How to Build a Pickup Winder
Вставка
- Опубліковано 14 жов 2024
- How to build a pickup winder. We will take a trip through how I built my pickup winder. Ill be going over all the parts, where i got them and how much i paid for them. See link below for products similar to what i purchased. Thanks for watching!
Subscriber Builds.
👉Aaron Pelfrey Pickup Winder Video-
• May 18, 2019
🚪Amazon Associates Product Links--
👉LCD Punch Counter-- amzn.to/2zx1w85
👉Motor-- amzn.to/2Lj2gR1
👉Speed Controller --amzn.to/2HrORVP
👉DPDT Switch-- amzn.to/2JNgiuz
👉Power Supply-- amzn.to/3h9DnXt
🚨DISCLAIMER: This video and description contain affiliate links with Amazon Associates Program. As an Amazon Associate I earn from qualifying purchases. When you click on a link I receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
👉Please Visit my Website for more info on this Video and all my projects in one place.
www.cwkshop.com
👉Free Plans-
drive.google.c...
This is a great video.I built a pickup winder several years ago and threw it out when I moved. I was planning to make a new and better one. That was 19 years ago and I still haven't built one. The winder in this video is similar to several I've seen on UA-cam, which means it must be a good design. I was impressed by the bobbin mount. None of the other UA-cam winders have that. I have ordered the parts for a new winder, which will be a lot like this one. I found the parts at very low prices from an Asian source; however, I take a buyer beware approach toward this source. The motor, counter, and speed control cost $16 including shipping.
Hey guys just letting you all know I added a link in the description to plans for this build. Hope it helps. Thanks!
Chase'sWKshop - Chase, I enjoyed your winder video and plan to watch your other videos. I also subscribed. Regarding that particular digital counter, I have found that it is inaccurate above (around) 100-150 rpm (counting once for every 2-3 revolutions). The way I discovered this is, I wound a few hundred turns with thin sewing thread. Then I unwound the bobbin by hand and counted the turns. It was way off every time by at least twice as many turns on bobbin. I tried 2 identical counters and switched sensors with nearly the same results every test. It was a real bummer, ordering from china takes 2 months sometimes.
thewhitemustang awesome man. Thanks for subscribing. I really haven’t done a test like that on it but if you say that then I will look into it. When you did the test where did you have the magnet in comparison to the shaft of the motor. That’s one reason why I moved it out as far as I could from the center was to try to keep that from happening. Have any idea of a better counter for it? Thanks for the comment and the help, also welcome to the channel bud.
Thanks a lot for this and for listing the components needed, the price of these electric winders is ridiculous and building one is such a buzz, looking forward to it.
I have been considering building one myself thanks for the how to.
Thanks for the plans Chase...you saved me A LOT of time trying to figure a winder on my own. Keep up the great videos!
Chase, not sure if you'll ever see this but THANKS... this has demystified it all to allow me to commit to building one. The thing I want to do is automate the random 'scatter' alignment and avoid the manual guiding of the wire. I imagine one or two cammed mechanism out of phase that repeat and duplicate the left/right scatter pattern for a given run of wire (7k winds avg.) Something that systematically - for example - alternate left/right movement of the guide quickly for 15 seconds then followed by slowly for 20 seconds, then 45 secs.. etc. The purpose being to be able to replicate a pickup that comes out with a great sound. In other words.... not predict randomness but replicate it as much as possible.
You’re welcome bud! If you figure that out I’d love to see a how to on it. I know highline guitars has a simi automated winder. It uses cams to scatter wind the wire. It still uses a lot of user input to run though. Glad I helped you out and let me know how it goes!
I’m a 40 year professional mechanic and I think you did a great job of it. I want to build one and I wouldn’t change a thing. Thank you brother!
Bruce p thanks bud. Glad you like it. Let me know if you need anything.
LOL I know what you mean @5:50 ( Sometimes a problem ) Back in the 70s There was no place to find pickup parts let alone a winder. It's great that you posted this video. Like most of us kids we did not have the money to buy a new guitar so we tired to soup up what we had.Replacing pickups was costly so we had no choice. I have so many projects I forgot I have them LOL. Any who Great video. Thanks for posting. c];-)
Haha yea I’m the same way. Why buy when you can possibly built it lol. Glad I was able to help you out bud. Welcome to the channel.
Thank you for this. I'm building this for sure.
You’re welcome. Glad you enjoyed it!
This video sets the gold standard for diy info. Clear and concise, hits on often overlooked aspects of design and construction, offers insight and improvements on the design. A highlight for me at the end of a gloomy week. Thank you.
