Th back stop timber prevents the job getting spat out backwards. However if you have the kit to turn a 4’ dia block why not make a cone and be done with it?
I suspect there's a pivot on the backstop as well, to prevent the piece flying off. He's just holding it at regular angles to make the cuts. I think this piece is a wedge stopper of some sort.
Очуметь😂сколько говна в нэте.Снимает кто хочет например бабушки,малые дети придурки наконец.А потом выкладывают кто что-то жрет как свинья,то кто-то танцует как рахит,а кто-то рукодельничает вот так.
I'm assuming this is an insert and twist arrangement? I suspect, given the girth of this specific lavatorial accessory, it's meant for a fisting enthusiast.
Love the eyeballing cuts....when in doubt just cut randomly and hope for the best, and I'm being very sarcastic just for the record lol This was a waste of time and belongs on a tic Tok ad honestly
@@christopherd5941 Well, toes are not like thumbs, Toes are not imposable. But with a little talent you flick them up in the air a catch them with your teeth. Just gotta watch for seagulls. I was having a smoke while feeding them French fries. Then flicked my smoke and one grabbed it lit. He didnt stick around for fries anymore.
Не совсем так. Если квадрат Малевича это издевательство над здравым смыслом , то , вспоминая уроки труда в школе на станках, это было бы отличным упражнением на циркулярке с развитим пространственного мышления. :) Да, о чём это я... :(
Ты ведь даже и предположить не можешь, в силу невежества, что если удалить промежутки (например, сделав очень много пропилов, сохраняя горизонтальность оси заготовки), то получим поверхность второго порядка, называемую " однополостной гиперболоид вращения". Найди в Гугле; посмотришь что это такое.
Это - центробежный аквазавихрениватель для аквариума. Рыбки используют его как икрометатель.Покупайте, не пожилеете, пока они ещё не подорожали.Не благодарите.
ы ведь даже и предположить не можешь, в силу невежества, что если удалить промежутки (например, сделав очень много пропилов, сохраняя горизонтальность оси заготовки), то получим поверхность второго порядка, называемую " однополостной гиперболоид вращения". Найди в Гугле; посмотришь что это такое.
His fingers don’t even come close to the blade! This man is very talented and knows what he is doing half the people commenting most likely have never even used a table saw lol.
@@user-mc6do5nn1w долб@еб он(автор ролика). Есть токарный станок для таких деталей. А на круглопильном ему либо эта болванка в будку прилетит, либо сосисок на руках не досчитается через "100" затычек.
Это деталь часть турбины, самолетного двигателя, туда только деревянные лопатки вставить и в небо... Главное керасин нужен только для взлета, а дальше пока горит куда-то летит..😅
Это крыльчатка турбины импортозамещенного турбодизеля. Я уже видел видос про деревянные поршня. Лично я бы сначала разметил детальку, да и упор поставил...
Я часто видел амбициозных новичков, вытворяющих крутые вещи на станках. Что-то типа. "видал как я могу". К счастью до первого отлетевшего пальца. Почему к счастью, потому что потом всё-таки включается инстинкт самосохранения. Сам таким был, 26лет в столярке, все пальцы на месте, два из которых благополучно пришиты.
Now tape it and pour blue resin in it 💙 . Inlay for lamp of course 😉but If you insist break off the pieces.Sand into a cone shape , add dowels spaced apart and make a table center piece for fruit , spheres , pinecone etc 😉
I see you show us how we shell NOT do that. 😂🫢 - no chip extraktion system - no splitting wedge - standing behind the sawblade - no eye protektion - no earprotektion - no breathing mask Ok, the last 3 points are guess, but im sure to 80 % that it is... That's the way you do that in the dangerous way for your health...
