Yes this works here are full instructions lifted from another YT vid... 1. Apply the parking brake. 2. Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission. 3. Turn the ignition switch to position 0. 4. Close all the vehicle doors from the inside of the vehicle. Then 1. Unbuckle the driver safety belt. 2. Turn the ignition switch to position II. (Do not start the engine). 3. WAIT AT LEAST 15 SECONDS 4. The remaining steps must be completed within 60 seconds or the procedure must be repeated. 5. Buckle then unbuckle the safety belt nine times, ending with the safety belt unbuckled. 6. The safety belt warning indicator flashes three times to confirm the belt minder status change. 7. Turn the ignition switch to position 0. After confirmation, the deactivation / activation procedure is complete.
The cluster isn't showing every fault the car has ever had, it's showing active (present) fault codes. Your plug-in scanner is likely only showing basic OBD2 codes. The cluster will show manufacturer specific fault codes as well. A decent scanner will be able to clear those codes.
I'm having issues with my 2009 Mondeo today the controls on the right hand side of the steering wheel with OK in the middle and the left, right up down buttons isnt working.was working couple days ago ? Would it be a fuse or do you have any idea what could be wrong
I have childlock malfunction on the screen and even when the car is turned off , it wont come off for 90 minutes , the locks are fixed so im not sure what it coukd be , any suggestions?
Good morning! Do you help me? How can I connected bluetooth mobile phone whith car for watching UA-cam? If you not understand me, I can translate whith Google. I am speak english not very well
Hey @Motors&Me.. I have got issues with my mondeo 2008 tdci 1.8ltr and it's showing "Immobiliser Active" on screen. Any idea how to fix it? My battery is fine and no issues with switches don't know how it's got activated
You need to reset your battery monitoring system. If the system thinks your battery is old it will warn you so you don't run it flat using the stereo or whatever. On a mk4 mondeo you switch on the ignition, press the fog light button 5 times, then the hazard light button 3 times. The battery light will flash 3 times. That's it.
Are you sure the fault code reads fo06? Because usually there should be more numbers. Just do a search in google and you should be able to find what they mean ;)
Do you know how to switch off the folding mirrors?
Can you tell me if Ford Mondeo 2010 model has Digital speedometer option? I'm not used to with analog odometer. Please reply with solution of possible
Hey.
Do you know how to silence the driver seatbelt?
Put the buckle in and out nine times in quick succession.?.it will turn off.
Yes this works here are full instructions lifted from another YT vid...
1. Apply the parking brake.
2. Place the transmission selector lever in P (Park) - vehicles with automatic transmission or the neutral position - vehicles with manual transmission.
3. Turn the ignition switch to position 0.
4. Close all the vehicle doors from the inside of the vehicle.
Then
1. Unbuckle the driver safety belt.
2. Turn the ignition switch to position II. (Do not start the engine).
3. WAIT AT LEAST 15 SECONDS
4. The remaining steps must be completed within 60 seconds or the procedure must be repeated.
5. Buckle then unbuckle the safety belt nine times, ending with the safety belt unbuckled.
6. The safety belt warning indicator flashes three times to confirm the belt minder status change.
7. Turn the ignition switch to position 0.
After confirmation, the deactivation / activation procedure is complete.
The cluster isn't showing every fault the car has ever had, it's showing active (present) fault codes. Your plug-in scanner is likely only showing basic OBD2 codes. The cluster will show manufacturer specific fault codes as well. A decent scanner will be able to clear those codes.
So there are problems in the present, not in the past?
@@xAditza if they're showing in the cluster, yes. The faults might not be being detected right now, but the codes haven't been cleared.
@@PipeManPeep it appears in the hidden menu, dtc01
I'm having issues with my 2009 Mondeo
today the controls on the right hand side of the steering wheel with OK in the middle and the left, right up down buttons isnt working.was working couple days ago ? Would it be a fuse or do you have any idea what could be wrong
I have childlock malfunction on the screen and even when the car is turned off , it wont come off for 90 minutes , the locks are fixed so im not sure what it coukd be , any suggestions?
Good morning! Do you help me? How can I connected bluetooth mobile phone whith car for watching UA-cam?
If you not understand me, I can translate whith Google. I am speak english not very well
Hey @Motors&Me.. I have got issues with my mondeo 2008 tdci 1.8ltr and it's showing "Immobiliser Active" on screen. Any idea how to fix it? My battery is fine and no issues with switches don't know how it's got activated
My battery is quite new and is showing the same reading as yours.
What is the solution? Because of lockdown we are restricted form driving far
You need to reset your battery monitoring system.
If the system thinks your battery is old it will warn you so you don't run it flat using the stereo or whatever.
On a mk4 mondeo you switch on the ignition, press the fog light button 5 times, then the hazard light button 3 times.
The battery light will flash 3 times.
That's it.
How did you find what the fault codes mean mine was fo 06
Are you sure the fault code reads fo06? Because usually there should be more numbers. Just do a search in google and you should be able to find what they mean ;)
Hello mine appears the engine light on and when it lights it loses strength I would like to know if anyone knows what is the problem that can help me
Maybe your mass air sensor
do the diagnostic first can be many problems
I couldn't find the "any" button.
My ford mondeo is stuck on reset trip wont leave me move down through menu
Mine just says TEST
Cheers for that!,
Thank you
Thx never knew
Noderīgi ;)