Good tools need to be well maintained. If you want to earn money with it, you have to put a little time and love into the maintenance from time to time. Good video, keep it up!💚💪🏼
Nice vid, thanks. Was hoping to see info on clearing bar oil passageways and pump when the chain oiling fails, though, hope you'll do another vid on that.
I had a problem with the chain seeming to get stuck yet the motor was going like the clappers. Took it to a dealer and they stripped it down to check the gearbox but could not find a problem yet is till happened. At 2:10, the "wheel" being pointed to has a screw in the middle, it is a let hand thread. I found this had come loose. Tightened it up, no more problems. When tightening the nut that holds the orange cover on, make sure the chain tension does not change.
Does anyone know where I can find the black lid that covers the shaft on the oil tank side? I've been trying to find it online to buy but can't find it anywhere
It appears that you're bar only has one oil port. Perhaps it won't oil like that. Double check that bar. Make sure it has an oil port on both sides. Just saying? Thanks for the video. Edited comment: after carefully watching your cleaning video again, I see there is a hole on both sides. Thanks for bringing that to my attention. I had never really noticed that before. I'm going to go clean mine up today. Cuz I have a nice little apple tree trim up. Spring has almost sprung.
It has 2 oil holes dont worry. It only oils through 1 hole as well btw thats how they're designed. It has 2 holes for when you flip the bar over for even wear, if you didnt know. 👍
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Great tutorial
Cheers 👍
Great video just got my pole saw for xmas
Cheers , have fun with it 👌
Good tools need to be well maintained. If you want to earn money with it, you have to put a little time and love into the maintenance from time to time. Good video, keep it up!💚💪🏼
Yep, you're spot on there 👍
Great job on video and explanation
Cheers 👍
Nice job.
👍
Great video. Thank you for sharing your expertise! Greg from northern New York, USA.
Nice 1 Greg, thanks for watching.
Nice vid, thanks. Was hoping to see info on clearing bar oil passageways and pump when the chain oiling fails, though, hope you'll do another vid on that.
Cheers, will do a vid if issues come up 👍
What tool did you use to clean sprocket
Great video
Thanks mate 👍
I had a problem with the chain seeming to get stuck yet the motor was going like the clappers. Took it to a dealer and they stripped it down to check the gearbox but could not find a problem yet is till happened. At 2:10, the "wheel" being pointed to has a screw in the middle, it is a let hand thread. I found this had come loose. Tightened it up, no more problems. When tightening the nut that holds the orange cover on, make sure the chain tension does not change.
Sounds like the dealer should of spotted that 1 👍
Wonderful video. The detail was so helpful. Did you ever do that chain sharpening video? Would live the link if so. Thanks!
I havent done a proper in-depth sharpening vid yet, got a few with some basic tips, they are over on my RJL machinery channel, Thanks👍
Where did you get that wrench and what is it called? I heard you say it was 13 mm. I MUST HAVE ONE or two.
Hello, great video. I have a Stihl FS-KM weed wacker attachment. How do I do maintenance? Does the head have oil in it?
Thanks, check this vid out for trimmer head: ua-cam.com/video/szWc4pNzbVM/v-deo.html
Is there any way do grease the head on these. I don’t see a grease zerk on mine.
No i dont think so.
So do you just not grease them?
@@randyc2525 Nope, never have done
Great job I have a problem why does my bar only work upside down
The stihl signs on the bar is at the bottom
It should work both ways, so something not right
chain has been fitted back to front. The cutters need to be facing towards the bar nose. The bar can be turned to even wear.
Hay, is that drive spoken 6 or 7 tooth
Does anyone know where I can find the black lid that covers the shaft on the oil tank side? I've been trying to find it online to buy but can't find it anywhere
Go to your local Stihl dealer
What size chain for km131r
It appears that you're bar only has one oil port. Perhaps it won't oil like that. Double check that bar. Make sure it has an oil port on both sides. Just saying?
Thanks for the video.
Edited comment: after carefully watching your cleaning video again, I see there is a hole on both sides. Thanks for bringing that to my attention. I had never really noticed that before. I'm going to go clean mine up today. Cuz I have a nice little apple tree trim up. Spring has almost sprung.
It has 2 oil holes dont worry. It only oils through 1 hole as well btw thats how they're designed. It has 2 holes for when you flip the bar over for even wear, if you didnt know. 👍
Ok ...thanks for the reply
Is there a way to adjust oil flow?
No dont think so on this model