Chainsaw Stihl : MS 251 and MS 390
Вставка
- Опубліковано 14 вер 2021
- Chainsaw Stihl : MS 251 et MS 390
à gauche / left : Stihl MS 251
45cc - 2.2KW / 3 CH
Guide 40cm/ 16" - 3/8 - 1.3
à droite /right : Stihl MS 390
64cc - 3.4KW / 4.6 CH
Guide 45cm/ 18" - 3/8 - 1.6
Qualité vidéo : 1080P - 60 fps - Розваги
Looks like ms251 has a dull chain and looks like you ain’t using all its capabilities
Amazing
I'd give the followers on the 251 a stroke or 2 with a flat file, sawdust seems a bit fine and I know the motor's powerful enough to pull a bit extra.
These tests tend to be a bit "unscientific" because (as long as the saw is powerful enough) chain geometry is the most relevant factor for cutting speed imo.
And even if both chains are new they aren't necessarily identical.
Thank you for your comment, indeed the chain of the MS 251 was less good than that of the MS 390 (which was new). the comparison is therefore not fair.
Basically I just made this video for fun and sharing and it got a lot of views!
I would like to do a video again on occasion with chains in good condition
@@twosparkstroke9870 If you wanted to be really geeky about it, you could use the same chain and bar on both saws!
I guess there are a lot of chainsaw nerds out there :)
Well, a "laboratory testing" and "live testing in real conditions" there is a huge gap.
Its not important "in perfect conditions" but is important in real conditions how one product performs.
This video is NEAR perfect comparison because it shows the reality in real conditions.
Yes, the push force for both chainsaws must be the same for fair testing, but "real conditions" that means, to adapt to natural conditions.
@@thepreserver83 Nobody mentioned "push force" and it's much less relevant than chain geometry (different in different products, the "followers" are the nubs on the chain which determine cutting depth+speed). Different chains are gauged differently, and the two saws are not using the same one. Also, as OP said, one chain is new while the other is used.
"Real conditions" - For most of every chain's life, it is not new. So if you want your "adapt to natural conditions" version of the experiment, both chains should be filed evenly, as I suggested.
This comment comes across a bit like you've mucked about in the backyard a couple times and convinced yourself you know what you're talking about, stay safe out there. And please don't go wild on your followers, it also makes your saw much less controllable, albeit faster.
SORRY ! Indeed, the chain on the MS 251 is dull.
I just filmed it for fun. I didn't want to offer a perfect comparison.
Thank you very much for all the views :)
The 251 is a homeowner saw while 390 is a rancher saw that costs almost twice as much. Doesn't help that you aren't really trying with the dull chain on the 251.
Yes the chain on the MS 251 is dull. i know... lot of comment..
I just record for fun. I didn't want to offer a perfect comparison.
Wow
Stihl Gutta Boys 👍👍👍
👀👀👀👍👍▶️
Na tej 251 nieje nabrusena reťaz len robíte reklamu 390 tke
This comment comes up often, indeed it may be that the chain of the MS 251 is more damaged. No, I don't do false advertising (I don't get anything from anyone). I just made this video for fun 😄😉 A new video with two new chain would be great
Stihl Ms 251, are lanțul ne ascuțit! Pentru a face senzație 391! Dezgustător video!
Indeed the chain of the MS251 was not perfectly sharp, but still not bad. And that of the MS 390 and not 91 was new.
However there is still a difference ... even if I prefer the power to weight ratio of the MS251.
stihl 251 are 45,6 cmc si 3 cp si 390 are 64 cmc si 4,4 cp e normal sa taie mai repede am ms 390 si stiu prea bine cum taie.
@@adi123q Da te cred! Dar una e 2-5 secunde avans la o tăietură și alta e de la 10 secunde în sus! În cazul de față diferența e prea mare! Se poate observa clar că 251 are o problemă la garnitura tăietoare, am tăiat cu 230 și știu cum taie! 251 e superior la 230. Sigur 251 nu poate depăși 391 dar poate ține sub 5 sec diferență la grosimi mici și medii!
salutare! imi poti recomanda o lama si un lant pentru ms251? as incerca ceva de la oregon, pot exista incompatibilitati? multumesc!
@@mihgio3235 Pot! Dar să fie originală de Stihl ? S-au altceva mai puțin calitativ ?
Yea, not even a real comparison. Do it again both with new chains
Üdv
Jó videó!
Felíratkoztam 🤝👍✌
Thanks friends !
Получается 390 лучше??
MS390 мощнее, но намного тяжелее. Я считаю MS251 более сбалансированным
The MS390 is more powerful but much heavier. I find the MS251 more balanced
Окей
Hogy lehet így fát vágni 😂😂
popppp
I have a little 034 would be faster than the 251, definitely looks like you're deliberately going slow.
The 034 is bigger than the 251....
@@cujofire594 Indeed a 034 is much more powerful than an MS251!
4,1 PS vs 3 PS 😂😂
It wasn't a fair test! You'd make us believe if we knew nothing.
а хто вас так вчив пилять ??? я просто вжав її вниз вона аж стає а для чого ви чиркаєте
A
Cómo se atreven a publicar lo prohibido, la deforestación y nos quejamos del cambio climático
Élezd meg a 251
No así mantenga la motosierra horizontal
Un moteur deux temps peu fonctionner dans tous les sens.. aucun soucis de ce coté ;)
Człowieku ty ciąć nie umiesz..........
coś słabo to wygląda ,to moja ms 171 lepiej tnie...
Bo łańcuch tępy
No offence, but you have a weird way of cutting. just go straight down, not up and over too much.
Don't worry, I wouldn't be offended. Lots of reviews here, at least yours isn't about the chainsaw chain ;)
Хватит дурачить людей, я знаю что такое 251, такую бревну я пилю за 5 секунд...