Thanks bud! Glad you enjoyed it!
Thanks Chase, very useful information and guide about a diy winder. I'll try to make a single core pickup if I managed to built it.
Awesome bud!!
Great job! Looks awesome!
I've ordered the parts similar to yours and when I build it I'll make a video too. Thanks heaps for your advice!
Awesome bud! Can’t wait to see it!
Great video man. Keep em coming.
Way to go Chase Best video for building a winder iv'e seen so far... 1st one you say?,,, Fantastic Job. Thank you for posting the URL's for buying the parts,, alot of guys don't do that :)
Thanks man! No problem. Glad I could help you.
Great information! Whether it was your first UA-cam video on not, it made sense and got the point across, bloody well done, thanks!
Thanks for the kind words bud. Glad you enjoyed it.
Great video Chase! Just starting to think about winding my own pickups so doing the research but really appreciate the effort you've taken to put this video together - it's a great help to a newbie! Good luck with your business! :-)
Please make more videos great to watch and learn from.
Bruce Barron thank you! I
Thanks for posting this video Chase, I really appreciate it. I've been wanting to build a winder for years and could never quite figure it out. I've already ordered my parts and they will be delivered today. Can't wait to build this winder!
Awesome bud! Glad I was able to help you out! Thanks for the kind words and hope you get it going soon!
Good job Chase..well done.
Rob Maguire thanks!
Borrowed the photos. You hear it all the time but I will hit you up when I get my check. My word is my honor.
Smart young man and I know you will go far
Chase, you're killing it! This is exactly what the fuck UA-cam should be used for. It's refreshing to find an informative, humble, comprehensive approach to building these overpriced luthier tools. You are a goddamn rock star, keep doing what you're doing brother. ✊
Thanks bud. Hope to have some more videos soon. Glad they helped you. Let me know if you have any ideas for a video. Thanks again.
A video on how you do your headstock logos would be rad.
Try this.
ua-cam.com/video/IEW9eXfmB8I/v-deo.html
Excellent video Chase ...
Thanks!
You have a very simple and basic machine here my friend. I thank you for the idea and I plan on building one myself. Thank you!
Wallace Sheckells awesome bud. Glad you like it and let me know if you have any questions. Welcome to the channel.
Excellent video!
This is great man! Gonna have to give this a go soon!
Have a great day and thanks for the video.
Awesome. Very easy to build and it’ll get you going on this pickup building addiction 😂 Thanks!
Thanks, Chase, a nice detailed explanation
Best 1st video of all time...
Thanks...
Gunnslinger777 thanks bud!! That means a lot to me!!
I don't know how in all my searches over the last months didn't come upon this video and design sooner. This is the the best one I've seen, and your clear cut explanation is great. Awesome job, Finally I have a cost effective, easy design that makes sense. Looks like I found my build! Thanks so much
Michael Copado thanks bud. Glad I could help you out. Let me know if you have any questions. I also have a pdf of the parts in the description if you want to look at them to build it. They’re printable and full scale. Maybe they will help you out. Thanks again.
Nice! This is the best winder video I've seen. Simple to build and it's not overkill.
Subscribed.
Modern Relic awesome man. Thanks. Welcome to the channel!!
Nice simple build and does the job.
Thanks!!
I loved your build. Looks great and works perfectly. Thanks for sharing your knowledge!
Cristóbal Bustos Lobos you’re welcome bud! Glad it helped you out!
Creative and inspiring thanks
Do you know a way to make and wind/coil your own strings? (Low strings) diy at home? Thanks
hi, you did a simple and efficient job for use. You gave me the inspiration to design a similar one.
You were right to use a 12V motor with little effort so you can brake it and reduce the risk of breaking the copper wire. I intended to use a 400W sewing machine scooter with foot switch. What you've done is definitely more suitable for that kind of work!
Thanks Andrew
Andrea Politi awesome glad you like it. If you haven’t seen the Pickup Winder 2.0 series videos, I use another motor that’s a lot quieter and faster but you’ll have to build a speed reduction pulley to run it at a lower speed. Glad you like the videos. Thanks for the comment!! Let me know if you need any help with anything.
@@ChasesWKshop
Hello! As soon as I can I will give him a look! Thank you!
Great build! I've had the plans for pretty much the exact same winder for several years now and have just never built it. I found them on some old forum and just found all the parts on amazon and saved them to a wishlist and forgot about them. Looks like its time to finally order them and make it happen. Thank you for taking the time to explain every part of your build and how things worked. Thank you for sharing!
