CoroThread 266 with iLock Technology Sandvik Coromant
Вставка
- Опубліковано 4 кві 2011
- CoroThread 266 is an innovative threading concept that utilizes iLock technology to improve insert indexability, accuracy, and eliminate insert movement during threading operations. CoroThread inserts have interlocking grooves for the most stable laydown threading system on the market.
- Наука та технологія
Great Tool! We’ve been using it for a while now and it just work great. In combination with HP coolant and a chipbreaker it works even better.
Thank you for making great tools.
trust me folks in the future all inserts will have this technology V D style first than just about everything this really works 266 makes much better threads over the long run
there is nothing like old news
Hunderte mal gemacht und immer mit Platten dieser Firma.
Резцы хорошие.
suggest me for boring lathe tool below ○30 mm × 250 mm long for motor bushing and rotor plain turning (you know rotor of submersible pump) it's had 99° right and left side at middle area of rotor.
Very good
Qual o.precos destas pastilhas.para aço.1045 torno super pesado ?????..
I use these whenever it's possible, I can often run 30+ parts with one tip.
Wich material? inox
@@MrIngorodrigues Typically 4140 HT, softer materials such as 1045 have more like 60 parts per edge.
Nice
Dear Mr. Coromant, Do you make a cylindrical insert holder,gripped on a v block in the tool post,so that I can swivel the tool to suit the helix angle of the thread,thereby ensuring that the correct side rake on the flanks of the cutter( and that the top face is perpendicular to the helix angle, I realize that your primary commercial concern is to supply the mass production market , but I think that ,worldwide, there are many turners ( e.g. toolrooms) who would welcome such an addition to your products. Might you also be able to make available the "angle of swivel" for any pitch and diameter of thread that we could download seeing as you allready have that informatrion ?
They make anvils that the inserts sit on with different angles for that very purpose, and an angle chart to go with it.
en español por favor
What program could I use to create a such animation like this?
+Jakub Grzegorczyk
Hi Jakub,
Most of our animations are made in a software called Cinema 4D.
Best regards,
Klas Franevik
Marketing and communication
Sandvik Coromant
@@sandvikcoromant THANKS SANDVIK
@@sandvikcoromant how can I work with you???
@@m.s.nirmal9529 - Hi! On our web you can find your local contacts at Sandvik Coromant, they can assist you with your needs.
www.sandvik.coromant.com/en-gb/contact/pages/findus.aspx
@@johanjackson4800 thank you
boudrant tunisie