Cura Infill Settings Demystified: Everything You Need to Know for Great Prints
Вставка
- Опубліковано 30 лип 2024
- Download The FDM 3D Printing Glossary Here:
pages.itsmeadmade.com/fdm-glo...
In this video, I'll guide you through every setting in Ultimaker Cura's infill settings, so you can understand how to optimize your 3D prints' strength, weight, and print time. Infill is the internal structure of a 3D print, and it plays a critical role in determining its strength and durability.
First, I'll show you how to choose the infill pattern, such as grid, lines, or triangles, and how to adjust the infill density, which controls the percentage of the interior that is filled.
Next, I'll explain the advanced settings, including infill layer thickness, which lets you adjust the thickness of the infill layers independently of the outer walls, and infill orientation, which can affect the print's strength in different directions.
Finally, I'll share some tips on how to choose the right infill settings for your specific 3D print, depending on its shape, size, and function. By the end of this video, you'll be able to confidently tweak Ultimaker Cura's infill settings to achieve the best possible results for your 3D prints.
JOIN THE FREE UA-cam COMMUNITY DISCORD HERE:
🔴 / discord
JOIN THE PATREON HERE:
🔴 / itsmeadmade
00:00 - Intro
01:48 - What is Infill?
02:25 - Infill Density Setting
03:42 - Line Infill Distance Setting
03:54 - Cura Infill Setting Panel
06:16 -Deciding on Infill Density
07:02 - Deciding on Infill Line Distance
08:18 - Infill Pattern Categories
11:11 - The Best Infill Pattern?
11:50 - Infill Pattern Settings in Cura
12:50 - Printed Infill Pattern Examples
16:37 - Pros & Cons of Lightning Infill
19:26 - Infill Patterns Data Breakdown
21:19 - THANK YOU!
22:06 - Connecting Infill Line Setting
23:18 - Infill Line Direction Setting
25:50 - Infill Offset Setting
26:28 - Randomize Infill Start Setting
28:39 - Infill Line Multiplier Setting
29:43 - Connect Infill Polygons Setting
31:10 - Extra Infill Wall Count Setting
33:38 - Infill Overlap Percentage Setting
35:12 - Alternate Extra Wall Setting
36:20 -Infill Wipe Distance Setting
37:35 - Infill Layer Thickness Setting
39:38 - Gradual Infill Steps Setting
42:26 - Infill Before Walls Setting
43:47 - Minimum Infill Area Setting
47:10 - Infill Supports Setting
49:38 - Edge Thickness Support Setting
50:21 - Final Thoughts
51:15 - Chris' Extras! - Розваги
![Lp. Последняя Реальность #107 РОДНОЙ ДОМ [Финал] • Майнкрафт](http://i.ytimg.com/vi/IK3QKzKUlHM/mqdefault.jpg)
Dude i impulsively bought a 3d printer and all your videos have been a lifesaver
HA HA! Welcome to the hobby! i'm glad i could help you out. Best of luck
@@ItsMeaDMaDe 2 months later and i am looking at 30kg of tpu pla petg and abs on a custom made damping table.
This hobby really took me by the balls
Great tips that'll doubtless save hours of printing time and tons of wasted filament. Thanks so much, Chris!
That’s my goal saving you filament and time. 😁
This is a "must watch" video for newbies. They have so many problems with infill in the beginning of their 3D printing journey and you quickly and concisely give the info they need.
For me, the INFILL LINE MULPTIPLIER info is exactly what I was looking for. Thank you so much. (thumbs up!)
Have been looking around for decent and clear instructional procedures on using cura and starting up 3d printing for 1st time, and well so far you have nailed it so you have picked up another sub. Congrats to an excellent tutorial series
Wow thanks. I’m glad I could meet expectations! I’m glad your liking the series. Im still in the middle of it. There are still 4 or 5 more videos coming out over the next few weeks.
Was wondering why the views were so low on this tip video, it's relatively new. Good content.
Thanks so much. Hopefully it will reach more people 😅. If not it at least helped the few that have seen it.
@@ItsMeaDMaDe I only started printing a few months ago, and painting just a couple of weeks ago, so it's always helpful to see these kinds of videos in case there's additional tricks squirreled away in them. While printing is a time-consuming and aggravating pasttime, when it produces results, they're usually great. I look forward to maybe doing some minis of my own in the future.
@@badatgames4127 Ha I can't agree more about the time-consuming and aggravating pasttime. If you just started painting I have quite a few tutorials but in my playlists i have a beginner series on painting 3D prints that might help you!
@@ItsMeaDMaDe That one's next on my watch list, for sure. Thanks for the content, have a sub.
@@badatgames4127 awesome! I also have a free discord group for my UA-cam community if you ever have questions feel free to join and we can help you out! Best of luck printing and painting!
great info. thank you. and thanks for moving along quickly. there is a lot of info here.
Great!! 👏👏👏 You are truly an expert in Cura 😁😁😁😁😁
Thanks! 😃
Thanks Chris!!!! Awesome Info!!!! Much Appreciated!!!!👍💯😎
Any time! Hope it helped!