You can see the riving knife (if that's what you mean by splitting edge) in the shot... It's useless however because he doesn't even get far enough. But overall it's stupid and a great way to lose fingers. Just look how hard his upper fingers are grabbing the work piece. If it kicks, his fingers slip right into it
@@bastian6173 wedge not edge. I googled the english name, maybe it's wrong. I mean that tool behind the sawblade, what is saving from the kickback, when the full wood is going to close the cut behiand the sawblade.
I like the part at the end when we are shown the bottom, expecting something cool and then getting nothing for our time. I can't wait to upload my dog licking his ball
Why? Don't do that. Why would you do that? Why would you post it? That thing can't be worth this risk. Why didn't you measure the spacing? What is it even for? Why'd you record every cut? What is the point of this object, this video, or life itself? What does it mean? WHO AM I!? Great. Stupid short got me existential. I've never felt so confused and robbed by a YT short. I want a refund. I'm taking one of your likes with me.
Biggest waste of two minutes of my life!!!
such a waste he had to watch it twice 😂
*not according to his wife… but, I digress
Intentionally wasting our time 😅
tres retardados detectados 😂😂
😂😂😂😂😂 la verdad que si.😂😂😂
❌Measure twice, cut once
✅Don’t measure, cut 13 times
The markings will be at the back of the wood. Nobody is that accurate that I've ever seen in 50 years.
@@makethingsinteresting496, possibly.
You think he's not cutting what he wants to cut?
А чего он хочет?@@histguy101
The best part about this video is the comments.
😂😂😂
❤
The end is pretty good too.
I'll say this, nothing scares me more than a round, unsecured object on a tablesaw.
That's second for me. The U.S government is number 1.
@@throngcleaver For over 15 years I have had and love to wear a T-shirt that says "I love my country, it is the government that scares me!"
@@ZigamusRainbowWizard 😁👍
Th back stop timber prevents the job getting spat out backwards. However if you have the kit to turn a 4’ dia block why not make a cone and be done with it?
I suspect there's a pivot on the backstop as well, to prevent the piece flying off. He's just holding it at regular angles to make the cuts. I think this piece is a wedge stopper of some sort.
I like the part where they show us the end result.
And it ends. Yeah, what a relief.
The end result was all 10 fingers still attached, which was better than I expected to be honest.
The best part of this junk is that no matter how negative the comments are here, the channel owner likes almost every comment.
Does he speak english? ....
@@alessandroricci7294ему помогает гугл-переводчик...
You Disrespectful twat
Prolly not@@alessandroricci7294
Bot?
It’s very amazing, clean cuts, nice offset angle, so perfect on the cuts, extremely precise! He’ll never need to make another one after this!
Главный вопрос для чего???
А главное - нахуя?
Подозреваю, что задумывалась салфетница😮
@@Cynevscyкак блет?
да у парня по ходу лишние фаланги пальцев
Probably part two.
Вот так из полена точится спичка!!!
Да вы чё?эта херня для всего подходит😂была бы эта херня у меня,я бы её для всего использовал😂
это коническая пробка подходит для зада, будешь ее применять по назначению?
@@samuilrivkin4558да ты продвинутый
@@steampunkmeister человек на видео изготавливает пробку для винной бочки, а столько срача в комментариях от того, что им это непонятно
@@samuilrivkin4558 так, Вы, сами не очень вежливо ответили предыдущему оратору. Спасибо за информацию.
@@steampunkmeister подкупила готовность использовать эту пробку везде)))
Wow!!! So THAT'S how they make those!!!!
😊😊
What is it?
I usually just buy them at the supermarket, but I guess it's interesting to see how they're made 🤷
Lmfao, that one got me bro
I approve of this comment. +1
Не дай Бог такого соседа, который всякую хрень пилит, потому что ему нравится пилить. Голову не мешало бы у психиатра проверить.
Зря только время потерял, думал путное что будет..
😊😊
Шгн
Así es no lo encuentro algo interesante
😊😊😊
Очуметь😂сколько говна в нэте.Снимает кто хочет например бабушки,малые дети придурки наконец.А потом выкладывают кто что-то жрет как свинья,то кто-то танцует как рахит,а кто-то рукодельничает вот так.
