Hi guys, good teaching videos. May I suggest you make one on changing a wheel on a dual wheel independent suspension caravan with built-in jacking points using a Kojack jacking kit. Thanks.
yep, agree with your choices, all good stuff, just make sure your shifter is bit enough to fit your towball/hitch nut (24mm from memory), most socket sets don't go that big
One thing I noticed was you had nothing that could cut. Be it water pipes, if you need to put in a joiner, or wiring, etc. Also electrical stuff. If you don't have it you have no chance of a dodgy fixing attempt in my opinion.
How about , the stuff that’s not so obvious, wheel bearings, grease, torque wrench, multimeter, kneeling pad & the knowledge that’s not law when you tow?
Sorry, shifters are an accident waiting to happen. Carry sockets and spanners with an adaptor to fit the sockets to your cordless drill. Also take polypropylene (Sikaflex is ideal), not silicone, which is utterly useless for waterproofing anything.
Hi guys, good teaching videos. May I suggest you make one on changing a wheel on a dual wheel independent suspension caravan with built-in jacking points using a Kojack jacking kit. Thanks.
Thanks
yep, agree with your choices, all good stuff, just make sure your shifter is bit enough to fit your towball/hitch nut (24mm from memory), most socket sets don't go that big
Carry some fencing wire. It's got me out of trouble a few times now.
Good advice....a little inexpensive multi metre is handy also
Yes, true
One thing I noticed was you had nothing that could cut. Be it water pipes, if you need to put in a joiner, or wiring, etc. Also electrical stuff. If you don't have it you have no chance of a dodgy fixing attempt in my opinion.
No lIst? Good info thanks.
Open the more info section under the video and there is a sliding time thumb nail that lists all the tools.
Thank you Boeta.
👍🍺❤️🇦🇺
How about , the stuff that’s not so obvious, wheel bearings, grease, torque wrench, multimeter, kneeling pad & the knowledge that’s not law when you tow?
Sorry, shifters are an accident waiting to happen. Carry sockets and spanners with an adaptor to fit the sockets to your cordless drill. Also take polypropylene (Sikaflex is ideal), not silicone, which is utterly useless for waterproofing anything.
Could barely hear him speak, the music's so loud! 😆