I would have to contest the theory of using lower amperage increasing the rate of change. This is simple enough to test with a veriable amperage car battery charger. I can say for sure Lye will eat the electrodes depending on the material its made of. Rule of thumb is use cheap materials for testing before committing to more expensive materials. This can be done with materials cheap enough where there is little cost to replace the parts. This is not an expensive venture. Another point; There are several ways to prevent water from entering the intake such as distance the cell is from the intake port, orientation from the port in height, and potentially warming the hydrogen mixture. However you need to know the lower combustable limit and not exceeding it. There are cell designs that accomplish this. All in all this is a good video.
More interestingly besides other people continuously muddying the waters on if the Hindenburg was sabotage or simply a electrostatic discharge there were 2 simultaneous investigations conducted between 2 avisorial factions. One of them neglected to include details of their findings within their report while making it public. I sense corporate collusion and history has shown industrial interests Trump the needs of a nation. Think about the money spent on petroleum for the last 86 years, wars fought, and an entire economies based on oil. If it were known that a gasoline engine were capable of running on hydrogen back then, how dramatically this would have altered our history. The constants steering people away from hydrogen power appear to be for global economics, Power and control. I want a crew list and to know what wealthy individuals were aboard that airship. Odds are there was a scientist or inventor, or an influential benefactor that knew this secret and had intention on mass producing something that would take away this cash cow. When J. Edgar Hoover wrote a thank you letter to the author of a book that took the focus off of Joseph Spa it was a read hearing if you also know Hoover’s role in other affairs concerning the arostocracies. Likely why there was mentions of him being involved in homosexual conduct. That is also a red herring. When the powers that be don't want something investigated they associate it with sexual deviency. Most recent was painting Epstien and coded language to pedophilia and sex trafficking. Epstien funded Ai and robotics in large part.
there is a company, who claims to get the efficiency higher, by avoiding gas bubbles around the cathode and anode. they are not drowned, more fed buy a sponge soaking up the water. anyway they only work for large scale projects. in other words, with the oil industry.
@@volks-electrolyzersomething similar to this on Amazon, COBETTER PTFE Disc Membrane Filters Hydrophobic, 47mm Diameter, 0.22µm Pore Size, 100 Pieces/Pack
@@davidprock904 hydrophobic is not like a sponge. it is water repellant. you want to use this to raise the Amperage and avoid gas bubbles around your plates?
@@volks-electrolyzer those filters are like a sponge, the smaller the pores in the filter/sponge the better it will be. And if your filter or sponge doesn't hate water, put it in a vacuum chamber with a liquid based treatment to apply to stuff to make what ever be super hydrophobic, submerge it and vacuum out all the air to force it into the sponge completely, pull it out and dry it out and place that inline of the H2 to leave the H2O vapor behind.
Hi dear sir It is valuable information. I am deeply appreciated. Do you mean that we can use deionized water instead of adding potasium hydroxide to the water to speed up the reaction?
A general view here is... Deionised/ is distilled water and in the process of manufacturing has no particulates, even clean tap water has particulates, this tap water is what turns you're water sludge brown ... The distilled water stays clear clean always... Note I have seen a guy use distilled water in a bucket then stick a hand drill in then put his hand in and turn drill on whilst not being electrocuted .. current won't travel unless via particulates... I.e.. koh.. or .. lye... Or .. backing soda and such... I highly recommend not trying this bucket thing... It's purely as a Learning, teaching concept, current travels across particulates.. no particulates = no travel.. Thom in Scotland.
@@fuelban Hello again Dear sir Actually ' what i need to know is the best motivation material to help in speef up the procesd and make it more effective without consuming a lot of power. Koh or lye or soda from your experience. Thanks in advance
You cannot speed up this process, it's finding the Ballance... You try to speed up by adding more power... Then you create heat and gas sticking to plate surface, this in turn slows the production, current won't pass through air nor Gas. So you effectively slows production as put in current transformer to heat... Find the Ballance my friend ... Thom in Scotland.
@@مجداسماعيل-ف8ق hi... Finding the Ballance... It might assist you to understanding the hydrogen atom separates easier from urine than water, and urine has twice the hydrogen as water, I'm sure if do just a little research on this you'll discover it.. hydrogen separates easier From urine than water. So less power amps needed... Look to Nigeria kids...urine powered generator Nigerian student's... It might be what you want... Find the Ballance my friend.. Thom in Scotland.
Thank you very much for sharing useful tips. Hope to see your new video on this topic
love the reverse writing
Good to see you arent pumping waves through the center of your head with wireless deadphones
Funny
Great video, u are very helpful, im waiting for more!
I would have to contest the theory of using lower amperage increasing the rate of change. This is simple enough to test with a veriable amperage car battery charger. I can say for sure Lye will eat the electrodes depending on the material its made of. Rule of thumb is use cheap materials for testing before committing to more expensive materials.
This can be done with materials cheap enough where there is little cost to replace the parts. This is not an expensive venture.
Another point;
There are several ways to prevent water from entering the intake such as distance the cell is from the intake port, orientation from the port in height, and potentially warming the hydrogen mixture. However you need to know the lower combustable limit and not exceeding it. There are cell designs that accomplish this.
