the home button. man in a house. Thats the part guard as programmed upon installation in accordance with customers needs. usually turns off upstairs PIR or All PIR’s if the perimeter windows and doors have sensors
Hi Jay, I am trying to lower the noise of the panel when it arms and disarms. Can you advise? I tried the squawk alterations but it makes no difference
Hi, after forgetting my code to the system, I caused the alarm to go off. After eventually remembering my code, I then out of panic pressed the middle button in between the lock and unlock button to see why my system flashed memory and started pressing anything (which meant everything that had living room, kitchen etc I pressed okay to bypass) I soon later rechecked what bypass meant and it appears that I have turned everything off. Do you know how to turn off bypass so the alarm is working again in the chosen rooms?
Tsimbad next time you arm the alarm it has the bypass. Then you have to reselect bypass if you want for the next time or it will just arm whichever serting you select
fabuccifootwear press the info/ok button repeatedly but slowly and read what it says each time before okaying it. It will tell you step by step whats happened and the system troubles, which must be rectified in order for the system to be ‘ready’.
@@TheCiscojay what is installer menu? Do you mean installer guide? I have installer guide and it said for retrieving factory default I need to enter the installer code.
Hi can you part set your alarm via the key fob? Or does this have to be done via the main key pad. Thanks
Yes you can!
the home button. man in a house. Thats the part guard as programmed upon installation in accordance with customers needs. usually turns off upstairs PIR or All PIR’s if the perimeter windows and doors have sensors
Hi Jay,
I am trying to lower the noise of the panel when it arms and disarms. Can you advise? I tried the squawk alterations but it makes no difference
Try turning off piezo beeps. Its in the installer menu, define panel, number 8or 9 I think.
Hi Jay how do you set the silent alarm please
its a setting in the installer section. you need that code if it’s been changed from factory code 9999
Hi, after forgetting my code to the system, I caused the alarm to go off. After eventually remembering my code, I then out of panic pressed the middle button in between the lock and unlock button to see why my system flashed memory and started pressing anything (which meant everything that had living room, kitchen etc I pressed okay to bypass) I soon later rechecked what bypass meant and it appears that I have turned everything off. Do you know how to turn off bypass so the alarm is working again in the chosen rooms?
Tsimbad next time you arm the alarm it has the bypass. Then you have to reselect bypass if you want for the next time or it will just arm whichever serting you select
is smoke sensor not part of the power aster 10?
Only if its a visonic smoke sensor.
Thanks and how long is the battery life? More so what’s the number of zones?
My system is saying not ready and then memory flashing.How do I reset the alarm to normal please?
fabuccifootwear press the info/ok button repeatedly but slowly and read what it says each time before okaying it. It will tell you step by step whats happened and the system troubles, which must be rectified in order for the system to be ‘ready’.
Hello i loose my installer code. Do you now how to reset it.
Tes Niko you need to download installer menu and follow instructions
@@TheCiscojay what is installer menu? Do you mean installer guide? I have installer guide and it said for retrieving factory default I need to enter the installer code.
Tes Niko yes and you font have the installer code do you? So do what I daid and you will and then....
Hi mate, when you arm home does the alarm turn off the up stair pir automatically or do you need to set this up? Thanks