Sir, I am designing a horizontally concrete curved section and I wrap the end of cfrp NSM plates using cfrp sheets of 100mm width. I obtain an error of "volume of x elements is zero, small or negative.Check coordinates or node numbering or modify mesh seed" I tried to partition the cfrp sheets and verify the mesh. But I again I got the same error. What can I do to solve this error
Hi. you must do these modifications in the mesh module: 1) changing the seeding and using smaller elements in the regions with more curvature. 2) changing the meshing technique. for example if it is structure, it must be changed to sweep and test this technique. 3) changing the partitioning. sometimes partitions lead to low quality elements and they must be changed. finally if you couldn't resolve it yourself, you can use our online tutoring and consultancy service to resolve the issues.
in some FE simulations, the mesh pattern has a direct effect on the simulation results. in this tutorial, I have mentioned two examples about the importance of mesh pattern. in the reverse extrusion simulation, if we use a simple pattern of mesh, we will receive error because the ALE technique cannot generate high quality elements at the middle of the simulation. so we must use that special mesh pattern.
@@vincenttong7698 As the geometry is axisymmetric, there is no need to do the modelling in the 3D space unless there are some issues which disturb the symmetry. I can create a comprehensive tutorial for you which includes the procedure of creating this mesh in a step by step manner from beginning to end in the axisymmetric space. Creating such tutorials is one of our paid services. If you wan the mentioned video, please contact me via email : mirzabozorg71@gmail.com
the volume of 8 elements is zero, small, or negative. Check coordinates or node numbering, or modify the mesh seed. In the case of a tetrahedron this error may indicate that all nodes are located very nearly in a plane. The elements have been identified in element set ErrElemVolSmallNegZero. how can i deal with this
Hi. This error indicates there are several elements which have un acceptable quality in your model. To resolve this error, you must mesh the model in a way which the quality of mentioned elements increase to avoid this error. First, you must find these elements. You can find them from the display group tool in the visualization module. Second, you must change the seeding size or change the partitioning strategy. Finally, you must rerun the model to check whether the error is resolved or not. If you didn't resolve the error, you can contact me to use our consultancy service to resolve this error.
Hi. Your model must be checked to find the mistakes in the model settings. To do this you can use our online tutoring and consultancy service. You can send an email to me to use this service. my email: mirzabozorg71@gmail.com
hi. thank you so much for your comment. you can ask your questions about each of the videos in the comments and we will answer your questions. you can ask your questions about the details that you think must be mentioned in the videos.
Very applicable video since this is a common error in Abaqus! Thank you do much
Hi.
You are welcome.
Thank you very much! You also briefly reviewed necessary steps for the modeling of an extrusion process 🤞
you are welcome.
yes of course.
Sir, I am designing a horizontally concrete curved section and I wrap the end of cfrp NSM plates using cfrp sheets of 100mm width. I obtain an error of "volume of x elements is zero, small or negative.Check coordinates or node numbering or modify mesh seed" I tried to partition the cfrp sheets and verify the mesh. But I again I got the same error. What can I do to solve this error
Hi.
you must do these modifications in the mesh module:
1) changing the seeding and using smaller elements in the regions with more curvature.
2) changing the meshing technique. for example if it is structure, it must be changed to sweep and test this technique.
3) changing the partitioning. sometimes partitions lead to low quality elements and they must be changed.
finally if you couldn't resolve it yourself, you can use our online tutoring and consultancy service to resolve the issues.
@@FemexIran thank you
@@jeyasuthalingaretnam1477 you are welcome.
One question, what do you mean by "special mesh patterns" for specific processes?
in some FE simulations, the mesh pattern has a direct effect on the simulation results. in this tutorial, I have mentioned two examples about the importance of mesh pattern. in the reverse extrusion simulation, if we use a simple pattern of mesh, we will receive error because the ALE technique cannot generate high quality elements at the middle of the simulation. so we must use that special mesh pattern.
Hi, could you please teach me how to mesh like this? I tried many times but failed.
Hi.
Are you talking about the mesh of the reverse extrusion problem ??
I mean that special kind of mesh which prevent excessive distortion.
@@FemexIran Yes, I tried this kind of process via 3D simulation, But there is always a distortion problem.
@@vincenttong7698 As the geometry is axisymmetric, there is no need to do the modelling in the 3D space unless there are some issues which disturb the symmetry.
I can create a comprehensive tutorial for you which includes the procedure of creating this mesh in a step by step manner from beginning to end in the axisymmetric space. Creating such tutorials is one of our paid services.
If you wan the mentioned video, please contact me via email : mirzabozorg71@gmail.com
@@FemexIran Thanks for your effort. But I really need 3d model because the structure is not axisymmetric.
@@FemexIran I can do 2D too. But 3D is too difficult.
Thank you very much
Hi.
You are welcome.
why Abaqus make submit and not run
could you help me about this
Hi.
Do you face any errors ?
@@FemexIran yes, there are errors in mesh
@@olaalhousain5954 What are the errors ?
Explain about them in more details.
the volume of 8 elements is zero, small, or negative. Check coordinates or node numbering, or modify the mesh seed. In the case of a tetrahedron this error may indicate that all nodes are located very nearly in a plane. The elements have been identified in element set ErrElemVolSmallNegZero.
how can i deal with this
Hi.
This error indicates there are several elements which have un acceptable quality in your model.
To resolve this error, you must mesh the model in a way which the quality of mentioned elements increase to avoid this error.
First, you must find these elements. You can find them from the display group tool in the visualization module.
Second, you must change the seeding size or change the partitioning strategy.
Finally, you must rerun the model to check whether the error is resolved or not.
If you didn't resolve the error, you can contact me to use our consultancy service to resolve this error.
@@FemexIran
thanks for replying , I'll try this
@@olaalhousain5954 You are welcome.
hello sir I am getting error as excessive incremental elements rotation
what should I do
Hi.
Your model must be checked to find the mistakes in the model settings.
To do this you can use our online tutoring and consultancy service.
You can send an email to me to use this service.
my email: mirzabozorg71@gmail.com
All your video are carbige be cause without any details
hi.
thank you so much for your comment.
you can ask your questions about each of the videos in the comments and we will answer your questions.
you can ask your questions about the details that you think must be mentioned in the videos.