HOW TO: Disassemble, Reassemble & Repair Pondmaster AP-100 Air Pump

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • Watch how to disassemble, reassemble and repair the Pondmaster AP-100 Air Pump with the Pondmaster Diaphragm Repair Kit.

КОМЕНТАРІ • 19

  • @stayhumble2388
    @stayhumble2388 4 роки тому +2

    Thanks! Btw, You should provide a link for the repair kit. It will help you & the consumer. :)

  • @junaidiabdilah89
    @junaidiabdilah89 4 роки тому +1

    Thanks for the video, it's help me for repair my Resun LP 100

  • @biplobkhan479
    @biplobkhan479 5 років тому +1

    Wanted all type of biofloc airpump makind and repair video. Thank you. I am from Bangladesh.

  • @dirteatr
    @dirteatr 5 років тому

    Thanks for the video, used it today helped me out ✌

  • @larrywiseman
    @larrywiseman Рік тому +1

    Can anyone tell me where I can purchase the small check valves separately? I almost never have a torn diaphragm, but the check valves dry out frequently.

  • @contentninja5588
    @contentninja5588 3 роки тому

    Does it have NRV (non return valve) system inside, that stops Air from coming back from outside

  • @legendfpv
    @legendfpv 4 роки тому

    Can the old diaphragm be repaired?

  • @uscstaylor
    @uscstaylor 4 роки тому

    The user is not restricting any part of the diaphragm it’s just a weak ass product, I went to replace my diaphragms and noticed that the screw 7 mm head is snapped off so I can’t even get the screw it back on to replace it, again it’s a flaw in the product.

  • @gregesterhuysen7979
    @gregesterhuysen7979 6 років тому

    Hi Steve, I have the LP-100, which is exactly the same. I replaced my diaphragms and unit is working, but I find the volume and pressure of air is about 40% less than my new unit I purchased the same time as the parts. It is not the valves, as I swopped it from new unit and still the same. So it must be the new diaphragms. It seems slightly stiffer than those of new unit, so it could be old parts. Should this units run in first before it reaches top performance or should it be pumping at full spec from the start.

    • @BrentonCollas
      @BrentonCollas 4 роки тому

      Rebuilt my resun lp40 with new diaphragms and flappers today and had the same experience. Any update with your experience Greg?

    • @MrWiskin
      @MrWiskin 2 роки тому +1

      @@BrentonCollas You need to clean the flapper valve seats as they get dirty!

  • @moloyghosh2122
    @moloyghosh2122 5 років тому

    Dear sir please tell how many nos of 10000 liter biofloc tank can blow as per bellow mention areator pump.
    80L/min=...............Liter
    100L/min=..............Liter
    120L/min=..............Liter
    200L/min=..............Liter
    280L/min=..............Liter

  • @johns.1940
    @johns.1940 2 роки тому

    Used this video and it worked. Then the pump died an hour later......not sure what happened.

  • @aheimsvensson1573
    @aheimsvensson1573 3 роки тому +1

    I would never buy a pump this awkvard to maintain

  • @sunilmore5888
    @sunilmore5888 5 років тому

    Sir.air.pump.prise.kit I.hai.
    Hu

  • @johnkientzler6354
    @johnkientzler6354 Рік тому

    Holy crap ...way too much detail.

  • @leam89
    @leam89 6 років тому

    This seems way more complicated than it needs to be. Like the differences between replacing spark plugs in a honda vs a subaru

  • @leam89
    @leam89 8 місяців тому

    "the plastic ring in the diaphragm does not wear out and does not ever need replacing" false statement. Its made of brittle crappy plastic and breaks easily. This pump is a frustrating pile or garbage after a few years.