All in all this is a good video.
More interestingly besides other people continuously muddying the waters on if the Hindenburg was sabotage or simply a electrostatic discharge there were 2 simultaneous investigations conducted between 2 avisorial factions. One of them neglected to include details of their findings within their report while making it public.
I sense corporate collusion and history has shown industrial interests Trump the needs of a nation. Think about the money spent on petroleum for the last 86 years, wars fought, and an entire economies based on oil. If it were known that a gasoline engine were capable of running on hydrogen back then, how dramatically this would have altered our history.
The constants steering people away from hydrogen power appear to be for global economics, Power and control. I want a crew list and to know what wealthy individuals were aboard that airship.
Odds are there was a scientist or inventor, or an influential benefactor that knew this secret and had intention on mass producing something that would take away this cash cow.
When J. Edgar Hoover wrote a thank you letter to the author of a book that took the focus off of Joseph Spa it was a read hearing if you also know Hoover’s role in other affairs concerning the arostocracies. Likely why there was mentions of him being involved in homosexual conduct. That is also a red herring. When the powers that be don't want something investigated they associate it with sexual deviency. Most recent was painting Epstien and coded language to pedophilia and sex trafficking. Epstien funded Ai and robotics in large part.
You can use frequency on the water to we weaken the bonds for easier even splitting
there is a company, who claims to get the efficiency higher, by avoiding gas bubbles around the cathode and anode. they are not drowned, more fed buy a sponge soaking up the water. anyway they only work for large scale projects. in other words, with the oil industry.
love your channel.. greeting from indonesia
What if i used a silicon gas kit that is better for me or not? And what about the consistency of silicon gaskit
What type of insulating material between the panels?
#5 what about flowing the H2 gas through a Super hydrophobic micron pore sized sponge 🧽 to keep the water vapor behind?
l don't know. It's worth a try. thanks for sharing the idea.
@@volks-electrolyzersomething similar to this on Amazon, COBETTER PTFE Disc Membrane Filters Hydrophobic, 47mm Diameter, 0.22µm Pore Size, 100 Pieces/Pack
@@davidprock904 hydrophobic is not like a sponge. it is water repellant. you want to use this to raise the Amperage and avoid gas bubbles around your plates?
@@volks-electrolyzer those filters are like a sponge, the smaller the pores in the filter/sponge the better it will be. And if your filter or sponge doesn't hate water, put it in a vacuum chamber with a liquid based treatment to apply to stuff to make what ever be super hydrophobic, submerge it and vacuum out all the air to force it into the sponge completely, pull it out and dry it out and place that inline of the H2 to leave the H2O vapor behind.
@@davidprock904 wow you are genius. What is the W/l for electrolyzer with this sponge?
Hi dear sir
It is valuable information.
I am deeply appreciated.
Do you mean that we can use deionized water instead of adding potasium hydroxide to the water to speed up the reaction?
If you have a pem electrolyzer- deionized. Aem electrolyzer koh
A general view here is... Deionised/ is distilled water and in the process of manufacturing has no particulates, even clean tap water has particulates, this tap water is what turns you're water sludge brown ... The distilled water stays clear clean always...
Note I have seen a guy use distilled water in a bucket then stick a hand drill in then put his hand in and turn drill on whilst not being electrocuted .. current won't travel unless via particulates... I.e.. koh.. or .. lye... Or .. backing soda and such...
I highly recommend not trying this bucket thing... It's purely as a Learning, teaching concept, current travels across particulates.. no particulates = no travel..
Thom in Scotland.
@@fuelban
Hello again Dear sir
Actually ' what i need to know is the best motivation material to help in speef up the procesd and make it more effective without consuming a lot of power.
Koh or lye or soda from your experience.
Thanks in advance
You cannot speed up this process, it's finding the Ballance... You try to speed up by adding more power... Then you create heat and gas sticking to plate surface, this in turn slows the production, current won't pass through air nor Gas. So you effectively slows production as put in current transformer to heat...
Find the Ballance my friend ...
Thom in Scotland.
@@مجداسماعيل-ف8ق hi... Finding the Ballance... It might assist you to understanding the hydrogen atom separates easier from urine than water, and urine has twice the hydrogen as water, I'm sure if do just a little research on this you'll discover it.. hydrogen separates easier From urine than water. So less power amps needed...
Look to Nigeria kids...urine powered generator Nigerian student's...
It might be what you want... Find the Ballance my friend..
Thom in Scotland.
What is the electrode that produces hydrogen?
To increase hydrogen production, do we put in front of it a piece of black carbon?
The DuPont pem?
@@CoincidenceTheorist I don't understand what that means, can you explain to me?
How about breathing the hydrogen or other health stuff? What’s your view
I'm not a Doctor and more related to the energy storage potential. Thanks for the idea.
Do you know anything about the newest design that wicks the water up and makes the process much more efficient?
sounds very intersting. can you link some informations?
0:09
what is the spacer thickness ?.
excact mesurements are the result of a lot of research and investment. these informations are confidential. sorry
@@volks-electrolyzer, and this is what you call useful tips ?.I will tell you from my research that the best spacer thickness is 8 mm .
Nice information..go go go green_energy