Nathan Snyder heck yea man. I’ve looked at about every forum and video on UA-cam about building one. Glad you like it. If you need any help let me know man. Thanks for subscribing and welcome to the channel.
@@ChasesWKshop Thanks man! I appreciate that!
Brilliant video. Just getting in to building my own pickups. Your video is so informative. I will be building one of these taking into consideration your comments about how you would have done some things differently. Thank you.
Bonny Wood Guitars awesome thanks for the comment and welcome to the channel!
Thanks for sharing man, great video! Answered a lot of questions for me and I do greatly appreciate it
if you'd use a set screw instead of a bolt you might eliminate the vibration. I need to build one of these puppies!!! thanks for posting this!!
Thanks for the comment bud! You're exactly right! I had all the best intentions in the world to add a 1/4 20 set screw instead of that huge bolt LOL but as you can see I never did it. I guess its time. Glad you like the video. If you need any help building one let me know. Thanks again!!
I have no idea what happened! UA-cam posted that reply 35 times.
Thank you, Chase. this was very informative!
You’re welcome bud. Glad you enjoyed it.
Love the video and will build. Hey Chase, your vibration is from the bolt that tightens the bobbin to the shaft. Drill and put an identical one on the other side, with just a little glue on it. Put a touch of fingernail polish on the one you tighten, to differentiate it from the stationary one and end that vibration. PEACE
Ted Rowland thanks for the suggestion bud. Glad you like the videos. Let me know if you have any questions!
Thanks for the video! I plan on building one of these. I was considering buying some Seymour Duncan pickups for my first guitar build, but those are quite pricey. Plus, I’m like you and I enjoy building things. I subscribed! :)
Jonathan Keith awesome bud glad you like the channel. If you need anything let me know. Welcome to the channel bud!!
For some time I've been watching videos of people building, or should I say, "over-building", pickup winders. I mean, heavy-duty motors, 1" diameter shafts with industrial-strength, pillow block bearings, pulleys, V-belts...on-and-on it goes. It all seemed complete overkill to me and I kept wondering why I couldn't just use an inexpensive, direct-drive gear-motor and be done with it. No pulleys, no belts, no drive shafts, no bearings, just the gear-motor with a speed controller and a mandrel to hold the bobbin. I never built it because I figured if nobody else was doing it, my concept must be wrong. Happily, I saw this video and immediately put my own plans into action. I now have a perfectly functional winder that cost me about $30 to build using an old R/C airplane motor speed control I had lying around, a cheap gear-motor, and a cheap, magnetically-triggered LED counter. Works perfectly. Thanks for the vote of confidence, Chase!!
John Heffelfinger awesome man!! I’m glad I could help you out. Thanks for watching and for the compliment. Any questions, let me know bud.
I love it and I love building stuff I make my own electric guitars and been thinking about winding my own pickups ... I think I’m gonna go for it thanks for the video
Timmy Ferrell awesome bud. Let me know if you need anything.
Awesome job, and thanks for sharing!
EvLoutonian thanks!
Nice job! Simple and effective. I’m gonna use some of these ideas. Thanks for sharing.
michael collins Thanks. Glad I could help you. Let me know if you have any questions about it. If you have any suggestions for future videos related to the topic let me know too. I’ll help ya anyway I can. Thanks again.
Very cool, great job!
So easy and cost effective, you go me making another gadget for guitar building always wanted to give it a go.
Awesome glad it helped you. Thanks.
Excellent! Thanks so much for posting this. Good luck on your channel.
stratitude thanks bud. Glad you enjoyed it.
Awesome video, thanks for the inspiration. I just made mine today.
One thing you might want to reconsider is that single bolt being used as the fixing, which makes it unbalanced as it turns. You might want to fix the bobbin holder to the spindle from both sides to balance it better (and consider using grub screws or something smaller than that heavy bolt). Should make it run a little smoother and mean less wear on the DC motor :)
Great man!! I’m glad you like it. Yes you’re right I should get rid of that big ole bolt and change it to something smaller lol. At the time I made it I just threw it together. I originally planned to make more bobbin holders and never did. Glad you like it man and hope you enjoy it. Thanks for the comment and the advice!! Welcome to the channel!!
Great job! thanks for sharing
Fernando Canal you’re welcome bud!
Hey Chase, I have gone through several iterations of homemade winders, have actually wound 4 working pickups (one tele bridge and a strat set modeled after the Fender V-Mod), still looking for something stable and convenient. I say great job on yours. The changes you mentioned sound like good advice. WooHoo.
Thanks, glad I could help you out. Any questions let me know.
I just checked out your other videos. Looks like some cool things I would be interested in. Just subbed!😀
74dart man awesome thanks man. Glad it helped you.