Thats the worst toilet paper ive ever seen. Too many splinters for my liking
I agree that video IS SHIT
I'm assuming this is an insert and twist arrangement? I suspect, given the girth of this specific lavatorial accessory, it's meant for a fisting enthusiast.
Всех обманул. Просмотров 21 млн 😅 а ничего не показал!!
Гениально!
Love the eyeballing cuts....when in doubt just cut randomly and hope for the best, and I'm being very sarcastic just for the record lol This was a waste of time and belongs on a tic Tok ad honestly
He loves you for the advice lol ❤
It could be marked on the back, lining up on the jig. The question remains as to wtf it is...
This video reminds me of when Beavis & Butthead took wood shop in high school.
B&B 1990's flashback -- love it 👍
Looks like a great way to lose a couple of fingers.
But it's so worth it. Do you know how valuable that, um, thing is?
Моя собака яйца лижет когда ей делать нечего
I came in here just to see if someone said something like that
And waste wood
Ok now what?
14 cuts, 10 fingers. I wouldnt worry too much about the last four cuts. You should be thinking about how you're going to pick up your 10 fingers.
With his toes, obviously. Jesus man, don’t you think about these things?
@@christopherd5941 Well, toes are not like thumbs, Toes are not imposable. But with a little talent you flick them up in the air a catch them with your teeth. Just gotta watch for seagulls.
I was having a smoke while feeding them French fries. Then flicked my smoke and one grabbed it lit. He didnt stick around for fries anymore.
You only have 10 fingers , Until you don’t. Be Carefull that is not a safe way to use the table saw !
The only safe way to use a table saw is to pay attention to what the hell your doing or leave it unplugged as a table !!!!!
Thanks Captain Obvious
@@calibos3329 no problem . My pleasure
В России все пользуются и ничего.😂
It's just a box jig angled for a repetitive cut ... But still just a box jig. I may have made the handle a bit bigger, but this works too.
Гениальное изделие! Ничуть не хуже квадрата Малевича🎉🎉🎉
Сделал конус усеченный
Не совсем так. Если квадрат Малевича это издевательство над здравым смыслом , то , вспоминая уроки труда в школе на станках, это было бы отличным упражнением на циркулярке с развитим пространственного мышления. :)
Да, о чём это я... :(
@@user-hl7lg1zr4oпредставляешь сколько бы пальцев на том станке осталось?))
Ни сколько. Всё норма по техники безопасности и это факт @@user-ok6rp2so2t
Ты ведь даже и предположить не можешь, в силу невежества, что если удалить промежутки (например, сделав очень много пропилов, сохраняя горизонтальность оси заготовки), то получим поверхность второго порядка, называемую " однополостной гиперболоид вращения".
Найди в Гугле; посмотришь что это такое.
Это - центробежный аквазавихрениватель для аквариума. Рыбки используют его как икрометатель.Покупайте, не пожилеете, пока они ещё не подорожали.Не благодарите.
this guy wasted two minutes of my life and I want it back😅
Never put your hand over or past the blade
я один ждал когда пальцы полетят?😂
А дальше-то что? Или мужику просто звук циркулярки нравится?
Циркулярка го..но, от такой щепки задыхается!
У его наверно звук этот записан в мп3 и в наушниках слушает когда спать ложится
Вал с трещеткой, может часы деревянные собирает😊
ы ведь даже и предположить не можешь, в силу невежества, что если удалить промежутки (например, сделав очень много пропилов, сохраняя горизонтальность оси заготовки), то получим поверхность второго порядка, называемую " однополостной гиперболоид вращения".
Найди в Гугле; посмотришь что это такое.
Звук больше нравится его соседям. 😂
И куда теперь это творение надо засунуть.
plug anal français
Thợ điêu khắc chuyên nghiệp
Что же было видео не ускорить? Ждать устал, пока пройдёт, а результат всё равно никакой
What did you make from that? I wanted to see.
