Same for me. New CSL DD + the SQ 1.5 hifter + 918 RSR wheel + V3 pedals previously acquiered and used with a T300RS... all working fine. CSL DD definitively bettter than the T300 BUT impossible to do the shifter calibration. When sometime I can have 6_n on screen quickly it change to CAL or SFT... at best been able to reach once 6_2 before again CAL or SFT on screen. After each level appearing 6_n ; 6_r etc etc... how long do we have tgo press "OK button" (bottom right button) ???? Should I consider Fanatec product much worst as I could think. I'm extremely upset, thinking to ask for refunding. I heard about a guy who spent hours of attemps before succeeding. Thats not normal. Except telling me ahhh ahh next time buy a simcube or whatever... if anyone got a solution to make this calibration possible I will be very please. Thanks
Updates: the issue was the CSL DD Power Unit cable from the CSL DD base to the booster unit was running on along my sim rig along the RJ12 cable for the SQ 1.5 Shiter to the CSL DD. I have a TR80 rig and for practical and also aesthetic reasons I'm trying to have all my cables (CSL DD unit power cable + CSL DD USB cable to PC + V3 Pedals + Shifter) running all together to avoid a kind of spaghetti of cables. It sounds there was interferences due to cables too close. I properly separated the cables. I also used temporarily the too short for my installation 30cm RJ12 cable provided with the shifter and been able to do the calibration. Then I replug the shifter with a longer RJ12 cable and all working very well. This kind of warning should be in Fanatec guides. I'm sorry but I'm not an electrician and this kind of possible interference don't come to my mind instantly.
Hi I bought new csl dd with new hub for xbox and shifter but not working in 6 games and when in seq mode all button working in game and in xbox byt when change to 8 some bottune not working please help me my hub like in 1:52 thank you
Bei mir geht seit einigen Tagen nur mehr die 7 Gang H Schaltung. Wenn ich auf sequentiell stelle keine Reaktion. Wenn icv auf H Schaltung stelle wird mir die Schaltung im Display der DD1 angezeigt , stelle ich auf sequentiell zeigt er mir keine Schaltung an. Woran kann das liegen? Kalibriert hab ich die Schaltung schon mehrmals. Lg
I tried but when I put my shifter so its connected then the settings button doesnt work
Where are the Buttons on the DD Pro? 😢
The tuning and start button (three horizontal lines) together
@@Hobogoku thanks bud, this helped me a lot
Cheers! Needed that 😎 the Netherlands ✌🏼🚦🏁
Thank you so much helped a lot
anyone here shifter not registering the R and 7 gear? I cant feel those notch
Are you making sure to press down on the shifter before moving it into those gears?
@@shamarneedham1990 Thanks for this comment I had no idea how to get this to work lmao
I spent 45 minutes trying to do this and the wheelbase and as well as the shifter have a mind of there own for me. I can’t get the gears calibrated.
Same for me. New CSL DD + the SQ 1.5 hifter + 918 RSR wheel + V3 pedals previously acquiered and used with a T300RS... all working fine. CSL DD definitively bettter than the T300 BUT impossible to do the shifter calibration. When sometime I can have 6_n on screen quickly it change to CAL or SFT... at best been able to reach once 6_2 before again CAL or SFT on screen. After each level appearing 6_n ; 6_r etc etc... how long do we have tgo press "OK button" (bottom right button) ????
Should I consider Fanatec product much worst as I could think. I'm extremely upset, thinking to ask for refunding. I heard about a guy who spent hours of attemps before succeeding. Thats not normal.
Except telling me ahhh ahh next time buy a simcube or whatever... if anyone got a solution to make this calibration possible I will be very please. Thanks
Updates: the issue was the CSL DD Power Unit cable from the CSL DD base to the booster unit was running on along my sim rig along the RJ12 cable for the SQ 1.5 Shiter to the CSL DD. I have a TR80 rig and for practical and also aesthetic reasons I'm trying to have all my cables (CSL DD unit power cable + CSL DD USB cable to PC + V3 Pedals + Shifter) running all together to avoid a kind of spaghetti of cables. It sounds there was interferences due to cables too close. I properly separated the cables. I also used temporarily the too short for my installation 30cm RJ12 cable provided with the shifter and been able to do the calibration. Then I replug the shifter with a longer RJ12 cable and all working very well. This kind of warning should be in Fanatec guides. I'm sorry but I'm not an electrician and this kind of possible interference don't come to my mind instantly.
Hi
I bought new csl dd with new hub for xbox and shifter but not working in 6 games
and when in seq mode all button working in game and in xbox
byt when change to 8 some bottune not working
please help me
my hub like in 1:52
thank you
Great video helps a lot thanks
How do you calibrate the SQ mode mine won’t shift down?
I messed up and I cannot find how to do it again...
I don't get the 6_n displaying on my wheel ?
what if i mess this up how can i re do it
What if I don't have a fanatec wheel?
rob a bank to buy a complete set
Get a job in mining in siberia
A mining
Bei mir geht seit einigen Tagen nur mehr die 7 Gang H Schaltung. Wenn ich auf sequentiell stelle keine Reaktion. Wenn icv auf H Schaltung stelle wird mir die Schaltung im Display der DD1 angezeigt , stelle ich auf sequentiell zeigt er mir keine Schaltung an. Woran kann das liegen? Kalibriert hab ich die Schaltung schon mehrmals. Lg
My Shifter doesnt work now wow doesnt show eny gears or ingame cant bind any gears top
Thx you ! 😎
Nice Video!
I can’t get mine to go in reverse
are you making sure to press down on the shifter before trying to put it into reverse?
Thanks!!
Nice!!!
Thx
X il McLaren?😢