@@ChasesWKshop yep!☺
Just built one from your plans, badass man I appreciate all the help!
Aaron Pelfrey great glad you like it. Let me know if you need anything. Welcome to the channel!!
Is a 4000 rpm motor good for this. 12V DC???
Thank you,
I didn't want to buy an expensive machine that I may not use very often. Your video is a big help!!!!
B
There should be a motor in the description of the video along with other parts for the build. I’d try to find something that’s a little slower than 4000. Also the counter can only count up to about a 1000rpm. I never wind mine faster than 700-800 rpm.
Thank you Chase! Good video, great suggestions for improving it!
Christopher Dann you’re welcome bud. Glad you liked it. Welcome to the channel!!
Hey Chase, I’m gonna rebuild this, this weekend out of extrusion and draw and print up some mounts for this motor. I have a lot of Item extrusion laying around here as well as a bunch of Delrin lol. Once I get it drawn, I’ll send you some 3D printer files for the mount and anything else I come up with, you can throw it on there with your plans. I’m an Engineer as well, so if you want anything else drawn up man give me a shout. No charge
Aaron Pelfrey awesome man!! Make sure to send me pics of it too so I can share them. I really appreciate the help man. We’re all better together. I’ll let you know if I need anything. Nothing like having an engineer you can dial up. Thanks bud!!
I’ll send u some pics and anything I change man, I was thinking about it at work today and I think it would be great if the motor had a thin mounted face that’s 3D printed and you could mount that to the box. I think the mounting threaded holes in that motor are 4mm. I’ll keep u up to date. Love the channel man keep it up
Aaron Pelfrey sounds good bud! Can’t wait.
Hi Chase, Love your videos. Have you done anything with making suspended pickups for a hollow body archtop jazz guitar. I'm looking for how you would approach this since their much thinner than a standsrd pickup the is mounted through the guitar body.
Thanks for the compliments bud. I haven’t felt with any arch top type pickups but may be I can look into it. What type pickups are you wanting to build?
Can you post wiring diagram, how you wire 3 way switches?? Please
hey men great video, great to see this is your first video. I'm waiting for all the stuff to build my own, have the same counter. I have no idea how it will come out but it's great to see your process. I have same questions about which swich to use for what but I think as you said with changing the counter position that will come with practice. maybe you can reduce the long screw for the pickup base wood? to get less resistance in the spins ... it's an idea. I'm going to use a circular acrylic instead but we will see how that goes.
Awesome! Let me know if you have any questions! I’ll be glad to answer any questions.
@@ChasesWKshop all in my head are questions at the time I didn't receive anything for the build yet, and a lot of anxiety is going on here haha I don't know If you can respond to this but one question I have is how much power makes the motor because I didn't use a heavy material for the box and bought a metal enclosure like DIY electronic kit (not so heavy) so I don't really know If I should A-make a mounting clamp to a table. B-Mount it to a square piece of acrylic. C-A square piece of wood.
Also, put some rubber furniture things on the corners?
As I said a lot of questions my friend hahha
@@fideldiazmusic you can mount it to anything. I’d use a piece of wood or the white shelving board you can get at most home improvement stores.
@@ChasesWKshop ok, Yeah I have a piece of wood from a Chest of drawer to use in that case
@@fideldiazmusic awesome bud. Be sure to send me some pics of it when you’re done. I’d love to see it.
Thanks. I appreciate the information. I'll be making a coil winder soon. I want to build my first electric guitar. I'm part of the Greenville Woodworkers Guild in South Carolina. There's a person there who builds instruments and can help me and I have access to all the best machines and wood. I'm finding out that the hardware and electronics are what seems to cost the most. I thought that if I could make my own pickups I could save a little bit and be able to experiment a bit.
Awesome bud. Yes the electronics and hardware are defiantly the most expensive part of a built. That’s awesome you have a luthier to learn from. I’ve just done trial and error to learn lol. Let us know how it goes once you’re done. Also share you build. You’re welcome for the info bud let me know if you have anymore questions.
@@ChasesWKshop
I was just thinking that I could use a wood lathe with a variable speed drive to wind coils. The Guild has several. All I need is a counter and a wire guide. I can use a face plate with a disk of wood to mount the coil and sensor magnet. The wire guide can go into where the tool rest goes. Boom! I got a coil winder for the price of a digital counter.
thomas newton absolutely bud. I’ve seen many of them. Let me know how it goes.
Very nice.
Yosemite Sam thanks bud. Glad you like it!!
