Pretty sweet, the rigs are coming along nicely 👍. Thanks for always sharing your tips and tricks.. Here's one for you. - I always COMPLETELY pack my axles with grease ( like it squeezes the excess out while closing). It keeps the water out and adds weight low down. And also LEAD bbs or golf weights(bendable strips) in the tires if you don't wanna spend on the brass (need fewer with lead and lead is quieter than copper). Now , Go Run That RC 😁
My shocks leaked out of the box as well I replaced the oil with 30wht and seemed to help! They also seem to stick a little I replaced them with the aluminum ones seems a little better but still not as smooth as you’d expect
SO I just got a Trx4M More for TRAILING and driving threw woods Roots and leaves. Crawling around my house is not many rocks or streams. I’m not going to use it in rain or mud. Should it be ok . I was going to keep it Most stock. But I do want tires with foam. But I haven’t use it yet. Great videos man. I hear this truck is outstanding. I know people don’t like the controller, but I don’t mind it.😊
@@ironj100 you can use heat shrink to protect them. I don't use wd40 on my RCs unless your trying to coat the plastic parts but they can turn some plastics bendy.
BRKRC Tires:
amzn.to/3jvpd89
Fun video. The Bronco has a torque lean to the right.
it definitely does. I added a shock preload spacer to that side and its better.
Pretty sweet, the rigs are coming along nicely 👍.
Thanks for always sharing your tips and tricks..
Here's one for you. -
I always COMPLETELY pack my axles with grease ( like it squeezes the excess out while closing).
It keeps the water out and adds weight low down.
And also LEAD bbs or golf weights(bendable strips) in the tires if you don't wanna spend on the brass (need fewer with lead and lead is quieter than copper).
Now , Go Run That RC 😁
good tip!
Don’t forget to always “grease those gears”.😂
I glue my tires on traxxas wheels.
With soldering yes just make sure your polarity is right on your leds
for sure
how do you keep the orange lights on
This isn't the TRX4m light kit. Its standalone electronics.
Bronco is looking good. Do you have a video on how you installed that 1080 esc
I don't have a in depth installation video but I show it a little more on my esc upgrade video. Should be in this playlist.
@@RunThatRC sweet dude!! I'll look for it
Would those bead locks go on the WPL-c43 ?
the hexes are a bigger diameter than the wpls.
When’s the video on how to stop the shocks leaking coming out? Can’t get my shocks to hold oil
I actually have a short video on my theory on why some of these leak and some don't coming out soon.
My shocks leaked out of the box as well I replaced the oil with 30wht and seemed to help! They also seem to stick a little I replaced them with the aluminum ones seems a little better but still not as smooth as you’d expect
SO I just got a Trx4M More for TRAILING and driving threw woods Roots and leaves. Crawling around my house is not many rocks or streams. I’m not going to use it in rain or mud. Should it be ok . I was going to keep it Most stock. But I do want tires with foam. But I haven’t use it yet. Great videos man. I hear this truck is outstanding. I know people don’t like the controller, but I don’t mind it.😊
Truck should be fine stock. Get tires and wheel weights and it should be good to go trailing around. Maybe an extra battery for more run time.
@@RunThatRC I READ WD40 is good for the O RINGS so they don’t Rot. OR PUT SOME KIND OF TAP. I GOT THE DEFENDER. THANKS MAN FOR THE IMPUT.
@@ironj100 you can use heat shrink to protect them. I don't use wd40 on my RCs unless your trying to coat the plastic parts but they can turn some plastics bendy.
Tires rubbing…try smaller set original wheels and upgrade bushing to bearings and try that run again….