A friend of mine needed a repairjob! The cable from his headphones came loose...I soldered it back together and viola: there shall be music! Music by Kevin MacLeod
Yess I do that with my MI earphones and they stil working , but the main issue comes with Mick it will probably not working if you didn't connect with colour codes
+Neon yeah they look very cool and have a nice feeling when wearing them. Unfortunately they are a bit too expensive for my taste and the sound of them is for electronic music only i would guess :D
Bhai ikk help krr do Iski jo machine haina usme galti se feviquick chala gya aaur aab wo haat nhi rha maiko dusri machine chahye wo kha se mill sakte hai bhai Plz reply jarur krna I need your help
No you cannot lol. That's gonna make the whole job 5 times more difficult probably. Adding to the fact that hot glue does not conduct electricity. With the right tools, you can repair it pretty easily. This just requires a bit of concentration and precision.
Hi, I think at the time I tried different configurations, to make sure it would work (which I recommend doing aswell). Typically the minus (-) is a cold color, such as black or white, brown or blue. And the "hot end" (+) is a warm color. These two poles were marked in the little pcb. The shielding of the cable is typically the braided wires from around the whole cable. In some cases, this goes to ground, or in this case, to a separate soldering point. The last cable was for controlling the button and i soldered it to the last remaining spot (which didn't work in the end anyways haha) Thanks for the comment! :D
the only liquids you are allowed or should use while repairjng cables or a circuet board are soldering oil and and the metal zinn (is a metal that fan be easily melted)
Loved the tool kit!
While soldering bro u should explain which wire is conecting which point explaining with your voice. Thanks allot
I have headphone (MH410C) and i have a jack from another headphone and I want to know where to weld the wires in this jack
Which soliderung machine do u use pls tell
jBL Reflect Contour 2 wire ripped slightly near volume adjuster because of which right ear phone won't work, any advice on how to repair?
Kaun sa wire kisme judega samajh(dikh) nahi raha hai, reply
Fantastic.
JBL c100si ka mike thik karke batao sir.. 3 input hai but out port bss 2 hai. Baaki wire kidhar solder karu?
Repair ke leye kon saa pest use kiyaa
Useful Video Dude...
This is extremely helpful :) thanks
Please tell that the wire must be same?
hey even if its no the same colors any wire
Bhiya mara Lenovo Ka headset ha us ke wire ko kasa repair Karu video ma samaj nhi a rha
can'nt we just remove the circuit board and simply connect the wires....
will the earphone still work without the circuit board?
Yess I do that with my MI earphones and they stil working , but the main issue comes with Mick it will probably not working if you didn't connect with colour codes
Hlo brdr mera headphone ka jack kharaab ho gya tha to maine doosre earphone ka jack lgya but mera mic work nhi kr rha kya karu please reply
Star Wars headphone nice haha
+Neon yeah they look very cool and have a nice feeling when wearing them. Unfortunately they are a bit too expensive for my taste and the sound of them is for electronic music only i would guess :D
Bhai ikk help krr do
Iski jo machine haina usme galti se feviquick chala gya aaur aab wo haat nhi rha maiko dusri machine chahye wo kha se mill sakte hai bhai
Plz reply jarur krna
I need your help
How do I even open Mic safely?
can we do it with our hands?? plz tell
Is video ko zoom karke details mai samjao pliz konse colour ka vire kaha sold. Karna hai pliz
I get it all but if u dont have the right materials it's hard tho...
Bhai mere headphone ka bucch wala portion tuth gya hai woh repair ho sakta hai
bhai mera oppo ka earphone hai usme aawaz fresh nhi jata hai kya kru
Is there any method to directly connect the wires??
No bro, but you get this machine from any electronic repair, and take their help for it.
My cable got broke and want to know colours of wire to be soldered...plz help me
Same here, I have razer kraken tournament edition :/
comedy
I don't need that buttons, so if i connect all wires without attaching that button part, will it work?