Man I really like that build Keep It Simple, I was thinking about building one like the old lawler book showed. But now I like your build better, less parts and straight forward Brother. I build cigar box guitars and want to wind my own pickups, I love building stuff Too.
Keep up the good work !
Thanks man. Glad I could help. If you have any questions, let me know. In my video, “how to build a pickup part 3” I use it if you want to see it in action.
Do you have one for sale ? Thanks for the instructional, awesome!
You’re welcome bud. I don’t have any for sale unfortunately. Thanks for the kind words!
I guess I'll just have to build one !
Going to build one shortly! Awesome. Got recommended to from a friend
lihafy awesome bud. Let me know if you need anything!!
Great video thanks for this information
Elliott Melan you’re welcome bud.
Hello, i build a similar winding machine just with different counter, but almost same design. I think i having a problem with motor gear. I think it have some kind of wigle in gear axle and the bobbind holder when im winding get some shaking. I think thats causing that i have loose winds on bobbin. Do you have same problem ?
Hey man, love your videos! Do you have links for the 3/16" rod and shaft collars you used? Seems like the simplest part, but I'm having trouble finding ones that fit together easily!
Check McMaster Carr. I started using a little bigger guide size of 1/4”. You might be able to find one that size at a local hardware store. The shaft collars may need to be ordered online. You can also search for an 8mm size. Usually those are more readily available. Let me know what you find or if you need more help. Hope all is well.
@@ChasesWKshop Thanks, I really appreciate the response! Do you mean use 8mm shaft collars with a 1/4" rod? I was having trouble fitting a 3/16" collar on a 3/16" rod, so does a slightly larger size collar make it an easier fit?
@@davidtennyson-m2m you’re welcome. If you buy 1/4” rod be sure to buy 1/4” shaft collars. Same with 8mm. Its just you might find an 8mm size if it’s hard to find a 1/4”. Actually to be closer to an 1/4” you would need 6mm. 8mm is closer to 5/16 but it really doesn’t matter in size for the guides. As far as the collars not fitting you can always put the rod into a drill and use sandpaper to thin the diameter enough for the collars to fit. I’d use 400 grit until I got it to the right size then use 600 and 1000 to smooth it out. I hope this makes sense. If not let me know bud.
@@ChasesWKshop Ok, I'll try it out. Thanks for the advice!
@@davidtennyson-m2m you’re welcome. Let me know if you have anymore questions.
Parts have all come in over the last 2 days, I'm finally going to build it.
Michael Copado awesome!! Let me know if you need anything.
Looking forward to building it this weekend. Question, do you still think a 2amp fuse is necessary in the wiring up of it? Also are the fuse holders themselves generic? They are basically just a clip in a case with either two wires if it's inline or poles if it's a surface mount holder. Looking through the homedepot page I can't find any fuse holders actually specifying 2amps-The holders don't have anything else added to make them amp specific do they?
Michael Copado I’d check at an auto supply store like auto zone or somewhere. Any kind of fuse should work fine with it. Hope this helps bud. If you have anymore questions let me know. Thanks!
Chase, just found your channel, subscribed... lot of catch-up to do. I'm being lazy, I did scan a bit but have you played around with using neodymium magnets (small button type) into pickups? Second lazy question... do you have a CNC you recommend?
Awesome bud, welcome to the channel! I haven’t messed with those type magnets they are probably too strong to work with pickups but you never know. As far as a CNC I’d look at Gatton cnc. That’s who I built mine after. Dave’s a really cool guy and now you can buy a kit. It’s defiantly a diy kit but he explains everything. You can get into it a lot cheaper than a ready to go CNC machine plus you can learn how everything works and that helps a lot when something doesn’t work lol. Just remember too you’ll need a machine, cad and cam software (I use fusion 360) and software to run the machine (I use Mach 3). I spent about a year building mine. Bought stuff here and there to spread the money over a long period of time. Hope this helps let me know if you have anymore questions bud.
@@ChasesWKshop Yes, they pack outrageous mag power in small package but I've played around with some weaker varieties and they DO work and easy to experiment with... I just don't have the experience or variety of testing to offer any conclusions/theories ... hence my question. I have an electronics background so I want to systematically approach this .... hence my next project is a DIY gauss meter... can't afford the pro ones. Since pickups are so subjective, I want to head into this resisting fokelore, assumptions, and lazy conclusions (YT is packed with them). Thanks much on the CNC info... I had already posted my question when I saw that you actually built your own!! Of course you did ...... ha ha.