Is this some kind of musical instrument?
It’s a circular wooden lumbar with a bunch of cuts in it 😂😂😂
They made clickbait
KINDLING !
Money
Красиво получилось.!
Туда можно втыкать салфетки веером.!🫠😏👍
Excelente sua ideia. Deus abençoe a Russia Ucrânia e o mundo inteiro.
Eu também achei muito interessante a ideia do vídeo. Pode ser feito com mais precisão.
His fingers don’t even come close to the blade! This man is very talented and knows what he is doing half the people commenting most likely have never even used a table saw lol.
At some point in life id wager you having something sewn back in place sir!
Ух, ты! А нахрена это? 😮😮😮
Наверное дальше надо как-то наждачку установить..
Это черновая для затычки в бочку!
@@user-mc6do5nn1w долб@еб он(автор ролика). Есть токарный станок для таких деталей. А на круглопильном ему либо эта болванка в будку прилетит, либо сосисок на руках не досчитается через "100" затычек.
Это деталь часть турбины, самолетного двигателя, туда только деревянные лопатки вставить и в небо... Главное керасин нужен только для взлета, а дальше пока горит куда-то летит..😅
Это крыльчатка турбины импортозамещенного турбодизеля. Я уже видел видос про деревянные поршня.
Лично я бы сначала разметил детальку, да и упор поставил...
В следующий раз карандаш заточим таким способом
That was kind of hard to watch.
По технике безопасности всё нормально и изделие СУПЕР КРУТО ЖЕСТЬ 👍МАСТЕР
You got me with the time wasting thing
Браво 😂😂😂я не думал что это так залипательно😂😂😂
Глюковина получилась!
😅😊งบ
В чем я провинился перед ютуб, что заслужил эту рекомендацию?
That piece will be useful in so many situations
Is that sarcasm font?
Всім , хто запитує , для чого це - для коментарів😂. І ми їх зробили❤
From a safety perspective, this guy does so many things wrong, and the results are just lack luster.
I liked the part where the dog came home and they all ate jello.
Какой красивый шмондибобер получился
Блин, только за чипсами сбегал, пиво открыл - и кино кончилось! Я требую продолжения!!
магазин рядом?)) иди
which crime did I now commit on UA-cam that I get this recommended for punishment?!
Watching him cut that was giving me an anxiety attack lol.
Единственное о чем я пожалел в жизни, это досмотоел этот ролик до конца!
Ты не один такой... Нас много!
А я сразу перемотал и посмотрел что будет 😂
Так делают пробки для больших винных бочек!
Изготовление пробок для винных бочек!
@@kozlov-ivan. На токарнике было бы проще. и безопаснее.
I've never seen a table saw from that angle never realized how much moisture was in the wood
It’s too wet.
Я часто видел амбициозных новичков, вытворяющих крутые вещи на станках. Что-то типа. "видал как я могу". К счастью до первого отлетевшего пальца. Почему к счастью, потому что потом всё-таки включается инстинкт самосохранения. Сам таким был, 26лет в столярке, все пальцы на месте, два из которых благополучно пришиты.
Gives me anxiety watching that guy cut this with his bare fingers so close to the blade
Wow I felt real nervous watching that . This process requires a re- think.
This process requires a re- think.if I'm sane or retarded . it would be an idleness test ?
На удивление что у него пальцы целые
Die Finger sind ok, aber im Kopf passt es nicht. Sonst würde er nicht so einen Mist machen.
For the moment they are still intact, but . . .
Зашёл в коменты.... в надежде, что хоть кто то подскажет для чего сеи извращения.... Но увы.
Надо же, и пальцы у него ещё все на месте! Респект!
This is insecure... And not functional
Now tape it and pour blue resin in it 💙 . Inlay for lamp of course 😉but If you insist break off the pieces.Sand into a cone shape , add dowels spaced apart and make a table center piece for fruit , spheres , pinecone etc 😉
Sometimes I lay in bed thinking “I think today is the day I want to lose my fingers on my table saw.
