Technical Drawing Strip Foundation Detail
Вставка
- Опубліковано 9 лют 2023
- Adjust your setting to max resolution when watching.
A strip foundation detail drawn the traditional way.
750mm x 300mm Strip, 900mm below Ground Level
Internal Floor 150mm above Ground Level
Cavity Wall
102.5mm Red Facing Brick
50mm Clear Cavity
100mm Insulation Batts
100mm Insulation Block
12.5mm Plaster and Skim
Floor Construction
50mm Screed
100mm Concrete Slab
100mm Rigid Insulation
Damp Proof Membrane
25mm Sand Blinding
150mm Hardcore
cheers, doing my christmas exam tomorrow this was the only bit i struggled with because of the maths
Thank you so mucn, helped me in my course.
Glad you have found it helpful 😊
thank you for this, helped a lot
You're welcome! 😊
You are just drawing or you follow the measurements that they gave you?
I am using fairly standard measurements that are acceptable under UK building regulations. Min depth 750mm from ground level for frost protection. I would work out the sizes and thicknesses that you wish to use before drawing and follow this as a guide to the process.