Love the information but I feel I'm way too old to remember all this (will have to watch all of your informative videos over and over to get it to sink in. I'll probably be dead before that!! LOL! I send all the people I meet that's just gtting started in 3D printing to your channel because of the excellent information and how you present it. Thank you.
Wow. Thank you so much for the comment. I’m truly happy to hear I’m able to help you and break it down for you. I appreciate the referrals as well. 😁
Thnk you mate, very helpful..🍻
Thank you sooooo much
This is a great tutorial series and has helped me overcome problems with my extruder. I've done the extruder calibration, temperature tree, flow calibration, bed leveling, and a few cube tests. I'm wondering since the results of these tests were incorporated into the slice on subsequent test, is there a particular order they should have been run? I expect the test results from ealier effect those of later tests, but should I go back and rerun them (in a particular order) to fine tune the results? I have to believe that had I run the flow test before the temperature test I would have had different results.
Woot! Fantastic content as always!. (That earthworm Jim Model is pretty cool) 😂
Ha ha. Yeah it is. Thanks!
Damn good video
Thanks
👍👍👍
Good job Chris, thank you for your great work. I am using 5.3.1 and in the infill I cannot find connect infill lines, what am I missing?
Great video with fantastic tips.
However the problem i have is my nozzle always grinds/scrapes on the infill when going over 30%.
The z offset is perfect and the nozzle does not scrape on the walls or top and bottom layers only on the infill.
Please could you help with this?
I have enabled z hop, stripped assembled printer, reset slicer, checked extrusion and it still drags on the infill.
There is a short video on my channel of the scraping in action
Thanks for this most impartant information. Could you let me know if a model using honeycomb structure, is infill density matters and consider in percentence ?
CHEP showed me a while ago to lower it, but add infill multiplier to strengthen and also save time
Yo bro can you update the connect infill polygons part of the video at about 29:43 i think cura removed that setting i cannot find it. Or if i am wrong can you lead me in the direction to finding it?
for infill line distance, does cura calculate distance from the center of the line or from the edge? If i have an infill line 0.5mm thick and i set distance to 2mm then will the distance be calculated from the center of the line or from the edge of the line?
Is it possible to have different infill settings for different parts of a print? I have a week point id like to strengthen. Thanks
Super good video. Lots of info I didn't know.
One question, Isn't infill area just dealing with XY, hence the mm^2? I think it would mm^3 if it was considering Z, and would be volume.
yea i think he forgot that squared (^2) is different than cubed (^3)
Let's go!!!! 💯🤘🤙👍
😁
how can you change the infill angle from 45 or 90 to 10 degree (for the lines pattern)?
Hey bud, do you do a 2 colour print instruction for cure / creality>
I have a rather flat model with areas I want solid. I've tried several infill settings and none of them cap off the final layers. Lightning was the worst. Suggestions?
I enjoy these. Thank you for making it so simple. Do you do Blender or 3D Builder?
Glad your liking them. It’s taken a lot of testing to break it down to make it easy to understand. Ive messed with blender but I’m not great at it. Never touched 3D builder.
im trying to set the infill offset for x and y axis, but it doesnt show up, even when selected from the setting list naither print setting or model setting. 😢
My infill is gone and replaced with a inner orange shell, how can I change it back?
do you cut the video every time you slice or is it just that fast haha cause i want mine to slice like that haha
I have a problem with my anycubic kobra max not printing over infills on the top and not smooth print on the bottom of the area where the tree support connects. I know this is wordy but I've been trying to figure this out
Can anyone help me
When building an airplane , does each part get sliced?
Cura won't let me change infill settings. What am I missing
What I got:
Lighting: Creating lighting pattern that gives top layers enough structure to print over it, perfect for prototyping Lighting: Creating lighting pattern that gives top layers enough structure to print over it, perfect for prototyping .
Connecting Infill Line Setting: continuous infill line, adds a bit strength and stability.
Infill Line Direction Setting: adds strength or flexibility to a certain direction.
Infill Offset Setting: changing center of infill is useful in low-density print.
Infill Line Multiplier Setting: increasing the no of infill lines, huge boost for strength in expense of time & filament.
- Connect Infill Polygons : saves times while using Multipliers.
Extra Infill Wall Count Setting: creates an extra infill wall for the next layer same as wall but printed as infill.
Infill Overlap Percentage Setting: alternate to extra wall. How much Infill overlaps with walls.
Gradual Infill: works as an interface for the top layers to save Time & Print and ensure top layers printed perfectly.
Gradual Infill Steps Height: Distance from top layers to the first infill density step.
Infill Before Walls: great for model that have inner over-hangs.
Minimum Infill Area : awesome setting that prints small area as sold to make it a lot stronger
Infill Supports: creates infill only in the only areas that needs infill.
Suspect there may be times that high percentage infill is stronger than 100% as helps transmit force through the part. But nit picking
You are a guru on unfill. But the travel on my infill is stupid waist of time. I can send you my Cura slicer file if you want to try to figure it out. PLEASE. It wouldn't reduce the print time without the extra travel a huge amount
Kip = DangIt
Is it just me or does anyone else not feel comfortable with Cura not saving Print Settings without an account, where they want to be able to use your projects and change your products....ANYONE!
Tutorials are great, but I really want to shave your face. Less face screen time, more project screen time please.
How to add you on discord