@@ccook31 gotcha bud. With your background in electronics you won’t have a problem making them. You may can tell me, I think the stronger the magnet the bigger the magnetic field would be so it would not pick up the string as much as a lower powered magnet with a smaller field? Just my thoughts on it. Glad you like the channel bud. Let me know if you have anymore questions. Talk to you soon.
@@ChasesWKshop Great question! ... your take makes perfect sense. For the record I don't think bigger is better for the mags, But you've hit on exactly why this is so elusive... intuitively you are correct - is there a sweet spot for the string where it's 'more visible' to the windings?. But what if it's not the intensity but the shape (or density)? Someone at Fender gave us a clue when they discovered a metal base plate under the Tele bridge added juice/focus. I don't think mag fields can be reflected, but they can certainly be contorted... I'm going to play around with soldering short sections of string to the live strings directly over the pickup. Based on this 'string visibility' theory I should see more output... yes? And if they are short enough they shouldn't effect harmonics or tone...(?)
Very cool! Gonna build this soon, do you think it would hold up after say a couple of dozen pickups?
Btw, how long would you say it takes you to wind a pickup with this?
FraJa1980 yes I think it would hold up for many pickups. Sorry somehow I missed your message. It took me around 10 minutes to wind the one in the video I did on my channel. Hope this helps. Thanks for the question.
How's the motor mounted inside? is it just sticking through a hole and glued? or is there bracket?
I built a bracket to hold it. Look in the description of the video and there is a link to free plans. All the parts are there in 1-1 size where you can print them out if you’d like to. Hope this helps bud!
Hello Chase, any chance of you making the pieces for the enclosure and selling them? I would be interested.
jswolfe94 I have thought about that and may be able to do that in the future bud. Thanks for the comment and welcome to the channel.
Thamk you... you helped me a lot!
You’re welcome! Glad I could help.
pretty cool
Gerard Di Lorenzo, Thanks man!
Hey Chase, I just made my own pickup winder using the parts/improvements you suggested and it turned out awesome. Do you have any tips for making sure the bobbin doesn't have any wiggle to it and getting it perfectly straight?
Thomas Ring great glad it worked out for you. I just use the painters tape and super glue trick to mount them. As far as getting it centered I usually just eye it and try to get it as close to center as possible. You could find the center line of the bobbin then align it with the shaft hole. Sorry if that’s not good enough. Thanks for the question bud and let me know if you need anything!!
Thank you so much for this fantastic video! in the amazon link, I noticed that the geared 1000rpm motor runs on 24 volts. Would this lead to trouble? or am I missing something haha
simon lines hey bud glad you like the channel and welcome. I guess the 12 volt was discontinued. Try this link here.
www.amazon.com/Greartisan-Electric-Reduction-Eccentric-Diameter/dp/B0745YDSJS/ref=mp_s_a_1_2?dchild=1&qid=1589228129&sr=8-2&srs=18712795011&th=1&psc=1
Thanks for all the info. Great job on your first video. 👍😎
74dart man thanks man!
@@ChasesWKshop you're welcome!☺
Hi there, you say in the video that you had to add a transistor to the speed controller - is this required for the speed controller available from Amazon that you linked to below the video? If yes can you please provide information on the transistor and any other parts you had to add and thanks. Great build!
No, if you buy a speed controller it should have everything in it. I built my own so I had to add the transistor.
Peter Busatto thanks for the question!
Execellent
i made mine out of an old fan, i just count how many turns, its not very percise but i would guess my margine of error is within 100 turns, and thats pretty close
Ever consider selling these??
Id buy one.
I haven’t. I have thought about making a set of plans that you can print off for free that can be used as a template for the wood. Let me know what you think. I hope to get some more videos out soon too. I’ve been working two jobs in the summer. If you have any ideas for videos please let me know. Thanks for the comment bud. Let me know if you have any questions.
@@ChasesWKshop You said you had a cnc machine. If you build them, they will sell. If you made yours for around $30 than you could sell them for $100 and be making profit and still be giving people a good price.. Either way, thanks for making this video. It has inspired me to wind some PAFs. So now i must build a winder and now I know how. Thanks again.
Phil Summers awesome man! Glad I helped you out. I’m thinking about getting a kit together. I’ve put one together for the b Bender parts so now I’ll work on this. Thanks for the comment and the advice bud. Welcome to the channel!!
@@ChasesWKshop I second Mr. Summers's request, be it schematics, or a fully built winder, I would be interested enough to pay (which I suppose says a lot in the era of everyone asking for stuff for free). I would love to see your b-bender project as well! I love those things, but they are so expensive! Or overly....fancy? Anyways, glad you are on here sir!
Mike Quinlivan I’d be glad to build you one. Send me an email to weatherfordwoodcrafts@gmail.com. Thanks for the comment bud!
