Awesome video! What were some of the symptoms of the bad stator? I have an e series kdx200 and the po had replaced the source coil years ago and I think I'm having similar problems he had. 0-.25 throttle it's fine but as soon as I open it up it bogs and pops and bangs and backfires.
Hello again! I've just examined my motor and found a leak, too... :( Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
i've opened magneto cover and discovered a huge amount of black oil or carbon... is it seal damaged or those leaks you've just show us? uhm... what should we do with those leaks?! new crankcase? (
fxgtlive pressure test your crank case, like he shows in the video. if the crank seals are leaking, split the cases and replace the crank seals/bearings. if it's just the case leaking, jbweld it !
I made the video. I fixed it by getting the cases HPC coated on the inside. Its a thin ceramic coating. No more problem. Cost me around $80 NZD from what I remember
Hello again! I've just examined my motor and found a leak, too... :( Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
Lot to love Kawasaki putting the crank seals inside the casing meaning an engine split for a leaking crank seal.
Where did you get the components for the crack case compression test? I need to make one as well. Thanks
Thanks for the video.
I need help reinstalling my stator. I noticed 4 taps for screws. The stator appears to only use 3 screws to mount. What its the extra tapped hole for?
Awesome video! What were some of the symptoms of the bad stator? I have an e series kdx200 and the po had replaced the source coil years ago and I think I'm having similar problems he had. 0-.25 throttle it's fine but as soon as I open it up it bogs and pops and bangs and backfires.
Mate that's exactly what's mine is doing ..what was your cure.cheers Bryan
Hello again!
I've just examined my motor and found a leak, too... :(
Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?
what happen to stator corp in mass?
Nice video bud !
i've opened magneto cover and discovered a huge amount of black oil or carbon... is it seal damaged or those leaks you've just show us?
uhm... what should we do with those leaks?!
new crankcase? (
fxgtlive pressure test your crank case, like he shows in the video. if the crank seals are leaking, split the cases and replace the crank seals/bearings. if it's just the case leaking, jbweld it !
+fxgtlive clean the shit out of where the leak or leaks are and get permatex in a cheeze wiz can. best shit. napa has it.
I made the video. I fixed it by getting the cases HPC coated on the inside. Its a thin ceramic coating. No more problem. Cost me around $80 NZD from what I remember
Wow
Hello again!
I've just examined my motor and found a leak, too... :(
Should I split crankcases and weld it from the inside or should I use some sealant from the outside? What can you suggest?