Hey idk if this was on stock plastic diffs or if maybe you swapped it out for something else idk if metal diffs were available when you made this vid but interested in your opinion is it worth trying this moter with stock diffs? Thanks & great vid
I have been searching around for sway bars for the Senton 3S and nobody makes them. Have you tried making DIY sway bars for it? Do you think it is even possible?
I haven't tried making sway bars. It would be fairly difficult there isn't anywhere to attach it to on the a-arm. I'm sure something could be rigged up but would it even make a difference? I don't know.
Hello. My arrma senton hangs up every time I walk for 10 seconds at full speed, I haven't made any modification, the car has all the original parts! What's happening? Can you help me?
@@soulrebelrc6341 The arrma senton shutdown is only working again when I press the on and off button. I believe it is overheating, I have an additional cooler, how do I install?
@@fillype91 If it's overheating it won't turn rite back on. It's probably the low voltage cutoff turning the ESC off when your holding the throttle wide open due to a battery issue. I've had this happen to me when I had one cell going bad on a 3s battery. The weak cell can't keep up under load the voltage drops and the ESC kicks off. Either get a new battery or change the low voltage cutoff to a higher voltage. I don't recommend changing the low voltage cutoff.
@@soulrebelrc6341 Before the arrma senton shutdown he became weak with low speed. My battery is new, but it wasn't with all the cells equally balanced.
@@fillype91 if u can get it to shut down again the same way it did before, look at the ESC and count the flashes from the blinking red light and that should tell you why the ESC shut down.
Hey Nick,
Hope all is good Bro. Re-watching your Senton vids as I fix RCs during the winter. See you soon!
Awesome bit of kit, I may have to start beefing up my Granite BLX soon.
Great video brother 👊
Thanks bro, its definitely a stout little rig now.
Hey guys, thanks for watching here is the link for the new rc madlabz high performance kit - www.ebay.com/itm/165285737739
I'm new to this but I picked up a senton mega for $50 from an old man..I've already put a 3s system in it.. I just ordered 57t spur
Nice bro, if u haven't herd Jenny's rc has tons of new parts for used prices. Perfect for the build your doing.
Hey idk if this was on stock plastic diffs or if maybe you swapped it out for something else idk if metal diffs were available when you made this vid but interested in your opinion is it worth trying this moter with stock diffs? Thanks & great vid
Definitely get the metal diff gear and metal input gear/shaft. I have both installed. The plastic gears don't hold up.
Great videos. Where did you get the metal spline block (the part that slides in to secure the motor and also has the battery tie)?
You can get the motor plate and chassis block directly from M2C Racing.
are those typhon 6s shocks? what type of springs are you using?
My 17t 32p gear engine got destroyed after I put the 57t metal gear. Which one should I put so that doesn't happen?
I have been searching around for sway bars for the Senton 3S and nobody makes them. Have you tried making DIY sway bars for it? Do you think it is even possible?
I haven't tried making sway bars. It would be fairly difficult there isn't anywhere to attach it to on the a-arm. I'm sure something could be rigged up but would it even make a difference? I don't know.
I followed almost all your upgrades to run with 4s, have any metal upgrades that you advise to have to reserve?
All of them.. lol
What pinion do u have in ther
Hello. My arrma senton hangs up every time I walk for 10 seconds at full speed, I haven't made any modification, the car has all the original parts! What's happening? Can you help me?
I'm not sure what you mean by hangs up... Does it flip over? Or shut down?
@@soulrebelrc6341 The arrma senton shutdown is only working again when I press the on and off button. I believe it is overheating, I have an additional cooler, how do I install?
@@fillype91 If it's overheating it won't turn rite back on. It's probably the low voltage cutoff turning the ESC off when your holding the throttle wide open due to a battery issue. I've had this happen to me when I had one cell going bad on a 3s battery. The weak cell can't keep up under load the voltage drops and the ESC kicks off. Either get a new battery or change the low voltage cutoff to a higher voltage. I don't recommend changing the low voltage cutoff.
@@soulrebelrc6341 Before the arrma senton shutdown he became weak with low speed. My battery is new, but it wasn't with all the cells equally balanced.
@@fillype91 if u can get it to shut down again the same way it did before, look at the ESC and count the flashes from the blinking red light and that should tell you why the ESC shut down.
Beautiful 👍😀 my senton dont look like that😀👍💪💪💪
Thanks, it's def a beast!
Whats the weight of this?
It's a half pound or so may a little lighter.
About 12 ounces