Hey Chase!! Ive been making pickups for years now, (kinda new to the computer thing:)
Gotta say my handmade winder is SUPER similar to yours! Great video and lovely design Cuz!
My handmade winder makes better sounding pups than the storebought (StewMac) one i paid Dearly for!
Awesome man. If you have a video of it I probably watched it so I can’t take full credit for any of it. Glad you like it man!! I’m pretty new to building pickups so I may need your help sometime if you don’t mind. Welcome to the channel bud!
Anytime!
Does this counter works goood?
Could you list all the parts I don’t see on eBay the exact parts you used thanks
Hey bud, they’re in the description of the video. They’re Amazon links.
Re: Motor and power supply, noted you installed a 12V - 1000rpm motor. I've found numerous e-tailers for motors, but there are no specs (i.e. max load AMP or Watts) so it's almost impossible to match a motor with the proper 12v power source. Did you just grab any 12V power source or were you able to match the power source to the motor. Thanks, R.
R A the motor I used stated it had a .18 amp loaded current rating and a .04 amp non load current rating. I used a 1.5 amp wall wart power supply. The one I use in the wiring video was a 2 amp power supply. As long as you have enough amps to run the motor with the power supply you will be good to go. The one I linked in the description has the rating I stated. Hope this helps bud. Thanks for the comment and question.
So, running a .18 amp motor with 2 Amp power supply does not over heat the motor by the end of the PUP build session? Btw, what gauge wire are you using with the 12V supply? Thanks R.
R A no you’ll be fine. The other way around is where you’d have issues. Make sure to throw in a fuse between the power supply and the motor speed controller. 1 amp will be good. I used 18 gauge stranded.
R A a 2 amp power supply will power up to 2 amps. It doesn’t matter if it’s .01 amps or 2 amp motor. Although if it was a 2 amp motor I would go with a bigger power supply because you want head room by that I mean you don’t want the power supply running full amps all the time. With a 2 amp motor I’d go with say a 2.5 or 3 amp power supply. Now if you try to power a 5 amp motor with a 2 amp supply you’ll have issues. Hope this makes sense bud. If you have any more questions please let me know.
Does this pickup winder have any problem??? Does this works good?
It’s not the fastest winder there is but it’s great to learn on. Maxs speed is about 1000 to 1200 rpm with the counter. I’ve not had any issues with it.
@@ChasesWKshop thankyou brother ill make one for myself
Rahul Sayami good deal bud. Let me know if you need anything bud.
@@ChasesWKshop does magnetic reed switch works same as this?
Rahul Sayami a magnetic reed switch would be slower rpms. The problem with a mechanical switch is at high speeds the mechanism doesn’t have time to reset so you will get inaccurate readings at high rpms. It should state its max reading rpms. Hope this helps.
Do you by chance have a link so I can check out the motor specs?
michael collins there should be one in the description. If not let me know thanks.
Chase'sWKshop thanks. I should’ve checked there first. It looks like I bought the right one.
Good deal bud. I should have stated I put the links in the description. The one I posted you have to pick the speed and voltage you want. As long as it’s 12v 1000 rpm it’s like mine. Need anything let me know.
Would you be willing to build me one of these? Name the price with all the improvements you mentioned, I would be a customer. It is awesome to see people like yourself do things like this
Keith Revst, I would love to but right now my time is pretty limited. I might be willing to during the winter if you can wait that long. Thanks for the comment man and hope I can help you in the future!
Just let me know. Thank you for replying.
Keith Revst, yes sir. Thanks for the comment.
you should make more and sell online? i want one
Aevo Guitars I’ve been working on doing that but I’m trying to make it affordable and it still be worth my time if you know what I mean lol. I’ve thought about a kit that you can build too. If you’re wanting one send me an email to weatherfordwoodcrafts@gmail.com and I’ll keep you informed once I figure it all out. Thanks for the comment bud and glad you like it.
Best damn video on pickup winders ever made! Thanks Chase! I have never even touched a soldering iron before, but I am going to try to build this project! I went and added all the items you suggested to my cart on Amazon, and I had to go to Home Depot for the rod and shaft collars. I just have one quick question, if you have a few minutes... will this power supply on Amazon work for this motor and speed controller? www.amazon.com/gp/product/B01AZLA9XQ/ref=ox_sc_act_title_1?smid=A8IA87KY629&psc=1
It is a 12V DC 2A wall wart, but it only is rated for 24 Watts, whereas the speed controller says 30 Watts. I imagine too little is better than too many watts, but I wanted to ask before I bought something that will not work. You mentioned in a previous comment reply that you are thinking about publishing the schematic or plans for your design. I sure would appreciate that, and would be happy to pay you for it. I am pretty sure that I can figure out how to wire the female power supply "in" to the speed controller, and then wire the speed controller to the switch, and then the switch to the motor... but... like I said, I am as new to electronics as it gets, so, any specifics would be helpful as all get-out.
