Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
超神 真的超級神 送去給人維修報價要3000台幣 結果照影片搞5分鐘就修好了直接現省3000 （唯一要注意就是螺絲起子選好一點 避免搞壞螺絲） 除了要稱讚影片本身簡單好懂外 也要嘴一下台灣商人真的壞的很
thankyou so much! i have encountered the same problem twice. now i can fix it myself thanks to you
謝謝你的分享，馬上解決了問題！感謝．
感謝分享!照著做一下就解決了
Thank you and God bless!
Thanks to you, I fixed my camera. Thank you so much.
No problem. :)
Wowwww this is so useful. My camera have this problem I’ll try fix it by follow your method
遇到一樣的問題 太感謝了!
我部FE2也是一樣 快門鎖了。Thx Charlie, you save me HKD450 from reparing shutter curtain
太感谢了！！救好了我的fm2
不客气😊
我也遇到过，自己拆开也是这样搞好的 ，没有看教程，
I have the same problem, but the screws are so tight that I couldn’t remove all of them. Any suggestions please?
Hi i seem to have the same problem and had to do what you’ve done several times on a film roll. Does opening the bottom expose the film roll or single film?
Opening the bottom cover will not affect the film.I've also had the same problem repeated on the same roll of film shot, maybe the camera is old：P
👍 ah that’s good to hear! Yep, camera is old, I’m going to try and lubricate some of the screws in the mechanism.
@@jsaxx999Sounds good!
Thank you very much this clip. ^^♡
Welcome :P
I keep facing this problem when i no use this camera some time, i have to use this solution again and again, any solution?
Old camera, maybe you can try again :)
❤excelente! 👍🏻Same problem coz not use my camera over ten years by the launch of iPhone
You are welcome~ We live in a fast-paced modern world, but inside we still want to slow down.
Thank you for you sharing and save my money. But I dont know why it stucked.
Welcome! I've been told to add some lube, I haven't tried that yet.
What size jis screwdriver did you use? 🪛
My calculation may not be too accurate, 1.5mm Phillips screwdriver ：）
Jis Japanese screwdriver
Jis 0 or 00 Japanese screwdriver
有用!
好的👌
My fm2 takes a long time in a second, how do I fix it? Do you have to lubricate?
Sorry Willy, I am not sure how to solve this problem. Maybe the fault I encountered is relatively simple and can be fixed.
鈦金屬簾贊一下
good
超神 真的超級神 送去給人維修報價要3000台幣 結果照影片搞5分鐘就修好了直接現省3000 （唯一要注意就是螺絲起子選好一點 避免搞壞螺絲） 除了要稱讚影片本身簡單好懂外 也要嘴一下台灣商人真的壞的很
thankyou so much! i have encountered the same problem twice. now i can fix it myself thanks to you
謝謝你的分享，馬上解決了問題！感謝．
感謝分享!照著做一下就解決了
Thank you and God bless!
Thanks to you, I fixed my camera. Thank you so much.
No problem. :)
Wowwww this is so useful. My camera have this problem
I’ll try fix it by follow your method
遇到一樣的問題 太感謝了!
我部FE2也是一樣 快門鎖了。Thx Charlie, you save me HKD450 from reparing shutter curtain
太感谢了！！救好了我的fm2
不客气😊
我也遇到过，自己拆开也是这样搞好的 ，没有看教程，
I have the same problem, but the screws are so tight that I couldn’t remove all of them. Any suggestions please?
Hi i seem to have the same problem and had to do what you’ve done several times on a film roll. Does opening the bottom expose the film roll or single film?
Opening the bottom cover will not affect the film.
I've also had the same problem repeated on the same roll of film shot, maybe the camera is old：P
👍 ah that’s good to hear! Yep, camera is old, I’m going to try and lubricate some of the screws in the mechanism.
@@jsaxx999Sounds good!
Thank you very much this clip. ^^♡
Welcome :P
I keep facing this problem when i no use this camera some time, i have to use this solution again and again, any solution?
Old camera, maybe you can try again :)
❤excelente! 👍🏻
Same problem coz not use my camera over ten years by the launch of iPhone
You are welcome~ We live in a fast-paced modern world, but inside we still want to slow down.
Thank you for you sharing and save my money. But I dont know why it stucked.
Welcome! I've been told to add some lube, I haven't tried that yet.
What size jis screwdriver did you use? 🪛
My calculation may not be too accurate, 1.5mm Phillips screwdriver ：）
Jis Japanese screwdriver
Jis 0 or 00 Japanese screwdriver
有用!
好的👌
My fm2 takes a long time in a second, how do I fix it? Do you have to lubricate?
Sorry Willy, I am not sure how to solve this problem. Maybe the fault I encountered is relatively simple and can be fixed.
鈦金屬簾
贊一下
good