Convert Cisco Access point AIR-AP1852I-S-K9 from ROMMON to Mobility Express mode (Successfully 100%)

Cisco provides two types of firmware for access point wave 2 (1815i, 1832i, 1852i, 2802i, 3802i..) Lightweight and Mobility Express. Mobility Express is firmware that allows the access point to act as a virtual controller that can administer other Lightweight APs in the network.
However, not AP is sold with Mobility Express firmware, so in this video I will show you how to convert ROMMON mode to Mobility Express mode.
Connect your computer to the LAN and make sure to ping from the computer to the AP and vice versa (note to turn off the window firewall to make sure the AP can ping the computer)
If you cannot reset by holding the mode button, press ESC into ROMMON and enter the command
extract tar file and select boot device to part.bin file in computer
setenv ipaddr 192.168.1.40
setenv netmask 255.255.255.0
setenv gatewayip 192.168.1.1
setenv serverip 192.168.1.20
...
...
bootipq tftp
I like using the " logging console disable" command as soon as I login in order to keep the log messages away from the console interface. Therefore, they won’t get in my way while I configure the AP and upgrade the software images.
Cisco 1852i convert to ME
Username: Cisco
Password: Cisco
Command using in this video.
apciscoshell
ap-type capwap
capwap ap erase all
Part 1:Convert Cisco AIR-AP1852I-S-K9 to Mobility Express, %Authentication failed
No valid user found please configure a valid user from Controller
Link: • Convert Cisco AIR-AP18...
Part 2: Convert Cisco AIR-AP1852I-S-K9 from Mobility Express to Lightweight ( CAPWAP MODE) (Use Controller )
Link: • Convert Cisco AIR-AP18...
Part 3: Convert Cisco Access point AIR-AP1852I-S-K9 from ROMMON to Mobility Express mode (Successfully 100%)
Link: • Convert Cisco Access p...
🤝Donate us: www.paypal.com...
Subcribe Us : www.youtube.co...
Contact : Tien Dung Do
📍Telegram group: t.me/CCNP300_410
📍Facebook: 100010133917307
📍 UA-cam: / @exploitoperate