shame what Mack use to be compared to the Eurojunk they make today
Same goes for all the brands today... back then they were made to last generations and be easy to work on... now they are made to last until the lease is over...
@@rubenbraekman4515 just like everything, so hard to work on, so expensive, so many knick knacks. all my vehicles are 1980 or older. cause 1. they look better. 2. theyre way cheaper. and 3. god its a breeze working on them compared to newer junk, i had an opportunity to fix a relatives tractor, it was one of the tracked combines from the ol JD company. there were more wires than i had when wiring our new home. so much computery stuff. was super hard to fix and i never got around to finishing it.
It’s along shot, but we only gotta get one.
Thats like 10 truck loads these days and still be overweight lol. Love them old trucks
Wowwwwwwww
This guys is like, fuck it load it up.
Epic truck wow
OMG!!!REALLY???
What would the gross combination weight of the triple be??Somebody please tell me.
750,000 lbs
I used to haul at least 550 thousand pounds and more every load of redwood off highway"
Giant loads of pulp wood I suppose
Do they pull three in the winter?
Yes we do
@@Michel-yq2jm must not be very steep
Great video but I have to think that even a small rain shower would cause the Pacific to spin out on those hills!
Mqntap...oke...
Screaming Jimmy love it sounds Million Bucks😟😃😁😎👍👍👍👍👍💪💪💪💪🇦🇺🇦🇺🇦🇺🇦🇺🍺👍
Detroit Diesel power!
someone please tell me just how much a big load like that would weight
I guy said 600,000 up to 1,000,000 lbs.
@@sst9314 hold up a million pounds?
@@JereYaps read the original second "comment" in comments section if you will. Chock full of vitamins, minerals, & info, hoping to address some curiousities which are a healthy part of us all!
Bless your miles, & all things 😎
They wold have put more on but they ran out of forest.
Like 365🔔🤝🤝
Anyone know what happens to this truck? Still in service?
Yes most deliver for Amazon nowadays!
@@LRGDuran hahaha i cant tell if yer jokin or not but its funny....
@@25439 i would love to get my packages from a pacific logging rig 😎
@@LRGDuran true that!
So how much weigh on the triple trailer
Target gross, 750,000 lbs
WoW
Que país é este?
Este é o Canada 🇨🇦. O de onde você é.
It would take all day just to load the trailers!!
If they own a pacific they probably own a huge truck fleet that feeds this beast at a checkpoint for the final run to the mill
Muatanya gila
pacific p12?
pacific mack?
This must be from eastern Canada.
The truck is in the north of Dolbeau-Mistassini @@georgevinson612
@@danboyl5464 is this p16 still around? If yes did it make it to the island?
@@9751asd that's actually the p12
@@thermidorlevrai65 gotcha
@@9751asdI’m sure I saw it in Gold River
Какая же мощность у этого мака
12v71 detroit and 12v 92
Lot of sticks on there
Anyone see Bigfoot carting logs in those parts??
Yes
The wood is like hair on the back of a dog
Or what we call it on Vancouver Island British Columbia Canada Pecker Poles
truckers get paid by the ton????
Truckers are paid on time
Québec timber trucking in far north Québec.
Where in Northern Quebec? It looks like the road from Baie Comaeu to Labrador City before the road was tarred over.
Amazing, but ya the drunk guy filming the the massive Pacific
The proves how horrible Saber did to display the capabilities of the P16.
Why are there no more Pacific, big trucks...no more, virgin wood? Maybe emissions, got to crazy? Those...were definitely, the days.
Detroit diesel!
Well a truck with just one 4 axle trailer with the bunks out to side would probably be carrying just rough estimate but would say around 65.00it's to 70.00 kgs the trains just add for every trailer it's heavy and only reason they can do it is they own the road benefet of logging mill having it's own roads no load restrictions only other people driving them would be forestry workers and fisherman hunters but the milk also has trucks coming in the hwy system where you can only haul 63.500 kgs on 5 axle or btrain
"tyttyy
International. .big power
PACIFIC P12 not International.
@@roryparsons4069 P16
@@9751asd yes i know it's a P-16
It's not big enough
I want this job.. Pm me
It would have been a great video had you held the damn camera still 😏
They were probably holding the camera perfectly still; it was the power of the rigs that was shaking the earth to its very core, then reverberating back to the surface, creating the instability effect.
Sorry bout my texting abilities I can drive truck but can't type
Correct me if I am wrong, but a tiny v12 Detroit could not pulled that monster load up those hills, a Cummins-ta 1710 at least no ?
Al Speers .a v12 Detroit can do that job for sure
B.C
TRUCKS ARE MADE TO HAUL BC LOGS LOL not Ontario and Quebec twigs.....
dumbass
OVER LOADING......
Not for these trucks !
Got to be 200 plus tons on with 3 trailers