I can’t believe I watched it too the end
Теперь покрасит и выбросить
Why is he making that? Is it a part for some other contraption? Napkin holder?
Yea. I'd like to know it as well... I guess we are too curious and too goal oriented: what's the point making this?! :D
Well jeeze, isn't it obvious? I mean come on, we use them everyday
@@edgewatersbestguitarist1524 yeah, with the 3 sea shells
Is it just me or is woodworking super satisfying!!
One simply does not walk into work without doing one of these bad boys up.
I don’t know what it is, but I like it. 👍🏻
Now just don't drop it.
Looking through the comments and still dont know whatbim looking at...
I like the part where we have to guess wtf it actually does.
Два вопроса: нахрена и зачем... Тебе лишние пальцы...
I see you show us how we shell NOT do that. 😂🫢
- no chip extraktion system
- no splitting wedge
- standing behind the sawblade
- no eye protektion
- no earprotektion
- no breathing mask
Ok, the last 3 points are guess, but im sure to 80 % that it is...
That's the way you do that in the dangerous way for your health...
You can see the riving knife (if that's what you mean by splitting edge) in the shot... It's useless however because he doesn't even get far enough. But overall it's stupid and a great way to lose fingers. Just look how hard his upper fingers are grabbing the work piece. If it kicks, his fingers slip right into it
@@bastian6173 wedge not edge.
I googled the english name, maybe it's wrong. I mean that tool behind the sawblade, what is saving from the kickback, when the full wood is going to close the cut behiand the sawblade.
@@TheHidekisama yes - that's called a riving knife
Bwahaha.
Chip extraction...
On a table saw! Hahaha 😂
Жизнь вообще-то боль..ну а тут немножко больше..
So that's how you make click bait!
13 times I thought “dude your fingers 😱”
That looks useful
И на глюкало не похоже.
Excellent. Now give it a coat of paint and throw it in the trash can.
I like the part at the end when we are shown the bottom, expecting something cool and then getting nothing for our time. I can't wait to upload my dog licking his ball
Why? Don't do that. Why would you do that? Why would you post it? That thing can't be worth this risk. Why didn't you measure the spacing? What is it even for? Why'd you record every cut? What is the point of this object, this video, or life itself? What does it mean? WHO AM I!?
Great. Stupid short got me existential. I've never felt so confused and robbed by a YT short. I want a refund. I'm taking one of your likes with me.
И что?
😊 ах , НУ - ДА, ну да...как я до этого раньше не додумался
SENSACIONAL 👏🏻👏🏻
Чё к чему?
Just seems like a waste of time, effort, electricity and wood to me.
He woke up hating himself again today.
뭐임?
В сумашедшем доме и валенок е.ут.
Another bit of completely useless information. SO WHAT THE HELL IS IT FOR.
Деревянный чувак изобретает деревянную турбину. 😂
Wtf is this for?
cái này chắc ko phải hình kim tự tháp đâu bạn nhỉ?
👍🏼Вещь оригинальная получилась!
This is how pineapple is made..
Красиво .Но для чего это ?
Очень хорошо горит с завихрениями не потушить..😊😅
And the friggin point is like listening to a Donald Trump Speech😮
I like the end because it’s the end of this short 🤣
Great! And what do you do with it now? OK, because of the slits it burns faster in the oven. Really good!
Теперь меня не только Томас Шелби напрягает .
أَكْثِرُوا مِنْ قَوْلِ : لَا حَوْلَ وَلَا قُوَّةَ إِلَّا بِاللَّهِ ، فَإِنَّهَا كَنْزٌ مِنْ كُنُوزِ الْجَنَّةِ🌻🌙
No fingers were lost in the making of this video, but could have.
Когда у тебя есть циркулярка и куча свободного времени
That's a really quick way of losing some fingers!