I'm trying same thing
@@Captainlucifer99 reply if it works
Ok bro
Lyf ka mera ear fone hai left bajta hai. Right nhi bajta kya kare plzz Ripley
Alfiya Shah nale me fekde
thanks bro
Can i get a circut diagram
Na colour dikhe ki taar konsa kahan dikehga
What was that thing that u were polishing on the wire
Flux
Bro can we use mouse usb cable's inner wires for earphones
You should be able to
Perfeito. 👏🏻👏🏻👏🏻
U can slow down the video you know
Bro but in my case i have 2 wires(left and right) they totally has 4 different colours but only 3 soldering tracks????
Bro u can place Both Red and brown in middle and green in left and blue in right and it really works
@@SURENDRASINGH-ys7fo ok bro i'll try
Mr AS some must be soldered together
Can i use hot glue instead of soldering?
No you cannot lol. That's gonna make the whole job 5 times more difficult probably. Adding to the fact that hot glue does not conduct electricity. With the right tools, you can repair it pretty easily. This just requires a bit of concentration and precision.
How r we supposed to know where to solder which wire?
Should have shown that as it was the imp part of the entire video!!
Hi, I think at the time I tried different configurations, to make sure it would work (which I recommend doing aswell). Typically the minus (-) is a cold color, such as black or white, brown or blue. And the "hot end" (+) is a warm color. These two poles were marked in the little pcb. The shielding of the cable is typically the braided wires from around the whole cable. In some cases, this goes to ground, or in this case, to a separate soldering point. The last cable was for controlling the button and i soldered it to the last remaining spot (which didn't work in the end anyways haha)
Thanks for the comment! :D
Shubham Singh when you open it you can tell iy will have 4sot. For. 4wires. Its ez but just take your time
My leeco headphone mic is not working all of sudden... Can I get some help about what to do
But in my earphone there are only two wires . What should I do
Buy new one.
2:05 what are you using before soldering the wire. The one which you are coating with Brush.
liquid flux
10 rs का मिलता हैँ
Soldier 60 Rs ka
Soldier wire 20 rs ka
Nice
Thanks :D
Loan sa wire kisme jode ho Bhai diagram Bana kar bhejo bro
Sir my earphones is also broken
But it doesn't have tha circuit board, i think my earphone is different
I don't hav shouldering machine is their any other option to stick wire to circuit board??
i need the same :/
What was that liquid you applied on that wire ?
the only liquids you are allowed or should use while repairjng cables or a circuet board are soldering oil and and the metal zinn (is a metal that fan be easily melted)
Ab mein itni expensive cheezein mngwaoon😟
Us say acha new hand free hi na lai loon
Bhai koi asaan tareeqa btao😑😑😑
Kuch expensive nhi h
Bas ek lighter use kia h
Uska thora alag hai
Bang cara buka tengah tengahnya gimana
I dont have a shouldering machine thing, how do i do it without one.
Bro mic repair vedio cheyande bro plz
You have to at least tell the steps n slowly slowly show the video..
debashree mohapatra What ?
I agree😏😏
Mute mechanic
Mera Head phone Trace soundkarab hogaya thoda bathaona bhai
Nice
So helpful thank you..
I don't need that buttons, so if i connect all wires without attaching that button part, will it work?
it had switch
Bhai waah
coool
thanks! :D
Muy lejos no se ve.
Indica que suelda .
pls help i want mic so haw to fix that send video pls
I don't have solder and my Lenovo hadsat wire is not like this
Voilà *
I don't have solder
tough luck
Vicky Joshan hehe really
SACHIN KAKADE no bro, i was kidding😂😂😂
Fuck it Iam buying new one
Hi
Bakwas
Te jaise banaya hai na agar bolke banata toh teko bhot sara like aata or comments aata te itna farst banaya hai jo ka bole baba 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
i can do better than this