Michael Perkins yes it will work fine. The speed controller is probably rated for 30 watts so you should be fine bud. Glad I could help you.
Michael Perkins yes I will try to get the design to where you can download it. I have an idea of how I can do it but not sure if it will work or not. I’ll let ya know bud.
Hey buddy I have a set of PDF plans made if you still would like to take a look at them. Send me your Email and ill get them to you. Thanks
Hey @Chase'sWKshop, I sent you an email to the email address that in your "About" section on this channel. Hope you get it, and I hope you have a good weekend.
Hey man what part of the South are you from?
North Alabama. I’m told my accent gives it away lol.
... and your Muscle Shoals hat ("Muscle Shoals has got the Swampers..." ~ Lynyrd Skynyrd)
Great video btw.
Haha yes! I ask out of town people all the time if they know about the swampers from the song and they look at me funny lol. So congrats to you on your skynyrd knowledge!!
@@ChasesWKshop I noticed it immediately from Skynyrd and other great bands that recorded there...
Is the wiring video for this no longer allowed?
Paul Comstock it’s here bud
How to Wire the Pickup Winder ua-cam.com/video/QNZd4yzcVYM/v-deo.html
@@ChasesWKshop Thanks Chase! The link may be broken on your web page?
@@pcomstoc Thanks so much bud! Ill get it fixed soon. You did get the video though right? Thanks again!!
@@pcomstoc I think I have it fixed now. Let me know if there are anymore problems. Thanks again for letting me know about it. I really appreciate it.
I never could understand why these winders are so damn expensive- they are simple machines
I kinda wanted to see it in action. Otherwise a great video.
Bill Karoly, I use it in my how to build a pickup series on my channel. Thanks for the comment.
ua-cam.com/video/9t858PTIYjo/v-deo.html
Hi Chase, great vids on this channel. Subscribed! Thanks for the detailed explanation and walkthrough. You may have seen this but I'll put it here anyway. When researching this one I was trying to dream up a motor mount when I found this on Ebay: 37mm DC Geared Motor Mounting Bracket Holder + 6mm Hex Coupling: www.amazon.co.uk/Geared-Mounting-Bracket-Holder-Coupling/dp/B00TK0X03U I hope you don't mind the link. There's six threaded holes in the front of that (37mm size?) motor gearbox you have there at about 2:48, this right angle bracket might give more mount options and maybe allow the motor to be mounted on a swivel arm or outside the wooden box to achieve different pitch . The bracket (on Ebay) also comes with a brass Hex nut and a threaded hole for a grub screw to grip the motor's driveshaft and connect stuff to it. Cheers!
Drum Crazy that’s awesome man. Thank you for sharing. I’m working on the Pickup Winder 2.0 and I’m needing a way to mount the motor inside the box. I may use this bracket. Appreciate the info and the comment bud. Welcome to the channel!
@@ChasesWKshop No worries! Looking forward to your new build!👍
Ok, follow up. I built one of these, wound about 12 pickups with it and found the run-out on these RC motors to be highly variable. No matter what I did the commutator shaft just had too much end play in it to keep the bobbin spinning true. So I bought a cheap mini lathe from eBay AU$50 and used the box, speed controller, counter & footswitch I already had, hooked in the lathe motor at 12vdc. The motor has a drill chuck and spins very true now. It also gave me more options to quickly change bobbins for humbucker or single coils. Lathe motor here, good luck! : www.ebay.com/itm/DIY-Mini-Lathe-Mini-Fundamental-Wood-Lathe-Polisher-Table-Fixed-Links-Durable/192857666080?hash=item2ce7367220:g:JGAAAOSw~~NciolR
Awesome man. Thanks for the input bud. I’m thinking the only way to get rid of it would be to use a shaft and pulleys like in the Pickup Winder I just got through doing. You may be able to speed up the motor that way too. Just don’t know if the motor has enough power to do all of that. Thanks again for the follow up bud. Send me some pics of what you did and I’ll share them.
@@drumcrazy5866 I don't understand the problem? What do you mean the commutator shaft had too much play? What problems did it cause?
Safety first throw a fuse in there just in case
TheStudentoflove you know, you’re exactly right!! Will do. Thanks!!