:) Funny. At 1:04 there's a video editing glitch. Cannot remember how in appeared as I'm always checkin content 10 times before uploading :) sorry for that.
Usually 1:1 for acrylic paint. But for the fuselage I'm doing 3 layers. 1st one 1:2 1 paint 2 thinner. Then the other two ones 1:1. I might have the 3rd one with even less thinner like 1:0.5. It depends on the color and the number of layers
man the amount of hard work you put in these. just amazing. id love to build these models it's just that i don't like painting stuff. id have to get an air compressor for the spray paint etc etc. are there any models which do not require painting ?
Thanks for the appreciation. There are millions of models out there. I'll probably get one from china myself. I've seen a lot of positive reviews about them :) Right now I'm using the revell starter airbrush. It's not the best but it replaces spray cans quite well. Good luck with your models and post them on youtube ;)
:) i've sanded a bit the edges and added a thick layer of paint to fill the gaps. The joints are still visible but not that ugly. Indeed there's a hard spot to address:)
Thanks for your comment. Yep. You should get the same results with a spray can. Just not forget to adjust your technique as the spay can has a high debit so you need to be carefull. About the varnish. It depends. There are a lot glossy paints so no need for varnish in that case :)
Хм... Модель в конечном итоге не плохая, но если у тебя есть аэрограф, то зачем красить шасси и внутренние стороны двигателей кистью? Так же из-за неровного нанесения масок съехали некоторые иллюминаторы есть задувки у синего молдинга на брюхе передние стороны крыльев нужно обязательно красить аэрографом, т.к не существует ни одного нормального металлика под кисть Еще немного поблёскивают декали (хотя может мне и показалось) чтобы этого не было модель перед нанесением декалей надо покрыть глянцевым лаком. это все что я смог отметить, Успехов!
:)) yeah. You won't believe this. but I've just finished the little sister 350-900 in aeroflot livery. Was started filming the episode 1 month ago. And i wore a yellow - blue t shirt. What were the odds. I was pissed off about choosing the livery but it'a actually nobody's fault for a mad man's stupid decissions. I'll upload the build tomorrow. Hopefully I'll not lose all my subs over this. It turned out to be a beautiful bird afterall the 350-900
![[EN SUB] Airbus A350-1000 XWB (Part 2/2) Airplane model paint job 1: 144](http://i.ytimg.com/vi/ou6xSJS0VSA/mqdefault.jpg)
![[EN SUB] Airbus A350-1000 XWB (Part 2/2) Airplane model paint job 1: 144](/img/tr.png)
:) Funny. At 1:04 there's a video editing glitch. Cannot remember how in appeared as I'm always checkin content 10 times before uploading :) sorry for that.
Which ratio your thinning the paints?
Usually 1:1 for acrylic paint.
But for the fuselage I'm doing 3 layers. 1st one 1:2 1 paint 2 thinner. Then the other two ones 1:1. I might have the 3rd one with even less thinner like 1:0.5. It depends on the color and the number of layers
Thanks! Informative and entertaining
Thanks so much for your comment. Glad it helped you out :)
Lovely stuff!
Thanks for the appreciation !!
Fantastic work my friend!!!
You're too kind:) thanks
hello! you just earned a sub!, the amount of work you put into this model surpirses me.
thanks for the appreciation man. the important thing is to have fun while building the model ☺️✈️
Hello. This guy is very good!))) But what do you say about it?))) ua-cam.com/video/eWTYYBzYaSc/v-deo.html (in 2 parts)
compare to Revell 1/144 which one is better?
I always find zvezda ones a bit better than revell
I❤the A350s
Agree. Gorgeous looking aircraft
Nice! Very nice😀👍👍
You're too kind man. Welcome back !!
....cracking job! Love it. Come on then....what "Blue" did you use????
Thanks for the appreciation. It was a revell aqua 51. Ultramarine blue
Do you mask the windows or no
It depends on the model and the libery. Sometimes it makes sense to mask them but sometimes i spray them and just use decals
man the amount of hard work you put in these. just amazing. id love to build these models it's just that i don't like painting stuff. id have to get an air compressor for the spray paint etc etc. are there any models which do not require painting ?
Thanks for the appreciation. There are millions of models out there. I'll probably get one from china myself. I've seen a lot of positive reviews about them :)
Right now I'm using the revell starter airbrush. It's not the best but it replaces spray cans quite well. Good luck with your models and post them on youtube ;)
You can hand paint the models as well! That’s what I do. All you have to do is just thin the paint some so you don’t see brush strokes.
Why you didnt put the passenger windows?
@@missakhaladjian why you didnt learn english?
@@sidv4615 leng stowry mi phrend
How did you adress the ineviteble seams inside the engine cowlings, top and bottom ? Or did you skip ?
:) i've sanded a bit the edges and added a thick layer of paint to fill the gaps. The joints are still visible but not that ugly. Indeed there's a hard spot to address:)
Отлично получилось.А если заместо аэрографии -просто балончиком буду красить эффект такой же? А лаком стоит покрывать?
Thanks for your comment.
Yep. You should get the same results with a spray can. Just not forget to adjust your technique as the spay can has a high debit so you need to be carefull.
About the varnish. It depends. There are a lot glossy paints so no need for varnish in that case :)
Хм... Модель в конечном итоге не плохая, но если у тебя есть аэрограф, то зачем красить шасси и внутренние стороны двигателей кистью?
Так же из-за неровного нанесения масок съехали некоторые иллюминаторы
есть задувки у синего молдинга на брюхе
передние стороны крыльев нужно обязательно красить аэрографом, т.к не существует ни одного нормального металлика под кисть
Еще немного поблёскивают декали (хотя может мне и показалось) чтобы этого не было модель перед нанесением декалей надо покрыть глянцевым лаком.
это все что я смог отметить, Успехов!
Thanks for the advices!
Даже не знал что американцы покупают у нас модели 💀
:) yep they do. Entire world is actually buying the kits because are cheap and well moulded
@@MahaysAtticПонятно я перевёл переводчиком😊
@@yamal.www.deer976 for sure I did the same thing :) thank god for the technology
:)
Без стекла это плохо
hello. thanks so much for your comment. :) at the end of the day important is to have fun making the model !!
I guess we won’t be getting any more of these kits. Thanks to Putin.
:)) yeah. You won't believe this. but I've just finished the little sister 350-900 in aeroflot livery. Was started filming the episode 1 month ago. And i wore a yellow - blue t shirt. What were the odds. I was pissed off about choosing the livery but it'a actually nobody's fault for a mad man's stupid decissions.
I'll upload the build tomorrow. Hopefully I'll not lose all my subs over this. It turned out to be a beautiful bird afterall the 350-900
True
I just found this channel and I love it! What awesome videos. Need likes? -> P-R-O-M-O-S-M!
:) thanks for the appreciation !!