Re doing free repairs, i have been in this situation and it always the case that expensive parts are required, what i do is only charge for the parts if the customer can afford them. Going back many years when you visted customers homes to do the repair you could tell the genuine cases of hardship, and i have often done low cost repairs to try and help them make ends meet.
I normally use the code search function. you switch tv on and go through code search until it turns off. you might need to Google the remote instructions on button procedure. It's normally set/search code and press power then channel up until tv switches off. however they are all different those remotes.
I really enjoy your channel as I have repaired TV’s since high school I “repaired” a Samsung two days ago using your video as a guide, the set had the dreaded 2 blink code and I put a piece of paper under the ribbon cable and restored the pix and it worked Very well, saved another set from the bin and the owner was thrilled Thanks to you I was able to know where the paper went.
Allen I noticed there’s loads in the code book starting with 1’s and 0’s, what’s the model number ? Do you have a mobile phone with an infrared led function as there is an app where you can use your phone as a remote it’s called (i r blaster)
Try this Allen . Manually turn on your TV, put the remote into auto scan or learn mode keep it pointed at the TV until the TV switch is off and then press the ok key straight away for the remote to learn that in. That universal remotes are always a challenge I have three of them here cost $12 Australian
Re doing free repairs, i have been in this situation and it always the case that expensive
parts are required, what i do is only charge for the parts if the customer can afford them.
Going back many years when you visted customers homes to do the repair you could tell
the genuine cases of hardship, and i have often done low cost repairs to try and help them
make ends meet.
Couldn't you have used a sky remote for it. You can get them to work on most TVs .. Baird was the brand name used by Radio Rentals ..
I normally use the code search function. you switch tv on and go through code search until it turns off. you might need to Google the remote instructions on button procedure. It's normally set/search code and press power then channel up until tv switches off. however they are all different those remotes.
I have a few of the one for all ones
I really enjoy your channel as I have repaired TV’s since high school I “repaired” a Samsung two days ago using your video as a guide, the set had the dreaded 2 blink code and I put a piece of paper under the ribbon cable and restored the pix and it worked
Very well, saved another set from the bin and the owner was thrilled Thanks to you I was able to know where the paper went.
Happy to pass on the knowledge. Thank you for your support
Allen I noticed there’s loads in the code book starting with 1’s and 0’s, what’s the model number ? Do you have a mobile phone with an infrared led function as there is an app where you can use your phone as a remote it’s called (i r blaster)
Try this Allen . Manually turn on your TV, put the remote into auto scan or learn mode keep it pointed at the TV until the TV switch is off and then press the ok key straight away for the remote to learn that in. That universal remotes are always a challenge I have three of them here cost $12 Australian
I shall try that later thanks Mike.
try 200 then 201 and so on it may take half an hour but im sure 1 of the 200s will turn it on. good luck.
Thought I'd gone mad. First 5 minutes is repeated.
Of course, I might still have gone mad, too.
Do you ever get to the point?????
You could have shortened this video to 5 minutes, you dragged it out.
It’s called communicating. It’s what I do. I could also have made it an hour.