Cara Bongkar & Ganti Karet Meleleh (feed exit roller) Scansnap S1500 MELTED RUBBER
Вставка
- Опубліковано 1 жов 2024
- HOW TO REPLACE FEED ROLLER SCANNER FUJITSU SCANSNAP S1500 (MELTED RUBBER)
CV.Cipta Citra Codena
Inventor & Prinsipal DMR
Jl. Batik Ayu No. 26, Sukaluyu, Bandung - 40123
Hub/sms: (Tiar) 081809534376 - WA: 081323605876, 082219258846
atau 081573327777
#PaperPickupRoller
#TireForFujitsu
#REPLACEFEEDROLLER
#scansnaps1500
#karetS1500
#Meleleh
#tutorialscansnap
I’m watching from Japan. Thank you for the easy-to-understand repair video! It was very helpful 😁
Thank you so much.
The easy-to-understand video was very helpful.
It has been restored safely.
Thank you for your movie. From Japan.
@@Junkecom My Pleasure
Thank you, simple.
Just a suggestion, but if you upload a reverse video of the disassembly, it might make the reassembly process clearer. Most people who watch this video will only disassemble once or twice, so with only a disassembly video, they might end up with extra screws during reassembly (laughs).
Thanks for the suggestion, I will make a full video of the disassembly and assembly later.👍🤝
Excellent! Thank you so much! I had some gummy rollers in one of our scanners at work. This was incredibly helpful.
Thank you so much for taking the time to make this video. Thanks to you I was able to disassemble the scanner.
In case it's useful for anyone else, I used silicone tubing, 6mm inner diameter, 12mm outer diameter, cut to length of original rollers. It seems to work well as a substitute.
consegue me arrumar, o draver da s1500??
my friend you can download it here: www.myhpdrivers.com/2023/01/fujitsu-scansnap-s1500-driver.html
There was no way I would ever figure this out without this detailed video. Thank you so much for taking the time to make this.
Thank you for this video. I changed both rollers on my old S1500 and it worked perfectly. The whole job from start to finish is around two hours.
2.7k views in 1 year. So, I'm not the only one with melted rollers! :) Thanks for posting.
It was very useful for replacing the feed roller. I can't understand anything other than Japanese, so I didn't understand the content of the explanation at all, but the video alone was very helpful. Thank you very much.
I hope this simple video tutorial helps
Klo keluarnya 1 ngga bisa banyak itu apa yg di ganti?
Coba dicek brake dan pick rollernya lalu bersihkan
Untuk ganti roller S1500 biayanya berapa ?
Untuk biaya service dan penggantian karet 1jt pak
Ini WA saya pak 082219258846
Suaranya bisik2
Mohon maaf sebelumnya. Setelah buat videonya selesai baru tau suaranya kurang jelas
Terima jasa ganti karet bang ? Ongkosnya brp ?
Ini no WA sya 082219258846
Abang dimana?
@@campurcampurtea Jakarta utara bang, kalau abang dmn ?
@@cocplayer5999 saya di bandung bang
pak mau tanya, punya saya error 0x0004004 itu artinya apa ya?
apakah adaptornya sudah sesuai bawaannya pak?
@@campurcampurtea sudah pak, sebelumnya gak kenapa-kenapa. hardware failure katanya. sempat saya beli online juga adapter yg sesuai voltase dan ampernya. masih sama.